介绍了马钢第三炼钢厂转炉煤气回收OG系统的设备结构，阐述了OG系统控制功能。
This paper introduces the structure of Gas Recovery OG System of BOF in the third steel-making plant, Ma Steel Ltd. , also describes the control function of the system.
操作系统控制着电脑最重要的一些功能。
在分析系统控制方案的基础上，阐述了系统的硬件和软件设计方法，以及系统实现的功能和效益。
Bases on analyzing the control schemes of system, the design methods of software and hardware, as well as the function and benefit accomplished by the system are described.
采用现场可编程门阵列（FPGA）完成测试图案数据存储、各种视频标准时序产生及系统控制信号产生等核心功能。
The kernel functions such as test signal storage, video timing signal generation and systems control signal generation are realized by field programmable gate array(FPGA).
该系统控制精度高，稳定性好，保护功能强，适合于现场及实验室应用。
This system possesses high control precision, good stability, strong protection function and is suitable for using in lab and on site.
本文介绍了它的构型、软硬件及系统控制逻辑等功能。
This paper introduces its configuration both on hardware and software system control logic, data flow and functions.
本文首先简单介绍了VOD视频点播的原理，然后给出了一种具体的服务器的设计方案，其中详细分析了系统控制、信令功能及播放控制部分。
This paper first briefly introduces VOD's principle and application, then presents a design of VOD server software, and particularly analyzes the system control, signaling and play control.
该系统采用了MCS - 51单片机实施系统控制与管理、电压连续调整、通讯程控等功能，因而精度高、自动化功能强、使用方便。
By use of MCS-51 chip microprocessor, it can fulfill the tasks, such system control and management, programmable control communication and continuous regulation of voltage with high accuracy.
采用以微处理器为中心的系统控制可实现CD光驱的诸多功能。
Many functions of CD unit can be implemented with the system control, which its central processor is MPU.
本文简单介绍了系统控制中心端监测数据统计应用部分的功能设计和实现方法。
This article introduced the applied design and realization of monitor data in system control center.
本文介绍了色谱柱切换系统控制软件的主要功能以及软件系统的设计。
The designing of chromatographic columns switch system control software and the main functions of this software are introduced in this paper.
介绍攀钢方坯RH精炼装置真空系统基本控制功能，侧重介绍真空泵系统的功能和其相关系统控制。
The basic control functions of RH vacuum installation for bloom CCM in PANGANG Iron & Steel Group Co. are presented, emphasizing the vacuum pump control system.
领导之所以可以称之为科学，就在于它可以用系统控制理论和数学方法描绘、再现其功能形成过程；
The science of leading is a science that can describe and reappear the effect of the leader through system cybernetics and mathematics.
本文对功能进行分析后，提出了系统控制方案，分析并实现了控制部分，并且设计了系统的外形结构。
After the function is analyzed, the system control scheme is put forward. The control part was analyzed and realized. And the outline structure of the system is designed.
本文简单介绍了系统控制中心端监测数据统计应用部分的功能设计和实现方法。
In this paper, introduced the applied design and realization of monitor data in system control centre.
结果：改造升降系统控制电路，在未降低原有功能和性能的情况下使之恢复到正常状态。
Results The normal working status restored without compromising its original functions and features after redesign.
全伺服系统控制，全部自主编程，所有控制由软件实现，方便功能调整和技术升级，永远先进。
Full servo control system, all independent programming, all controlled by the software to facilitate the function of restructuring and technological upgrading, advanced.
该系统控制算法采用PID算法，且根据现场工艺要求实现了从手动到自动的无扰切换功能。
PID algorithm is adopted in the system, and the function of non-disturbance shifting from manual mode to automatic mode is realized according to field process requirement.
本文针对此问题分析研究了一种一键式起动系统控制的方案，该方案不需对起动机的控制进行安全监控，同时能有效解决低电压起动困难问题，在不改动低端EMS平台的硬件的前提下，实现一键式起动功能。
The current ECU based on low-end EMS platform can not realize the one-button start function on economy car as it is lack of the related monitoring controller and the starter driving circuit.
本文介绍了基于船舶消磁系统控制要求的人机界面设计与开发，同时介绍了MP370多功能人机界面开发平台的特点，以及它与PLC之间的通讯组态。
This article describes the design of HMI application in the ship demagnetization system. the character of MP370 and the configuration of communication with PLC are introduced in the paper.
数据的采集、计算和这些技术中的其他功能可以由诸如dsl优化器之类的系统控制器来完成。
The collection of data, calculations and other functions performed in these techniques may be performed by a system controller, such as a DSL optimizer.
针对某系统控制台的功能要求，讨论了人机界面的设计过程。
The design process of the software interface on a console is discussed by, considering the requirement of the function.
完成了系统控制软件和FPGA控制逻辑设计，实现了幅频和相频测试，参数存储，Q值计算等数据处理功能。
It completes the system control software and FPGA control logic design, and achieves the data-processing function of amplitude and phase-frequency testing, parameter storage, calculation of Q-value.
采用数字式交流伺服控制系统控制动横梁速度，使系统额速度稳定性、调节范围、自动化程度和测量精度都有大幅的提高，且具有一定的自诊断功能。
Digital AC-Servo control system is used to increase speed stability, adjust-ranges, automatization, measurement-precision, at the same time the system has some self-diagnose functions.
第四章研制了计算机高速数控雕铣系统控制软件，包括控制软件结构、主要管理功能、刀具补偿功能、插补功能的分析和实现。
System software is designed and programmed in chapter 4, including the analyses and researches on software structure, module of vital manage, module of tool compensation and module of interpolation.
第四章研制了计算机高速数控雕铣系统控制软件，包括控制软件结构、主要管理功能、刀具补偿功能、插补功能的分析和实现。
System software is designed and programmed in chapter 4, including the analyses and researches on software structure, module of vital manage, module of tool compensation and module of interpolation.
应用推荐