结果表明浆种间纤维组分存在着较大的差别。
The results showed that the differences in fiber constituent of the pulps were large.
涤腈棉锦包氨FTY弹力织物是多种纤维组分的新型产品。
The polyester, acrylic, cotton and nylon wrapped polyurethane FTY knitted elastic fabric is one kind of multi-component new type product.
实验研究了纤维组分、直径和长径比对多晶铁纤维微波磁导率的影响。
The microwave permeability of polycrystalline iron fibers decreases with the increase of fiber diameter and increases with the increase of aspect ratio.
实验研究了纤维组分、直径和长径比对多晶铁纤维微波磁导率的影响。
The effects of fiber composition, diameter and aspect ratio on the microwave permeability of polycrystalline iron fiber have been studied in this paper.
此外，本发明提供了一种向使用者递送安全和有效量的纤维组分的方法。
Additionally a method of providing a safe and effective amount of fiber component to a user is provided.
通过红外光谱分析讨论混合办公废纸酶脱墨过程纤维组分特征官能团的变化。
Changes of function group in enzymatic deinking of mixed office waste pap er were studied through infrared spectra.
该文主要介绍在不对纤维组分进行预先分离的条件下，纤维化学特性的表征技术。
Direct characterization technologies for chemical analysis of fibers, without a previous separation of the components or component groups from each other, were reviewed.
同时，根据不同处理条件下秸秆纤维组分和显微结构的变化，对氨化机理进行探讨。
Moreover, by analyzing the changes of microstructure and fiber content of rice straw ammoniated, the mechanism of ammoniation was discussed.
结果表明，不同预处理方法均使剑麻纤维组分分离，杂质含量降低，纤维素含量提高。
Results show that, after pretreated, the contents of cellulose of sisal fiber increase and the contents of lignin decrease.
结果表明，离体培养24小时的原生质体表面产生一些突起小泡，有时可见少量纤维组分的形成。
The results showed that after 24 h in culture a number of protruding vesicles, as well as a small amount of fibrillar component were formed on the surface of protoplasts.
通过化学分析、扫描电镜(sem)及红外光谱(IR)等手段表征了处理前后剑麻纤维组分和结构的变化。
The structure and chemical composition of pretreated sisal fibers were investigated by chemical method, SEM and IR.
最后重点介绍了新纤维、非纤维素纤维及多组分纤维纺织品的染色。
At last, the dyeing processes of new fiber, non cellulose fiber and multi components fiber were introduced.
树脂组分在增强纤维表面发生竞争性吸附对rtm成型复合材料的性能产生重要影响。
The performances of a part produced by RTM process are influenced by the competitive adsorption of resin components onto fiber reinforcement.
首先，对粉单竹apmp法制浆和补充漂白前后，竹材的化学组分和纤维形态的变化进行了研究。
Firstly, we studied the changes of chemical ingredients and fiber morphology of Bambusa Chungii during APMP pulping and supplementary bleaching.
纤维增强混凝土是一种多相材料，其力学性能不仅取决于各组分材料的性能，同时也取决于材料的细观结构特性。
Fiber reinforced concrete is a kind of heterogeneous material, which mechanical properties not only rest with the performance of component material, but micro-structure characteristic of material.
以皮胶原纤维制备吸附材料，研究了这种吸附材料对茶多酚中各组分的吸附特性。
The collagen fibers of animal skin were used to prepare adsorbent material and its adsorption properties to functional components and caffeine of tea polyphenols were investigated.
以聚偏氟乙烯(PVDF)为第二组分聚合物与三醋酸纤维素(CTA)共混，通过冻胶法纺丝工艺制备成中空纤维纳滤膜。
Hollow fiber NF membrane was prepared with blending of PVDF as the second component polymer and CTA, and by spinning process with gelation method.
阐述了适合双组分纤维产品生产的设备的新进展。
It was demonstrated that the present progress of equipments which were well suited for demands of manufacture bi-component fiber products.
氨基酸组分分析是鉴别珍珠纤维的有效方法。
The analysis of amino acid composition is an efficient method for pearl fiber identification.
采用PE/PP双组分纤维，经梳理成网、热风粘合加固后制成蓬松、柔软的非织造布。
The soft and fluffy nonwoven is made with PE/PP bi-compound fiber after carding and hot-air through bonding.
探讨了聚丙烯腈原丝(PAN)的共聚组分、纯化、取向等方面对碳纤维强度的影响。
The effect of PAN precursor constitute, purity, tropism etc on the intensity of carbon fiber is discuss in more details.
苜蓿组纤维各组分的消化率均高于玉米秸秆组。
Digestibility of fiber ingredients in alfalfa group was higher than that in corn stalk group.
本研究从化学组分、纤维形态和表面性质三方面分析比较了麦秆纤维与木材纤维。
A analysis was focused on the chemical composition, morphology and surface characterization of both wheat straw fiber and wood fiber.
纸浆悬浮液是一种复杂的多组分体系，除了纸浆纤维和微细纤维外，还视纸种的不同而含有填料、淀粉及特定的化学助剂等。
Pulp slurry suspension is a complex multi-component system, it contents filler, starch and some other special chemical AIDS in addition to pulp fiber and fibril.
主要论述了微细纤维生产的常规纺丝方法和双组分纺丝法，以及微细纤维在服装、装饰品、无纺布、医学、航海等诸方面的应用。
The usual spinning method, the double constituent spinning method and the applications of clothing, decoration, nonwoven fabric, medicine and navigation etc of micro fiber are discussed mainly.
由于天然纤维素酶来源广泛，组分复杂，其分离纯化相当困难，使单一组分酶的应用受到一定的限制。
Because of diversity of nature cellulase sources, complexity of multi-components and difficult of separation, application of single cellulase component was much restricted.
研究了聚丙烯、抗静电组分、可染组分三元共混体系纤维的抗静电性能、力学性能、染色性能及形态结构。
The antistatic behaviour, mechanical property, dyeability and morphology of PP fiber blending with antistatic component and dyeable materials are studied.
纺织和地毯用有色化学纤维的生产，一般都涉及两种或多种组分加入一台单螺杆挤出机，在挤出机中使组分混合并挤出成丝。
Typically the production of man-made colored textile and carpet fibers involves the feeding of two or more components into a single screw extruder, where they are blended and extruded as a filament.
纺织和地毯用有色化学纤维的生产，一般都涉及两种或多种组分加入一台单螺杆挤出机，在挤出机中使组分混合并挤出成丝。
Typically the production of man-made colored textile and carpet fibers involves the feeding of two or more components into a single screw extruder, where they are blended and extruded as a filament.
应用推荐