经酸处理后共混纤维表面存在多孔结构。
Surface of blended fiber had porous structure after acid treatment.
聚酯纤维表面均匀光滑，无条纹，横截面呈圆形。
Polyester fibers have a smooth, uniform surface with no striations and are circular in cross section.
结果表明，棉纤维表面分维数与含糖量间存在定量关系。
As result, quantitative relations between the fractal dimension of cotton fiber surface and its sugar content can be made.
综述了近几年来国内外对PBO纤维表面改性研究的进展情况。
The domestic and international study progress in surface modification technology of PBO fiber is presented.
最近有人还指出，易于洗涤的纤维表面应该是疏油性的和亲水性的。
It has also been shown recently that, for ease of washing, the surface of the fibers should be oleophobic as well as hydrophilic.
处理后的纤维表面粗糙度增加，提高了纸页成形中纤维间的结合力。
The surface roughness increases after treatment, which can improve the physical bond between the fibers.
用等离子体处理PP纤维表面，可改善纤维水泥复合材料的界面状况。
The interfacial behavior of PP fiber reinforced cement composite was improved by plasma generation technique.
研究了不同染色助剂对高温高压染色中聚酯纤维表面低聚物含量的影响。
The effect of various dyeing assistants on the oligomer content in high temperature high pressure dyeing of polyester fibre surface was researched.
用于等离子清洗纤维表面，从而改变纤维表面性性质，提高纤维的性能。
He wants to plasma clean the surfaces of fibers in order to change the surface properties and further improve the performances of the fibers.
本文通过研究聚酯纤维表面形态结构的变化来探讨聚酯纤维的断裂过程。
Breaking process of PET fibers is discussed through analyzing changes of surface morphology of PET fibers in this paper.
研究了碱抽提乙醇麦草浆纤维表面的形貌学特征、化学组成和木素的分布。
The microscopic morphology, chemical composition and lignin distribution of alkaline-extracted ethanol wheat straw pulp were studied using AFM and XPS.
其内部是蜂窝结构，上下碳纤维表面、侧边以及后缘与蜂窝结构粘接在一起。
They have carbon-fiber top and bottom skins, sides and a trailing edge profile, bonded to a honeycomb core.
本文利用冷等离子体技术对石墨纤维表面进行了连续空气冷等离子表面处理。
In this paper, the surface of graphite fiber is treated continuously by using air-cold plasma.
通过单丝拔出法及NOL环试验对UHSPE纤维表面改性处理进行了表征。
The single fiber pull-out method and NOL ring test were used to characterize the surface modification properties of UHSPE fiber.
本研究目的系利用金属银抗菌的特性，在嫘萦系活性碳纤维表面进行镀银改质。
This study examines the properties and microstructure of viscose rayon-based activated carbon fiber (ACF) adsorbent modified by supporting silver.
石棉小体(斑)内的纤维表面基团和组织内的某些蛋白反应形成新的表面介体。
The surface radicals of asbestos fiber reacted with some albumen in tissue and formed new surface medial-matter.
本文用正交设计法研究了臭氧气体对炭纤维表面的连续氧化处理的最佳工艺参数。
In this paper was studied optimum technology parameter of the oxidation treatment in succession of the ozone gas against the surface of carbon fibers with the method of rhombic design.
为了提高沥青基炭纤维表面活性，采用臭氧氧化法对沥青基炭纤维表面进行改性。
Ozone method was used to modify surface activity of pitch carbon fiber to improve the interfacial adhesion between fibers and matrix.
炭纤维表面润湿性与某些酸性官能团的适量增加，有益于载体表面微生物的固着。
An increase in the number of some acid functional groups and surface wetting quality was helpful to microorganism fixing.
因为，诸如轮胎帘子绒的粘附性或地毯纱线的染色性能，都受纤维表面成份的影响。
Properties such as adhesion in the case of tire cords and dyeability in the case of carpet yarns can be affected by the surface composition of the fiber.
本文采用等离子体处理，对涤纶纤维表面进行改性，以提高纤维的浸润性和粘结性。
In this paper, the plasma treatment was used to modify the surface of PET fibres and increase the wettability and adhesivity of the fibres.
树脂组分在增强纤维表面发生竞争性吸附对rtm成型复合材料的性能产生重要影响。
The performances of a part produced by RTM process are influenced by the competitive adsorption of resin components onto fiber reinforcement.
本文还探讨了FPCPU的合成工艺、结构表征，以及接枝前后纤维表面的形貌特征变化。
The synthetic conditions, structural characterizations and the morphology changes of the fiber before and after grafting of the above FPCPU have been investigated.
纺丝过程中纤维皮层结构受到更大的拉伸取向作用，并在纤维表面出现一定游离原纤化结构。
A certain degree of free fibrillar structure was observed on the fiber surface due to the sheath structure of the fiber subjected to the greater drawing and orientation.
纤维表面处理改善了界面结合，使得UHMWPE3D/PMMA复合材料平衡吸湿量降低；
The results clearly show that the saturated moisture content of the UHMWPE3D/PMMA composites exhibited reduction for fiber surface treatment.
热源和加热方式的选择不但影响玻璃纤维表面处理产品性能质量，而且直接影响到生产成本。
The selection of heat source and heating method not only influences the quality of treated glass fiber products, but also influences the production cost directly.
主要目的是确定不同的漂白方法对硫酸盐针叶木浆纤维表面特性的影响，包括老化前和老化后。
The aim of this study was to determine the influence of different bleaching sequences on the fibre surface properties of softwood kraft pulp before and after ageing.
本文研究了PVC包覆处理对苎麻落麻纤维的吸水性、纤维表面状态、纤维单丝强度等的影响。
The effect of cover treatment with PVC on the absorptivity, filament strength and surface state of the noil ramie is studied in the paper.
汽爆麦草纤维表面特征的XPS分析结果也说明汽馒处理使纤维比表面积增加，余水性基团更多。
XPS results also demonstrated that the steam explosion could lead to the increase in the special surface area and the hydrophilic groups of the fiber.
汽爆麦草纤维表面特征的XPS分析结果也说明汽馒处理使纤维比表面积增加，余水性基团更多。
XPS results also demonstrated that the steam explosion could lead to the increase in the special surface area and the hydrophilic groups of the fiber.
应用推荐