将系统仿真技术应用于制冷空调系统就形成了制冷空调领域一个重要的分支——制冷空调系统仿真技术。
A branch of the refrigeration field comes into being after system simulation is applied in the refrigeration system — the refrigeration system simulation.
将虚拟现实技术与系统仿真技术相结合，建立了炼油企业虚拟现实过程模拟仿真平台，分析了仿真平台的结构设计与实现原理。
With the combination between system simulation and virtual reality, we establish an integrated virtual refinery simulation platform, and analyze the overall design and principle architecture.
[6]武鹏飞，颜凌云。 浅析液压系统仿真技术现状及发展趋势[J]。机床与液压， 2011， （8）： 133-134。
WU Pengfei, YAN Lingyun. Status and Development Trend of Hydraulic System Simulation Technology[J]. Machine Tool & Hydraulic , 2011, (8): 133-134.
本文探讨“计算机控制系统”低成本实验装置的设计、制作及其在研究型实验中的应用，即物理仿真技术的应用。
This paper discussed the design of low cost experimental installations and their applications in the experiments on the study of computer control systems by physical simulation.
论述了将计算机仿真技术应用于翻车机控制系统开发的可行性，并给出具体仿真方案及编程框图。
The feasibility of applying this technique in the development of the control system of tippers is demonstrated with the concrete emulation scheme and a programming flowchart.
介绍了北京钢铁研究总院采用计算机仿真技术与计算机辅助设计技术，开发出具有优化功能的钢管冷拔过程CAD系统通用软件。
The paper introduces CAD system of steel tube cold drawing process which is a software with optimum function developed by Iron & steel General Institute on basis of computer imitation technology.
将该算法用于机场地面容量评估模型中的飞机流产生模块，结合计算机图形仿真技术开发了机场地面容量评估系统。
Adopting the algorithm as a module to generate optimized traffic flow and combining with the computer geographic simulation technology, an airport ground capacity evaluation system was developed.
建模仿真技术是C4ISR体系结构研究、C4ISR系统分析与设计所采用的重要且有效的方法之一。
Modeling and simulation technology is one of the most important and most valid methods to support the researches of C4ISR architecture and C4ISR systems analysis and design.
应用硬件在环实时仿真技术进行了柴油机电控系统动态特性匹配的研究。
The hardware in the loop real time simulation technique is applied to study on the optimization of dynamic characteristics of electronic control system of diesel engines.
本文利用数值仿真技术对复合场中电子成像系统的像差理论做了研究。
In this paper, the aberration theory of electron image forming systems in the combined focusing and deflecting field has been researched using the technology of numerical simulation.
本文针对制造系统布局问题研究了制造单元设备布局方法和布局方案的可视化及运行仿真技术。
The researches in this thesis are facility layout, visualization and process simulation of manufacturing Cell according to the layout problem of manufacturing system.
提出基于虚拟现实技术、虚拟样机技术和过程仿真技术的大型复杂装备虚拟维修训练系统设计方法。
A method of constructing certain missile virtual maintenance training system was proposed based on virtual reality technology, virtual prototype technology and process simulation technology.
并根据热力学理论、流体力学等理论，运用仿真技术对冷藏集装箱制冷系统主要部件和冷藏集装箱冷藏室内的流场温度场建立数学模型和进行模拟仿真。
Then. based on the theory of thermodynamics and the theory of hydrodynamics, applying simulation technique to theorize mathematics model of the key component of refrigerated containers .
该模型利用多智能体系统解决了自主性和整体涌现性问题，利用仿真技术解决了随机性问题。
In the proposed model, MAS was employed to solve the problem of presenting autonomy and whole emergence, and the technique of simulation was employed to present randomicity.
文章讨论了基于SI仿真技术的高速电路设计流程，并结合高性能DSP并行系统设计实例进行展开说明。
The paper presents a high-speed circuit design flow based on SI simulation, and illustrates this design flow using a design instance of high performance DSP parallel system.
多进程、共享内存等计算机应用及仿真技术的综合运用有效提高了系统高效性和实时能力。
Some computer technologies and simulation technologies, such as multi-thread, Shared EMS memory and so on, are employed synthetically to improve the efficiency and real-time quality effectively.
最后介绍了一个支持先进分布仿真技术和虚拟样机技术的分布式协同虚拟环境原型系统——AST_DCVE。
A typical DCVE prototype system named AST_DCVE, which can support the research of advanced distributed simulation technology and virtual prototype, is introduced.
分析比较了当前研究织物风格的几种重要方法：基于神经网络的织物风格识别系统、灰度关联分析法和物理仿真技术等。
The current methods for fabric handling research were introduced, such as identification systems based on artificial neural networks, the grey relational analysis and physical emulation and so on.
最后，本文把联合仿真技术引入并联机器人的精度分析领域，结合控制系统，在仿真环境下对并联机器人运行精度进行分析，并提出了改进措施。
At the end of this paper, co-simulation method was introduced to the area of parallel robot accuracy analysis, and come up with ways to improve the running accuracy of parallel robot.
本文简要介绍了再入体六自由度控制系统半实物仿真的系统结构与软件系统设计，并探讨了相应的仿真技术途径。
In this paper, system structure and software design of reentry vehicle Sir -dof semi physical simulation are introduced briefly, and corresponding simulation technical methods is discussed.
随着现代航空火控技术的飞速发展，新型综合火控系统的研制与开发迫切需要先进仿真技术的强有力支持。
With the development of modern aviation fire control technology, advanced simulation technology is urgently needed in the design of new integrated fire control system.
并行仿真技术广泛应用于复杂系统仿真以及实时仿真中，回退是影响乐观并行仿真性能的关键因素。
Parallel simulation technology is broadly used in complex system simulations and real-time simulations, and rollback is a key factor to the performance of optimistic parallel simulation.
借助于计算机仿真技术，建立锅炉汽水系统的动态数学模型，进行仿真研究分析，对掌握汽水系统的动态特性起着非常重要的作用。
It is critical effect to grip the dynamic characteristic of water-steam system of boiler which establishes the dynamic mathematical model and do research analysis on simulation.
本课题针对仓储物流系统的规划设计所存在的问题，利用三维仿真技术，开发一种简单，有效的仓储物流仿真系统。
In this paper, summary to the question that the layout design of the Storage Logistics System, we develop one simple, effective Simulation System with three-dimensional technology.
作战系统是一种典型的复杂巨系统，目前其相应的仿真技术还远远不能满足它的军事需求。
Warfare system is a typical large scale complex system, and the simulation technologies for it are now far insufficient to meet the immense and pressing military requirements.
作为仿真技术与网络技术相结合的产物，分布式仿真技术己经成为目前实现大型复杂系统仿真的主要技术途径之一。
Based on system simulation and computer network technologies, distributed simulation technology is developing into one of the main approaches to simulating a large-scale complicated system.
在汽车控制系统开发中，采用硬件在环仿真技术可以对控制系统软硬件进行测试。
The hardware - in - the - loop simulation technics may be adopted in development of automobile control system to test the software and hardware of the control system.
本论文在复杂适应系统理论的框架下运用多主体仿真技术研究现实经济问题，其意义在于：首先，本课题是对经济学研究方法的一种探索。
In this paper, the significance of research on some practical economic problems with Multi-Agent simulation based on the complex adaptive system theory is presented.
并通过编写基于MATLAB的S函数，运用动画仿真技术对三容水箱系统的运行过程进行了更为直观、逼真的模拟。
Further, the three-tank water level control system is simulated in the cartoon display with s function in MATLAB, which is more intuitionistic and realistic.
并通过编写基于MATLAB的S函数，运用动画仿真技术对三容水箱系统的运行过程进行了更为直观、逼真的模拟。
Further, the three-tank water level control system is simulated in the cartoon display with s function in MATLAB, which is more intuitionistic and realistic.
应用推荐