分析了一种冷冲模在用线切割方法加工型腔时发生开裂的原因，提出了防止开裂的措施。
Analyzes the causes of cracking that arised in a type of die under machining of die space with wire arc cutting. Suggests preventative methods of cracking.
为使复杂型腔能在加工中保证锥度及尺寸要求，必须以线切割机床的精度和可靠的编程方法为前提。
In order to ensure requirement of taper and size in machining complex mold cavity, it must depend on precision and reliable programming method of WEDM machine.
针对高速走丝线切割机易断丝的问题，详细地分析了钼丝易断的原因和解决方法，并在实践中取得了令人满意的效果。
Molybdenum wire of HS WEDM is easily broken. For solving this problem, the causes and dealing methods are present in this paper, which have a satisfactory effective in practice.
提出了确定嵌入式三维接口线切割轨迹的画法几何方法。
A descriptive geometry method is presented to obtain the track of wire incision in processing the three dimensional cut.
介绍了用3B格式在数控线切割机床上加工等距型面旋转活塞的编程方法。
It introduces the programming method to cutting Revolving piston of equal distance plane on numerical control linear cutting machine by 3b format.
提出了牙嵌式三维接口线切割轨迹的数学放样方法。
A mathematical layout method was developed to obtain the track of WEDM in processing the three dimensional cut.
介绍了在数控线切割机床上加工等距型三弧孔的3B格式编程方法。
This paper introduces the programming method for machining equal length three are hole on numerical control wire-machine tool by 3B format.
分析线切割工作液的工作特点及工作状态，从生产实践中总结出科学合理选择使用工作液的方法。
The article analyzes the characteristic and the working condition of the cutting fluid using in electrical discharge machining (EDM).
本文主要介绍了FUNAC线切割机床锥度切割的方法，重点介绍了当锥度有误差时，应如何进行补偿。
This article describes a method of FUNAC WEDM taper cutting, focusing on the error of taper cutting, and how to compensate for it.
方法96例消化道重建手术运用管状吻合器及直线切割缝合器。
Methods In 96 cases undergoing surgical reconstruction of digestive tract, anastomat and stapler were used.
分析了高速走丝线切割加工中影响加工精度与表面质量的主要因素，并针对这些原因分别给出各自有效的预防及处理方法。
The main factors that affect the machining precision and surface quality in high-speed wire cutting are analyzed. And the corresponding effective precautionary measures and handling methods are given.
叙述了在使用低速走丝电火花线切割机床加工精密模具时，一些常用的加工工艺技巧及编程方法。
Some commonly used machining process skill and programming method were introduced when using low speed WEDM machine to machine precision mold.
探讨在电火花线切割得到广泛应用的背景下，电火花线切割数控编程的手段和方法。
The article discusses the means and method of numerical control programming under the background that spark erosion wire cutting is applied extensively.
微细电化学线切割加工是最近出现的一种微细加工新方法。
Wire electrochemical micromachining(WEMM) is a recent new method for micro-machining.
通过对电火花线切割机床在加工过程中的特殊受力分析，给出步进电机的匹配选择方法。
This article introduced the matching selection of step motor for wire-cut electric discharge machine by analyzing the special stress of the machine.
通过对电极丝振动的ANSYS模拟，提出了降低电极丝振动以此来提高线切割机床加工质量的方法。
Through ANSYS simulation of vibration for the electrode wire. Proposed the measure of reduce vibration of electrode wire in order to improve the electrode wire cutting machine quality.
本文采用传统方法进行电火花线切割加工工艺参数优化，分别建立了加工速度和表面粗糙度的数学模型。
This article is about the processing parameter optimization achieved through the traditional method to set a mathematical model of the processing speed and surface roughness.
分析了电火花线切割机断丝原因，并相应地提出了解决方法。
This article analyzes the reason for broken wire in electric spark cutting machine and puts forward some solution.
分析了数控电火花线切割加工在塑料模加工中的应用场合，探讨了数控电火花线切割加工在塑料模加工应用中的几种特殊方法。
This paper analysis on CNC WEDM apply in the plastic mould process, and discuss special method of WEDM in the plastic mould process.
采用线切割的方法制作涡轮叶片砂芯芯盒，用该芯盒手工起模制作叶片砂芯。
Sand core for the blade was made by hand drawing the pattern from core box. The way of core making is feasible on a medium scale production.
介绍了数控电火花线切割加工冲裁模时基准模与非基准模补偿量的计算方法，并在此基础上得出一种快速编制非基准模加工程序的途径。
The paper introduces a calculating method of offset in the reference and unreference of blanking die in WEDM. And based on it, reach an approach to fast program for unreference die.
为此必须研制某种检测方法在浮法玻璃带退火窑出口处至浮法线切割之间区域进行质量检测，对不符合质量标准的玻璃缺陷在线切割。
So we must find a kind of detect method to detect the quality of this glass between the exit of furnace and linear cut location then cut the glass which is short of the standard at the product line.
本发明涉及一种多线切割机的清洗水循环利用方法及装置；
The invention relates to a method and a device for circularly utilizing washing water of a multi-line cutting machine.
还介绍了一种线切割内导柱孔方法，减少了制造过程中的一些环节。
In order to reduce manufacturing progress, a measure how to cut inward oriented hole is introduced.
这种方法主要用于线切割所不能解决的问题。
This kind of cuting can solve the problem which the liner cutting can't.
通过辅助电极利用高速走丝电火花线切割加工的方法对绝缘陶瓷氮化硅作了加工实验研究。
This paper investigates the high speed wire electrical-discharge machining (HSWEDM) of Si3N4-based ceramics by assisting electrode method.
通过辅助电极利用高速走丝电火花线切割加工的方法对绝缘陶瓷氮化硅作了加工实验研究。
This paper investigates the high speed wire electrical-discharge machining (HSWEDM) of Si3N4-based ceramics by assisting electrode method.
应用推荐