对冰盘抛光纳米加工进行了较为深入的分析与探讨。
Nano-machining of ice-desk polishing has been further analysed and discussed.
介绍了纳米加工技术，分析评价了国内外超精密加工的现状。
The paper introduces Namith processing technique, giving an analysis and evaluation of the su - per finishing situations both at home and abroad.
纳米加工是纳米技术的核心，也是实现下一代纳米器件的关键。
Nanofabrication is the key issue of nanotechnology, and also the critical event of achieving the invention of nanometer device.
研究人员使用纳米加工技术来创造与蝴蝶翅膀相同的鳞片结构，显示结果也同样色彩斑澜。
Researchers used nanofabrication techniques to create scales structurally identical to the butterflies’, and the structures presented the same gorgeous color.
而基于扫描探针显微镜(SPM)的纳米加工技术是迄今为止最为简单的一种纳米加工技术。
Moreover, nanofabrication technology based on SPM is by far the most simple of a nanofabrication technology.
在扫描探针纳米加工技术的基础上，提出了利用原子力显微镜（AFM）来制作高频光栅的新工艺。
On the basis of micro-fabrication technique using the atomic force microscope, a new method was proposed for producing high frequency grating.
本文介绍了扫描探针纳米加工技术的基本原理、应用前景和最新进展，并讨论了该技术的发展趋势。
The basic principle, application and new progress of nanolithography based on scanning probe microscopy, are described in this review. Then, the tendency of the research is proposed.
提出了一种新颖的基于微纳米加工技术的MOEMS空间谐振腔结构，介绍了其工作原理和系统构成。
A novel MOEMS spatial resonator based on micro-nano machining technology was put forward. The principle and structure of the resonator were introduced.
实验考虑了样品的表面状态，周围大气状况，所加电压的极性、大小和加压方式等影响纳米加工的因素。
Influential factors were considered including specimen's surface state, ambient atmosphere, polarity, magnitude and method of tip sample applied voltage.
本文介绍了在AFM针尖与氢钝化硅表面之间施加电场作用对硅表面进行修饰的纳米加工方法，重点讨论了加工机理。
In the paper a kind of patterning method was studied with voltage applied between the AFM tip and sample with emphasis on its mechanism.
最后，本文提供了一种简单、方便、有效且直径可控的，在硅基底上大面积形成纳米点阵或纳米柱阵列的纳米加工方法。
A large-area nanopillar fabrication method by nanoparticle monolayer as an etch mask is displayed, which can be used in kinds of nano film fabrication .
中心的研究方向，主要从事微纳米加工技术、微纳米材料以及微纳米器件与系统的研究与应用，并为国内外产业及研究机构服务。
Thee current research fields of the center are micro and nano fabrication technologies, micro and nano materials, and micro and nano systems.
制造这种物质，该小组把原料石墨磨碎，用化学品净化，把它重塑成“纳米结构”，然后再把它加工成纸张。
To make the material, the team milled raw graphite by purifying it with chemicals to reshape it into 'nano-structured configurations' which are then processed into sheets of paper.
本文介绍了纳米技术的广泛用途、加工技术，以及目前国际上最新的研究成果。
This paper introduces Nanometer technique, its extensive applications, process technologies and latest research results of the world.
Strano博士在《应用化学》杂志上表述了自己的发明的核心，这个核心是一排加工过的碳纳米管。
The core of Dr Strano's invention, which he describes in Angewandte Chemie, is an array of treated carbon nanotubes.
如果把双层石墨烯加工成细线（纳米带）状，带隙还能进一步扩大。
If the double-layer Graphene processed into light-weight (nanobelts), band-gap can further increased.
最后，采用各项异性的离子束(IBM)加工技术可以通过掩膜来蚀刻孔阵，以制成纳米多孔金属材料。
Last, a technique known as anisotropic ion beam milling (IBM) is used to etch through the mask to make an array of holes, creating the nanoporous metal.
试验表明，后处理加工中，低温等离子体对FX-2纳米粉体的表面处理能有效消除粉体的自发团聚；
Experiments show that the surface treatment of FX-2 nano powder by use of low temperature plasma can effectively remove the spontaneous agglomeration.
采用专门针对高硬材料加工的纳米古铜涂层。
Specialized Nano TiSin coating to process high harness mold material.
当宏观分析纳米木粉形状尺度时，依赖木材细胞模型形状计算和预测出的纳米尺寸可以满足纳米木粉工业化加工的要求。
When analyzing the macroscopical changes of nanometer wooden fibre form, the size relying on cell's model form satisfies the request that the timber industrialization of nanometer procession.
随着外加脉冲偏压的增大、脉冲时间的增加，加工得到的点状纳米结构的高度和半径会随之增加。
It is concluded that the height and the radius of nanostructures increase with the raising of the applied voltage and the pulse time.
着重讨论了纳米矿物材料的改性加工和制备技术及其应用性能；
Modification, preparation methods and application properties of nano mineral materials are discussed emphatically.
纳米凹凸棒土的加入一定程度上改善了复合材料的加工性能。
The processability of the composite was improved to some extent by the addition of n-ATP.
挤出共混法通过熔融混炼聚合物和纳米微粒可加工成稳定的纳米复合材料。
Extrusion blending method can process a stable nanometer compounding material through melt-mixing polymer and nanometer particle.
纳米技术可使高聚物增加韧性、强度和稳定性，可以改善高聚物的加工性能、抗老化性能或使材料功能化。
Nano technique can improve performance of high polymer in their toughness, intensity and stability. It can also improve processing properties, anti ageing and other functions of high polymer.
扫描探针显微镜(SPM)现在不仅用于表面微观形貌的检测，同时也用于纳米超精密加工和原子操纵。
Scanning probe microscope (SPM) is used not only for measuring the micro profiles of surfaces, but also for nano ultraprecise machining and atom manipulation now.
研究不同的加工温度、混炼设备、加工工艺对纳米氧化锌在BR胶料中分散性的影响。
The influence of the mixing temperature, mixer and processing technology on the dispersibility of nano-ZnO in BR compound was investigated.
在某些高粘度和强极性的橡胶基体中，利用常规的熔体混合加工方法，FS可以直接解离成纳米单晶或晶束。
Blend process FS can be directly separated into nano-crystal or bundles in some polymer matrices with higher viscosity and stronger molecular polarity by conventional melt blend.
在某些高粘度和强极性的橡胶基体中，利用常规的熔体混合加工方法，FS可以直接解离成纳米单晶或晶束。
Blend process FS can be directly separated into nano-crystal or bundles in some polymer matrices with higher viscosity and stronger molecular polarity by conventional melt blend.
应用推荐