在本文中，全面论述了强实时双系统容错技术中的关键问题，包括系统结构定义、故障检测、状态切换。
A full discussion of the key problems in hard real time dual system is presented, including the definition of system architecture, fault detection and state transition.
本文介绍了容错重算恢复技术中的向后滚动检查点算法。并针对减少系统开销的问题，提出了在虚拟存贮器中的一种实现方案。
This paper introduce the rollback checkpointing algorithm in the retry-recovery technique. In order to reduce the system overhead, it presents a scheme implementing in the virtual memory.
多余度计算机通道间的同步，是容错计算机系统的技术难点。
The Synchronization of the redundance computers is a critical technique for the fault tolerance computer system.
说明利用RAID技术能提高磁盘存取速度、提高系统的容错能力。
Note the use of RAID technology can improve disk access speed, system fault tolerance.
本文研究了大词汇量非特定人汉语连续语音识别和理解系统中的容错技术。
In this paper, error tolerant techniques are studied for large vocabulary speaker independent Chinese continuous speech recognition and understanding systems.
实验表明：软件测试和软件容错技术相结合，可以进一步提高软件系统的可靠性。
Experimental results show that software system reliability thus can be remarkably enhanced by combining the software testing approach with software fault tolerance technologies.
故障诊断与容错控制技术是提高动态系统的安全性、可靠性的重要途径之一。
Fault diagnosis and tolerant control technology is an important approach to improve the safety and reliability for dynamic systems.
文章介绍了SPEEDTRONIC MARKV (TMR)的硬件、软件及主要功能，并分析了该系统的接口，硬件三冗余及软件容错技术。
This paper introduces the hardware, software and main function of SPEEDTRONIC MARK V, and analyses the interface of this system, TMR and SIFT technology.
IBM的此项技术首创是要在存储系统的方方面面：磁盘、控制器、网卡、电源和软件，实现容错。
IBM's technology initiative deals with fault tolerance in every part of a storage system: disk, controller, network CARDS, power supplies and software.
采用冗余容错技术可以提高系统的可靠性。
And using techniques of redundancy fault-tolerance can improve reliability.
本文就其存贮系统的结构、容错技术及支持电路这三部分予以说明和论述，仅供同行参考。
The memory system configuration, fault-tolerant technique and support circuit of the imported ATC simulated system have their unique adv…
本文首先介绍了消息传递系统中软件容错的概况及国内外检查点回卷恢复技术的现状。
Firstly this paper briefly introduces fault-tolerant in message passing system and reviews checkpoint and rollback-recovery technology at present.
本文介绍我们研制的一个多机容错系统MPFTS的故障恢复技术。
The technique of the fault recovery of a multi-processor fault tolerant system MPFTS designed by us is presented in this paper.
电动助力转向(eps)系统的传感器故障将严重危害汽车的可靠性与安全性，研究EPS系统的容错控制技术具有重要的应用价值。
The sensor failure of electric power-steering (EPS) system damages vehicle reliability and safety seriously. The research of fault-tolerance control technology of EPS has important application value.
而容错技术在允许系统内部发生故障的情况下，通过信息冗余方式，保证系统仍能可靠运行。
When network failures happen, the fault-tolerant technology can guaranteed the network system still could reliably move through redundant Information.
在设计控制系统中，采用了硬件冗余和软件容错技术，使得整个系统的可靠性大大增强。
In designing the control system, the hardware redundance and the software tolerance technology are adopted. It greatly enhances the reliability of the control system.
详细阐述了该系统设计与开发的目标、系统结构、业务流程、关键技术和容错处理。
The object of design and development of this system, system's structure, system's procedure, key technologies, mechanism in mistake are emphasized.
在关键的场合，要求使用容错软件技术(包括非相似设计技术和恢复块技术)实现高可靠计算机系统。
Fault Tolerant software techniques such as Nversion programming (NVP) and Recovery Block (RB) are introduced into the ultrahigh reliable critical computer system.
本文提出软件容错技术和硬件冗余技术相结合，大大提高了控制系统的可靠性和安全性。
In industry control system, it can greatly improves the reliability and safety of the system when using the software tolerance and hardware techniques together.
另外，在该系统的设计中充分进行了可靠性设计，引入了容错技术、故障诊断技术并进行了故障自动恢复的设计。
In the design, reliability design is considered fully, and fault-tolerant technique, malfunction diagnoses technique and system auto-resume design is brought in.
所讨论的动态系统的容错技术包括故障检测、故障定位和系统重构技术。
Fault tolerant technology for dynamic systems includes fault detection, fault isolation (FDI), and system reconfiguration.
提高计算机网络系统可靠性主要有两大类技术：避错技术和容错技术。
Two big kinds of technologies, evading technology and fault-tolerant technology, are to enhance the reliability of computer network system.
容错技术广泛应用于各个行业来保证系统的冗余和可靠性。
Duplex redundancy technology is wildly applied in various industries to guarantee the robustness of the system.
模块式结构是一种容错系统，小型化模块使得储备冗余技术得以实现，大大提高了系统寿命。
The modular construction design results in a kind of fault-tolerant system. The small-scale modules make system redundancy technology available, which improves system life greatly.
提出一种数字传输系统中帧同步码的检测方案，利用容错技术和非容错技术相结合来实现帧同步码检测。
We combine the error-tolerant technology with no error-tolerant technology to carry out the detection of the frame synchronization code.
具有容错能力的双元数据服务器采用双系统备份、镜像复制存储技术，从而保证了元数据管理的高可靠。
DMDS adopts pair of system back-up and mirror-back-up memory technology. So the system has high reliability of metadata management.
由于分布式程序的广泛应用，分布式系统的容错问题就变得越来越重要，许多技术被用来提高系统的稳定性和可靠性，其中包括回卷恢复技术。
Fault tolerance of these systems is mainly focused and many techniques have been developed to improve reliability and high availability of distributed systems. Rollback recovery is one of them.
因此，信息系统的容错、容灾技术已经越来越成为从业人员研究关注的焦点。
Therefore, the mistake and disaster tolerance technology has become the focus of research interest.
这也使得我们可以结合ICS的高实用性、容错系统技术到Logix架构，把这项技术扩充到离散和混合过程应用中。
It also allows us to incorporate ICS 'high availability, fault-tolerant technology into the Logix architecture extending the reach of this technology into discrete and hybrid process applications.
本系统采用了冗余技术和容错措施：系统中的通信过程采用了自适应协议和CRC差错检验；
The system adopts redundancy technique and error proof measure: communicating process uses a self-adapting protocol and CRC;
应用推荐