本文阐述了一个基于动态数学模型及启发式优化策略的连续加热炉计算机控制系统的设计与实施。
The design and implementation of reheating furnace computer control system based on the dynamic mathematical model and the heuristic optimization strategy is discussed in this paper.
本文将序列模型逼近法推广到稳态大系统的递阶优化与控制中去。
This paper extends the sequence model approximation (SMA) approach to hierachical control of large-scale steady state systems.
对空调系统进行冷负荷预测是对冰蓄冷系统进行优化控制的重要前提与基础。
Predicting the cooling load of air-conditioning system is the precondition and foundation of optimizing control of an ice storage system.
炼钢区段的优化与控制是钢铁制造过程系统调控的关键。
Optimization and control of steelmaking is the key point of steel manufacturing process system control.
本文研究了出现在系统与控制理论中的一些标准的、包含线性矩阵不等式的凸优化问题。
This paper discusses problems arising in system and control theory to a few standard convex optimization problems involving linear matrix inequality (LMI).
本文介绍江西峡江水边粮油加工微机配料过程控制与优化配方系统。
This paper gives an introduction to the system for ingredient-mixing process control and recipe optimization.
结合计算机仿真,可以实现系统的性能预测、控制优化、状态监测与故障诊断。
Combined with computer simulation, this method can be applied to steam turbine performance prediction, optimizing control as well as condition monitoring and fault diagnosis.
系统与控制理论中的许多问题,都可转化为线性矩阵不等式约束的凸优化问题,从而简化其求解过程。
Many important problems of system and control theory can be reformulated as linear matrix inequality convex optimization problems, which is numerically tractable.
发动机性能优化、排放控制及电控系统的开发与研究成为业界研究热点。
The development and research of the engine performance optimization, the emission control and the electronic control system is becoming a hot spot.
在本校课程教学改革中,提出了将这三门课程的教学内容进行整合与优化,三门课整合为一门“电路、信号和控制系统”课程。
So it is necessary to reorganize and optimize the teaching content and a new course of "Circuit Signals and Control Systems" have been put forward in the courses reform.
所建立的轧制模型可用于环轧控制系统的设计与轧制规程的优化,对环件轧制预测和实际生产有重要的指导意义。
The proposed mathematical model can be used to design the control system and optimize the rolling strategy, and it has great significance to the rolling prediction and ring production.
指出综合考虑能更有效地对反应器生态系统进行设计、控制与优化。
This will be more effective for the design, control and optimization of biochemical processes in reactor ecosystem.
本文还对该系统建立了相应的控制策略,根据具体情况选择最合适的工作模式,并优化与发动机相关工作模式的性能,提高整车运行的燃油效率,减少尾气排放。
The vehicle control strategy is established to choose the most appropriate operation mode and optimize the overall vehicle operation involving the engine in terms of fuel economy and emission levels.
炼钢区段的优化与控制是钢铁制造过程系统运行控制的关键。
Optimization and control in steelmaking zone is the key point of operation control in steel manufacturing process system.
我们有几个不同的评价系统的控制与优化的新的TMP线。
We have evaluated several different systems for control and optimization of our new TMP line.
该系统将工艺控制与物流管制相结合,为炼铁生产的系统优化提供决策支持。
The system has combined process control with logistics management, and given the decision support for the system optimization of ironmaking production.
控制与工艺集成优化设计是一种系统化的过程优化设计方法。
Simultaneous design and control optimization is a systemic process design method of optimization.
本项研究有利于促进和深化建模与模型管理的类人化、智能化研究,在动态系统的实时优化控制领域具有较广阔的应用前景。
Modeling and model management have been further studied with anthropoid and intellectualization, and will be used widely in real time optimal control of dynamic system.
文章从锅炉给水系统、燃烧系统及过热蒸汽系统三个方面,阐述了锅炉控制的关键与优化措施。
This article, from the three respects of feed-water system, burning system and overheated steam system, has exposed the key to boiler control and some optimization measures.
在分析注水系统节能优化与注水站单站节能优化关系的基础上,提出了将注水系统优化控制简化为单站局部优化控制的构想。
Analyze the relation of the water flooding system and the water flooding station; present a design of simplifying the water flooding system control to water flooding equipment control.
最后,对锅炉燃烧控制系统进行了试验,对实际运行曲线和数据进行了分析,结果表明,本论文的控制方法与优化方案是可行的和有效的。
In the end, the optimum combustion control plan and system have been tested in the site, and the operation parameter curves and tested data of burning control system are analyzed.
提出一种DCS控制系统设计的整体化构想,并就局部子系统优化与协调控制的工程方法加以介绍。
A integrated idea of the DCS design, and some engineering methods of partial subsystem optimization and coordination control are presented.
进行卫星姿态控制系统故障模拟,对控制系统优化配置、故障诊断、系统重构技术研究与实验验证具有重要作用。
The fault simulation of satellite attitude control system is crucial for research and experimental verification on optimizing configuration, fault diagnosis, reconstruction of control system.
通过对加压气化炉煤锁dCS自动加煤系统的开发与应用,来实现PK M气化炉加煤的自动和优化控制,以确保气化炉稳定运行。
Based on PKM gasifier coal lock hopper auto feed coal DCS system program's development and application, PKM gasifier can auto feed coal and produce gas safely and steady.
非线性极大极小系统的全局优化可用于柔性制造和智能交通的决策与控制。
Global optimization of nonlinear max-min systems can be used for decision and control of the flexible manufacturing systems and intelligent transport systems.
本文主要论述了不定期票在各航班的优化控制方法,此方法建立在民航业经典的舱位控制理论之上,可以很好地与现有收益管理系统相结合。
In this article an optimal method is set up. The method is built on classic seat inventory control theory, so it can combined with revenue management system presently.
并在此基础上,从洁净风量与空调风量分离、减小系统送风量、新风量、优化控制及运行管理等多方面多角度,提出了具体节能的思路、方法和措施。
Based on the above, some measures were put forward in many aspects such as the reduction of air volume flow and the fresh air, optimization control, operation management and so on.
论文重点突出物料传送系统关键部件——承载梁的优化设计及控制系统稳定性与可靠性的设计。
Optimum design of loaded beam which is key part of carrying system, design of stability and reliability control system are emphasized.
提出一种模糊控制与PID控制相结合的优化算法,实现了对高频加热设备温度系统的良好控制。
An optimized algorithm combining the fuzzy control with the PID control has been put forward, realizing a good control of the temperature system in the high frequency heating equipment.
从城市路网的优化改造、城市道路的合理定向和城市交通信号灯智能控制三个层面,系统的分析和讨论城市交通的优化改造与智能管理;
By three levels of the optimal modification in the traffic network, reasonable orientation of the roads and the intelligent management, we discuss and analyze the traffic problem in a system view.
应用推荐