给出了调速系统负载特性，改造的理论依据，改造过程及改造的设备系统选型。
It also gives the load characteristic of speed regulating system, the theoretical basis and practical process for alteration and selection of equipment.
这两个软件的用途是相同的，但是后者更安全并提供许多特性，可以在系统负载过重时限制访问。
Both pieces of software serve the same purpose, but the latter is more secure and offers many features to restrict and throttle access when a system's load rises.
工作负载分区：WPAR是与Solaris容器相似的操作系统虚拟化特性，它允许在一个AIX 6.1实例中创建多个AIX 6.1环境。
Workload partitions: operating systems virtualization, similar to Solaris containers, called WPARs allow for the creation of multiple AIX 6.1 environments inside of one AIX 6.1 instance.
在POWER 7系统上运行的大内存工作负载会受益于此特性。
Large memory workloads running on POWER7 systems benefit the most from this feature.
这个特性还允许执行多系统负载平衡，可以用来节约数据中心的成本。
The feature also lets you perform multi-system workload balancing, which can be used to conserve data center costs.
试验结果表明：负载质量在较大范围内变化时，应用电流变阻尼器可以有效地控制悬挂系统的行驶特性。
Results indicate that a significant degree of control over the ride characteristics for a wide range of sprung mass may be possible.
另外，本文设计了一种简单有效的伺服系统负载平台，得到了该负载平台的负载特性。
In addition, we design a simple and effective load platform for the servo system, and obtain the load property through rigorous derivation.
结果表明：在负载质量变化较大的范围内，能相当大程度地控制悬挂系统行驶特性。
Results indicate that a significant degree of control over the ride characteristics can be achieved in a wide range of load mass variation.
采煤机截割部是一个复杂的多体系统，其负载特性非常复杂，采用传统的计算方法研究其动态特性非常困难。
The shearer's ranging arm is a multi-body system and the load characteristic is very complicated, so it brings many difficulties to research dynamic property with traditional computational method.
通过研究分析了恒功率负载负阻抗特性的稳定问题，提出确保电源系统稳定的方法，仿真结果验证方法的可行性。
With the research on the stability of the CPL's negative impedance characteristic, this paper proposes guarantees for the power system to be stable, which are confirmed by the simulation result.
因此，有必要对其直流侧等效模型进行研究，从而揭示其作为前端变流系统的负载特性。
Thereby, it is necessary to study the DC-side equivalent model of the inverters and consequently reveal the load characters relative to their front converter systems.
实验结果表明，以“被测试电机-直流电力测功机-负载电阻”为结构、基于数字信号处理芯片的感应电动机转矩-转速特性自动测试系统是可行的。
The experimental results demonstrate: the automatic measurement system which bases on the DC dynamometer and DSP can well measure torque-speed characteristic of induction motor.
介绍一种新型的螺旋桨特性负载模拟装置，它是全数字控制的直流转矩伺服系统，采用转矩电流双闭环控制方式。
A new equipment for simulated the performance of propeller load is introduced in this paper, it's an all digital DC torque servo system using torque closed loop and current closed loop control.
对集群系统的基本特性和负载平衡的工作原理作了必要的概述。
In this paper, summarizes the basic property of clusters system and work principle of load balancing.
我们研究分析了由于电声耦合，电负载对压电振动系统特性的影响。
The effect of electric load on the piezoelectric vibrational system due to electroacoustic coupling was analytically investigated.
提出了以螺杆钻具钻头油井系统的综合负载特性曲线作为螺杆钻具正确选择和使用的依据。
The author proposes taking the comprehensive load curve of the screw drill-drill bit-oil well system as the basis for the proper selection and use of screw drills.
为了建立实际系统中有限元计算结果和控制性能之间的关系，电压方程和转矩公式用于负载特性分析中。
Voltage equations and a torque formula were employed in load characteristics analysis to establish the relation between FEM results and control performance in an actual system.
大惯性负载加减速过程的平稳性问题严重影响了阀控系统的动态特性。
The smoothness of acceleration and deceleration process is a serious problem in valve control system with high inertia loads.
结果表明，在一定的负载转动惯量下，控制系统具有较好的动态响应特性、准确性和稳定性。
Results show that the control system has better characteristics in a certain moment of inertia of the load such as responsibility, accuracy and stability.
结果表明，采用非线性控制规律，负载模拟系统的跟踪特性好，且系统能有效抑制强扰动所引起的多余力矩。
The result shows that load simulation system has a nice tracking characteristic by means of nonlinear control law, and the redundant moment brought by strong disturbance can be effectively restrained.
本文通过分析长距离输送系统中胶带输送机的张力特性、负载特性和机械特性，建立了其速度和加速度驱动模型并进行了优化。
Based on analysing the long-distance tape conveyor and its characteristics of tension, load and mechanic, this paper sets up its optimized speed-driven and acceleration-driven model.
针对这一问题，提出了利用可编程计算机控制器(PCC)控制磁滞测功机实现串行通信加载的方法，并设计了一新型负载特性模拟实验系统。
Aimed at this problem, a method of serial communication loading on HAD which is controlled by PCC (programmable computer controller) was proposed, and a novel experimental system was designed.
通过实验证明，该系统具有良好的启动特性和加速性能，更能适应频繁启动冲击下的电动汽车驱动负载。
The experimental results show that the system has good performances such as start characteristics and accelerating index. Therefore, it is more suitable for shocking load with high start…
运动方程及负载特性是“电力拖动系统”课程中的重要内容。
It is very important to teach contents of motion equation and load characteristics on the lecture electric Drive course for electrical-engineering major.
最后，文中详细分析了无接触电能传输系统的负载特性，进而设计出用于无接触电能传输系统的高频全桥串联谐振逆变器的拓扑结构。
In the end, by studying the load character of contactless electrical power deliver system, this paper designs the high frequency full-bridge series resonance converter.
通过分析系统的工作原理和补偿特性，得到系统的工作条件和适用的负载类型。
It also qualifies the work condition and applicable loads of APF through analyzing the compensation principle and characteristic.
即使在极端的集群负载特性中，集群动态负载平衡算法仍然能取得比较理想的性能，因此实现即使是十分简单的集群动态负载平衡系统也是很有必要的。
Even with extreme workload characters, the dynamic load balancing system can also get ideal performance, therefore implementing even a very simply dynamic load balancing system is also necessary.
该文主要对某负载敏感系统挖掘机LS管路进行优化，以实现负载敏感系统的控制特性。
This paper mainly to optimize LS line to achieve the load sensing system characteristics.
分析了Boost变换器带恒功率负载的特性，推导出系统传递函数并得到系统稳定运行条件。
The stability and dynamic properties of a multi loop-con trolled BOOST converter with constant power load are studied.
燃料电池以能量效率高、环保等优点为机器人电源提供了一种新的解决方案，但由燃料电池输出特性较软，若单独为机器人负载供电难以满足系统的动态需求。
Fuel cell is a new power supply solution for its energy efficiency and environmental protection. However, the fuel cell itself can't meet the robot system dynamic requirement.
应用推荐