这种将传感器输出转换成电压信号，并与系统的其它电路相连接的过程，称为信号调理。
This process of converting the transducer output into a voltage signal which can be connected to the rest of the system is called signal conditioning.
标定时可根据仪表显示的传感器信号电压进行系统检测。
While adjusting, it can measure the system according to the voltage of sensor signal that the instrument shows.
该系统由前端传感器、电压匹配电路、主控制器和事故后处理软件组成。
The system is composed of sensor, the circuit of voltage matching, main controller and dealing software.
整个系统由光纤电压传感器、数据采集卡及一台微机组成。
The system is made up of an optical voltage sensor, a high-speed data acquire board and a computer.
研究了光纤电压传感器光路系统中光源、光纤、电光晶体和光电探测器对测量误差的影响。
The errors caused by light source, optical fiber, electro optic crystal and opto electric detector in optical fiber voltage transducer are presented.
多功能芯片ADT14既是一种输出逻辑电平控制信号的多点温度监控器，又是一种输出模拟电压信号的温度传感器，可广泛应用于各种嵌入控制系统中。
The multi-functional chip ADT14 is a kind of multi-point temperature monitor of outputting logic level control signal, It is also a kind of temperature sensor of outputting simulated voltage signal .
系统的硬件平台主要由数据采集卡和霍尔电压电流传感器构成的信号调理器组成。
The hardware is made up of Data Acquisition card (DAQ) and signal conditioning extension for instrumentation (SCXI) which is composed of Hall voltage current sensor.
应用包括传感器放大器，直流放大块，和所有的传统运算放大器，现在可以更容易地在单电源电压系统实现电路。
Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational-amplifier circuits that now can be more easily implemented in single-supply-voltage systems.
传感器的输出为频率量和电压量，可与监测系统联接。
The output of sensor is frequency and voltage. It can be direct connect with monitoring system.
输入信号可以从信号电流或相关的传感器或测量系统电压。
Input signals can be signal currents or voltages from the associated transducers or measuring systems.
介绍了差动变压器式传感器的结构和输出特性，详细分析了其零残电压产生的原因，以及对测量系统非线性和灵敏度的影响。
The producing reason of residual voltage at zero point and its affection to the nonlinear quality and sensitivity of measurement system were analyzed extensively.
系统的硬件主要有：ZHJ-1B型电流传感器、自行研制的电阻应变式力传感器、电极间电压测量装置及NI-DAQ 6062E数据采集卡等。
The hardware of the system mainly consists of a ZHJ-1B current sensor, a self-made resistance strain force sensor , the device for measuring electrode voltage and a NI-DAQ 6062E data acquisition card.
针对感应电机无速度传感器磁场定向控制系统，提出一种基于电压模型的改进转子磁链观测方法。
An improved rotor flux estimator based on voltage model was proposed for speed sensorless field-oriented vector controlled induction motor drives.
系统采用霍尔传感器和电压传感器对电压和电流采样，转化成电压信号输给压控芯片LM 231。
The Halls sensor and voltage sensor is used for sampling current and voltage in the system, and the signals are transformed into voltage signal and sent to the LM231.
采用新型薄膜铂温度传感器设计了多点温度检测系统，使用正反馈型线性校正电路使输出电压与温度成线性关系，从而提高了检测系统的测量准确度。
The linearity correction circuit of positive feedback can make the output voltage be linear with the temperature, so the measurement accuracy of the system is improved.
针对感应电机无速度传感器磁场定向控制系统，提出一种基于电压模型的改进转子磁链观测方法。
The paper introduces the principle and the math models of asynchronous modulation system by voltage model rotor magnetic chain vector control.
所述测量系统由电压传感器、电流传感器和标准电能表构成；
The measurement system comprises a voltage sensor, a current sensor and a standard electric energy meter.
在异步电机控制基础上 ，利用扩展卡尔曼滤波器将转子转速看成系统的一个状态量 ，根据定子侧可以测量的电流、电压值 ，逐步估计出转子转速 ，为研制无速度传感器控制打下基础。
The rotor speed can be tacken as a state variable of the system by using the Extended Kalman Filter, which based on the vector control of an asynchronous motor.
在异步电机控制基础上 ，利用扩展卡尔曼滤波器将转子转速看成系统的一个状态量 ，根据定子侧可以测量的电流、电压值 ，逐步估计出转子转速 ，为研制无速度传感器控制打下基础。
The rotor speed can be tacken as a state variable of the system by using the Extended Kalman Filter, which based on the vector control of an asynchronous motor.
应用推荐