已知某系统传递函数G，可以调用改代码对系统进行降阶处理。
Known transfer function of a system G, can call the code to deal with reduced-order system.
分析表明倒频谱在识别边频及测试系统传递函数的影响方面具有显著的特点。
The analysis indicates that the inverse spectrum has a noticeable feature to distinguish the influence of the side frequency and identify the transfer function of the testing system.
分析表明倒频谱在识别边频及测试系统传递函数的影响方面具有显著的特点。
The analysis indicates that the inverse spectrum has a noticeable feature to distinguish the influence of the side frequency as well as the transfer function in measuring test system.
本文提出了一种异步电动机电流型变频调速系统传递函数的分析及工程设计方法。
This paper presents the methods of transfer function analysis and engineering design for variable frequency adjustable speed system of induction motor supplied by current source inverter.
系统传递函数的伯德图可以用于确定各种输入(包括阶跃输入)下系统的稳态响应。
Bode plots of the system transfer function are used to determine the effects of various inputs (including a step) upon the steady-stat response of the system.
在此基础上，利用系统辩识获得的系统传递函数的系统，设计了一种自整定pid控制方法。
The means of auto tuning PID with the system parameters identification on line is obtained, and a kind of controlling method of auto tuning PID is designed.
分析了Boost变换器带恒功率负载的特性，推导出系统传递函数并得到系统稳定运行条件。
The stability and dynamic properties of a multi loop-con trolled BOOST converter with constant power load are studied.
本文根据自控原理中传递函数的概念，建立盒式录音机机芯走带系统的数学模型——系统传递函数框图。
In this paper, the concept of transfer function in control engineering is applied to produce a mathematical model for the play system of cassette recorder mechanism—block diagram of transfer function.
本文主要讨论了用系统传递函数和状态变量探讨lti边界系统稳定的异同，还简要说明了造成这种差别的数学原因。
The differences between transform function and state variables to depict the stability of LTI system are discussed in the paper. In addition, the paper mentions the differences in math.
在本课题研究中，主要研究工作包括：1、建立汽车1/4悬架系统的数学模型，并计算得输入为测试台位移，输出为车轮对测试台压力的系统传递函数。
The main work for research:1. Establish 1/4 automobile suspension mathematical model, get a transfer function of wheel to the testing pressure when the inputs is a testing displacement.
为了提高系统的稳定性，抑制滤波器的谐振，在双闭环控制的基础上提出了一种基于虚拟电阻思想的控制策略。通过对滤波电容电流的积分处理，改变了系统传递函数的极点，确保了系统的稳定运行。
To suppress resonance of LCL filter and improve stability of system, it is pre - sent that a voltage and current double loops control strategy based on virtual resistor concept.
以ewb电路分析方法中的极零点为分析工具，分析复杂电路或系统的传递函数，来达到取代枯燥繁琐的手工计算的目的。
By using the Pole-Zero as the analytical means in EWB circuit analysis, the transfer function was analysed in complicated circuit or system to replace the dull and onerous manual computation.
它是SISO双线性系统非线性传递函数计算公式的推广。
They are the generalization of the computation formula of nonlinear transfer function for SISO bilinear system.
本方法以实际系统的输入输出信号为依据，实现系统建模，用被控对象传递函数的逆作为串联控制器来对系统的动态特性进行控制。
Using the input and output signal, the method can model the system, and can control the dynamical property of the system with the inverse transfer function of the controlled object as the controller.
通过建立球杆系统机械部分模型、角度模型和电机模型，简化后得到了整个球杆系统的传递函数。
By modeling the mechanical part, Angle and motor of the ball-beam system, the simplified transfer function of the ball-beam system is obtained.
对光学系统输出刀口像的一阶导数做傅里叶变换，可以得到该系统的光学传递函数（OTF）。
The OTF (Optical Transfer Function) of an optical system can be evaluated by the Fourier Transform of the first derivative of the optical image of an knife-edge (object).
然后，利用多维拉普拉斯变换，推导出双线性系统非线性传递函数矩阵的计算公式。
Then by using multi-dimension Laplace transform, the computation formula of nonlinear transfer function matrices for MIMO bilinear system are deduced.
本文基于等效力控制系统的传递函数和数值模拟，主要研究了实时子结构试验等效力控制方法中的零点问题。
Based on the transfer function of equivalent force control system and the numerical simulation, this paper primarily studies the zeros problem which appears in RST with EFCM.
依据图像恢复技术的要求，高精度成像系统调制传递函数(MTF)是高质量图像恢复的基本条件。
According to the requirement of image restoration technique, high precision modulate transfer function (MTF) of imaging system is the base of high-quality imagery restored.
测试平台系统的传递函数通过机理建模的方法建立，通过理论分析与实验相结合获得各项参数。
The transfer function of the measuring platform system is set up by using mechanism modeling method, and the parameter is got by both academic analysis and experiment.
继而导出整个系统的传递函数。
本文的目的是使梯形网络系统的电压传递函数公式化。
The aim of the article is to formulate the voltage transfer function of the ladder network system.
从光线矩阵元表达的衍射积分出发，导出了复杂光学系统的光学传递函数。
Starting from the diffraction integration in terms of ray matrix elements, the optical transfer functions have been derived for complicated optical system.
再根据系统的传递函数矩阵，采用PID对角矩阵解耦控制算法结合约束条件实现其解耦控制。
Then the PID diagonal matrix decoupling control algorithm was adopted in the system based on the matrix transfer function.
本文重点论述了航摄系统调制传递函数的原理，测定方法和实际应用。
This paper offers a general account of the principle, measurement method and practical application of modulation transfer function in aerial photographic system.
计算了一个非球面非共轴无焦系统的波动光学传递函数。
The Optical Transfer Function of an afocal aspherical and non-coaxial optical system is also calculated.
本文给出了一维复杂非均匀分布参数系统的数值传递函数方法。
A numerical distributed Transfer Function Method (DTFM) is developed for analysis of complex one dimensional non uniform distributed parameter systems.
半径影响系统的传递函数特性；
The ring radius influences the system transform function characteristic.
半径影响系统的传递函数特性；
The ring radius influences the system transform function characteristic.
应用推荐