主要分析带有减载结构的板桩墙的设计及结构内力计算。
It mainly analyzes the design and internal structural force calculation for the sheet-pile retaining wall with load-relieving structures.
在理想线弹性范围内，推导了在竖向荷载作用下单向索-板结构内力计算的解析表达式。
Considered within the framework of the ideal line flexibility, this paper derives the analytical expression of the one-way cable-slab structure's internal force calculation in the vertical load.
基于试验数据并结合实际工程，提出了空间钢桁架结构内力计算模型，及有关节点域设计的初步建议。
Based on the test results and the practical engineering, the calculate mode of the air-cooled condenser structure system and the original design methods about the joint are pointed out.
本文主要介绍该输送机三角形支架的结构设计、内力分析、强度和刚度的计算。
This paper mainly discusses the structure design, internal force analysis and calculation on strength and rigidity of the conveyor triangle frame.
从水池的结构形式、水池的荷载、水池的计算模型、荷载组合及内力计算、水池构造要求几方面分析了水池设计的要点。
It analyzes the design elements of the pool from several aspects including the pool structure, load, computing model, load combination and internal force calculation and structural requirements.
提出一种采用连续化方法对高层框架—剪力墙结构在侧向荷载作用下的位移、内力及相互作用的计算方法。
The paper puts forward a kind of calculating method for displacement, internal force and interaction of high-rise frame-shear wall structure under lateral load by using continuity method.
此结果可广泛用于其它相似结构、相似荷载的内力计算。
It is suitable for calculating the internal forces of other similar structures and loads.
根据结构设计的需要，可以计算多个任意截面的内力。
The internal force in majority section can be calculated to satisfy the requirement of the construction design.
阐述了作用于PC轨道梁桥结构上的荷载，曲线pc轨道梁的内力计算，预应力计算，应力计算及组合。
The article have expounded the load acting on PC single track beam, and the calculation of curved PC single track beam including force, prestress and the stress etc.
提出移动荷载作用下杆系结构内力包络图的精确计算方法。
An exact method for computation of envelopes of various internal forces of skeletal structures under moving loads is developed.
阐述钢索结构的内力及位移计算的有限分析法。
A finite analysis calculation method of the internal force and displacement on the wire rope structure is presented.
将有限元处理的内力值与结构力学简化计算的内力值进行初步比较，查找分析产生差别的原因。
The internal force of the finite element method compares with the plane results of the mechanics of structure method, finding the differences between them, and then analyzing the reason.
在设计中，桥梁上部结构的计算着重分析了桥梁在施工过程中，恒载内力的计算。
In the design, in construction process of the structural calculation of the upper part in the continuous bridge, the permanent load were simulated and calculated.
根据结构内力影响线定理提出了一个用程序计算刚架影响线的通用算法。
According to internal force influence line theorem author advance the standard calculation method of rigid frame influence line by using programme.
水平基床系数是在计算深基坑的变形、支护结构的稳定性，以及桩在水平荷载下的位移、内力等方面有重要意义的参数。
Horizontal foundation modulus is an important parameter in calculating the deformation of deep excavation project, evaluating the stability of the retaining structure.
作者着重的从理论上分析了冷藏库结构的内力计算方法，并结合实例加以验正。
Author analyses the stress calculating method in cold store in theory, and validating by example.
桥梁桩基础是桥梁工程中典型构件，其内力计算的准确与否将直接关系到整个桥梁结构的安全。
Pile is a typical member in bridge structure. The precision of calculating its internal force will affect the whole bridge structure's safety.
利用国际著名的MARC非线性软件，针对基坑工程的特点，建立了围护结构和支撑内力的计算模型。
The paper sets up the calculating model of stresses in the support structures according to the character of excavation engineering, using the MARC program.
根据浅埋偏压隧道围岩的力学特性，采用荷载结构模型计算隧道支护内力及变形。
Basing on the rock mechanics property of shallow tunnel under unsymmetrical pressure, a load-structure model is used to calculate internal force and displacement of tunnel lining.
结构设计时可采用作者提出的实用空间法计算内力并进行配筋设计，用三维实体有限元方法校核主要受力断面的应力状态。
The practical space method for calculation of internal forces is adopted for structure design and the stresses of important cross section are checked by 3-D FEM.
目的研究解决弹性杆件结构在载荷作用下产生大变形时内力和变形量的精确计算问题。
This article aims to study large deformation and internal force of elastic truss structure under load.
利用塑性极限分析和非线性有限元分析方法计算并验证了结构在考虑次内力作用时的极限荷载。
Based on plastic analysis and non-linear finite element analysis, the structure's load-bearing capacity under secondary internal forces is calculated and certified.
通过内力计算并与传统梁板式码头的比较，结果表明该码头结构形式跨中内力明显减小。
Compared with ordinary continuous longitudinal girder, this type of wharf has an obvious decrease in internal forces.
可以应用于工程结构设计，便于快速得出网架结构挠度和内力的计算结果及分布规律。
It can be used in the preliminary design of engineering structures so that the internal forces and displacements of the space truss and their distributions can be obtained rapidly.
本文研究地下结构中常用的正交圆柱形岔壳的内力计算。
Stress analysis of orthogonally intersecting cylindrical shells usually used in the underground structure is studied in this paper.
为了解决这个问题，通过内力分析，用等效结构方法计算原结构内力，内力图不会失真。
Internal force figure would be fault if wer make simply use of these software to analysis the closed structure.
接着计算了竖向荷载作用下的结构内力，然后进行了地震，恒荷，活荷作用所得内力的几种组合。
Then the vertical load calculation of internal structure, then the earthquake, constant, live loading income of several combination.
建议进行复杂高层建筑结构内力与位移计算时，楼板宜按弹性考虑。
Therefore, the advice that a flexible diaphragm model should be adopted in calculating internal forces and displacements of complex tall building structure is presented.
针对上述问题，笔者推导了施工过程中地基变形和结构内力的计算公式，提出了考虑土结相互作用并模拟施工过程的实现方法。
Therefore, formulas of settlement and internal force of upper structure is deduced, realizing method considering soil structure interaction and construction process is put forward.
文中给出了这类网架结构拟板的基本方程式、弯曲刚度和剪切刚度的表达式以及由拟板内力换算成网架构件内力的一般计算公式。
The differential equation, the expressions for bending stiffness and shear stiffness of such space truss, as well as the formulas for calculating internal forces of its members are given.
应用推荐