也就是说，你所看到的是一条了不起的组合轴。
That is to say, it's a wonderful axis of combination that you're looking at.
导出了钢管混凝土柱弹性本构方程、组合轴压弹性模量和组合轴压刚度的理论计算公式。
The elastic constitutive equations, the composite elastic modulus and the composite axial compression stiffness of CFST are derived.
SCA在两个坐标轴上提供组合：引用组合与实现组合。
SCA provides composition on two axes: composition by reference and composition by implementation.
对播种机构进行了改进，设计了动力驱动粉碎刀轴与圆盘开沟器组合的防堵机构。
A new anti-blockage mechanism, which combines the powered chopping and disc opener, was designed and tested.
本文以多轴钻孔组合机床传动箱为实例，对系列产品装配图自动绘制的方法作了探讨。
This paper discusses the assembly drawing of series products as an example of the gear transmission of the multi-spindle head.
本文在总结前人工作的基础上，对结合梁斜拉桥中在轴力和弯矩共同作用下的钢—混凝土组合梁截面受力状态和混凝土桥面板有效宽度进行研究。
This paper deals with the mechanical behaviors of steel-concrete composite beam and effective width of concrete slab on the axial force and the bending moment together function, based on the past job.
通过制定切实可行的、合理的工艺方案，设计制造了四轴数控钻孔组合机床，加工质量和生产效率得到大幅度提高，经济和社会效益显著。
The combined machine tool can make machining quality and productivity improved substantially, and so give forth good social and economic benefit.
为了提高流管理，大厅的空间重新组合根据建筑物的轴。
To improve the management of streams, the space of the hall was recomposed according to the axis of the building.
分析了不可压缩刚粘塑性圆轴扭转和拉伸的组合变形。
The combined deformation due to torsion and tension of incompressible rigid viscoplastic circular shafts is analyzed.
研制出防止轴头甩油的离心密封和螺旋密封组合的新结构。
A new construction which combines centrifugal seal and screw seal has been developed.
它与三节点等参轴力杆单元组合时可以精确地模拟薄壁结构中杆与蒙皮之间的剪流作用。
Combining with three nodes isoparametric axial force element, the new element can be used to accurately calculate the shear flow action between bar and skin in thin-wall structure.
组合式系统整合单轴切碎机和挤塑机，无须配备预切设备。
Modular system, combination of single-shaft cutter and extruder. No pre-cutting equipment required.
本文探讨一种便于使用和推广的多轴钻组合机床计算机辅助设计的过程、步骤和方法以及其它一些基本问题的处理。
This article probes into the process step, method and the disposal of some other basic problems of a computer-aided design for multiple spindle drill unit, which is easy to use and popularize.
拨叉组合带动翻转板的端轴，使翻转板实现一前一后的翻转。
The dialing fork assembly drives the end shaft of the turnover plate for back and forth turnover.
本文主要介绍了单缸柴油机平衡轴两端圆柱轴径的一种多刀组合加工方法。
The paper mainly introduces a kind of multi-tool built-up processing method for balanced shaft diameter of single cylinder engine.
建立了混凝土单轴受拉、轴受压与双轴拉压组合条件下的随机损伤本构关系模型。
The stochastic damage constitutional law models of concrete under uniaxial tension, uniaxial compression and biaxial tension compression combination are established.
运用纵横弯曲连续梁理论和达朗伯原理，建立了偏轴钟摆钻具组合动力学分析模型。
A mechanical model for the offset-axes pendulum drill assembly (OAPDA) was established according to the continuous beam theory and the d.
建立了组合梁在任意边界条件下振动与稳定性的状态空间控制方程和振动频率与轴压载荷之间的相互关系式。
The state space equations for vibration and stability of composite laminated beams under axial compression have been derived for arbitrary boundary conditions.
组合式空心转子由于轴头与转子体之间的结合面存在着渗漏，使泵的抽气效率性能下降，从而影响其在应用中的效率。
As there were leak on contact place between shaft and rotor body in built up hollow rotor, dropping discharg gas speed of pump and efficiency applied of oil sealed sliding vane rotary vacuum pump.
用车床和外圆磨床组合的方式经济而高效地生产摊铺机双振捣轴，加工工装起着十分重要的作用。
While machining dual vibrating shaft for paver using lathe and circular grinding, the tools set up are very important.
在管式离心机受力分析的基础上，建立了管式离心机吊轴的力学计算模型，并对吊轴的弯扭组合下的疲劳与断裂安全性作了分析计算。
This article establish the mechanics model of pendent axis of tube style centrifugal machine, analysis and calculate the fatigue and fracture safety property of pendent axis.
目的研究使钢管-钢骨混凝土组合柱发生延性破坏时所需要确定的轴压比限值。
The study aims to find out the proper limited values of axial compression ratio of the steel tube-steel concrete composite column under the condition of ductility damage.
通过对钢-高性能混凝土组合桥塔节段进行轴压承载力试验，研究了组合桥塔的受力特性。
An axial compression test was carried out on a steel-high performance concrete composite bridge tower segment in order to study the mechanical behavior of composite bridge towers.
利用多轴组合钻解决瓶颈结构中螺孔的钻削问题，以提高劳动生产率，满足零件大批量生产的需要。
Describes how to solve the problems of drilling and cutting for screws in the structure of bottle neck, to improve production rate and meet the demand of batch production for spare parts.
利用约束指标，得出基于统一理论的新型组合短柱的轴压承载力公式。
Formulas with restriction index based on the unified theory, and used for predicting the ultimate bearing capacity of the short composite column, are proposed.
从挠性陀螺组合安装误差模型入手，推导出存在轴不对准角情况下的挠性陀螺组合静态误差标定模型，并给出静态误差标定的位置试验方案。
The installation error model of the gyroscope integrated is analyzed, and then error calibration model of flexible gyroscope integrated is deduced when malalignment Angle is considered.
为了进一步进行整体结构施工阶段分析，本文继而用组合徐变系数来表达钢管混凝土轴压构件的徐变变形。
For the sake of further analysis on the overall structure in the construction phase, composite creep coefficient is adopted to express the creep behavior of centric loaded CFST members.
该模型能够用于求解钻头处的侧向力和转角以及偏轴接头处的侧向力，以评价钻具组合的防斜（纠斜）能力和偏轴接头附近的偏磨程度。
The lateral force on offset-axes sub can be calculated and used to evaluate the eccentrically wearing degree near the offset-axes sub.
为了达到卫星三轴姿态确定的精度要求，以某一对地定向的小卫星为研究对象，提出了基于滤波算法的星敏感器和光纤陀螺组合定姿的方案。
A filtering algorithm for high precision attitude determination of a specific satellite is presented based on star-sensors and fiber optic gyroscopes (FOG).
转动轴用轴套安装组合件涉及固定安装在转动轴上的护轴轴套领域。
A shaft sleeve installation assembly for a rotation shaft relates to the field for a shaft protecting sleeve on the rotation shaft.
应用推荐