系统主站软件可靠性设计是系统设计的关键技术。
The reliability design of the master station software is the key technology to implement system.
电力远程监测系统主站软件可靠性设计是系统设计的关键技术。
The reliability design of the master station software is the key technology to implement electric power remote monitoring and management system.
最后对采用该技术的远动系统主站的结构和系统的安全性问题进行了分析。
Finally, analyzed the structure of the main station and the system's security.
主要论述了系统主站和从站的结构和通讯原理以及数据库管理系统的功能模块。
Primarily describes the structure and communication principle of the systems master station and follow station, and the Data Base Managements fuction module.
文章提出了构建新一代电能量计量系统主站所需要的平台，并对平台的选择和搭建进行了描述。
This paper puts forward the platform needed by establishing the main station of new generation of electric energy measurement system, and describes the option of the platform and its establishment.
该方案又把一主备用站地址库集成进系统之中，从而扩大了该设备的使用范围。
And also, this system design integrates the address storeroom of the main backup station into the whole system, thus enlarging the usable range of the equipment.
针对广东电网负荷特性动态监测项目的开展，该项目研制了PMU功角测量装置并开发了广域测量主站系统。
According to the project of load characteristic dynamic monitoring in Guangdong Grid, the PMU equipment and the main station system are developed.
主站管理各个子站，同时将数据导入PI系统。
The master station manages all slave stations and passes IED data into PI system.
研制开发的抽油机井无线数据采集与监控系统，是由一个设在控制室内的中心主站、若干分站及设在抽油机井变压器旁的子站组成。
The system are composed of center main station, many branch stations installed in control room and many substations fixed beside transformer of pumping well.
随着光线投照入建筑内部，主入口将乘客引导至低层出入境管制区，直至自动捷运系统换乘站。
While drawing light down into the heart of the building, the primary portal guides passengers down to the lower immigration floor and onwards to the APM Interchange Station.
汉唐证券通达信网上交易系统新版5.56，增加网通服务器，支持主站自动测速。
Han and Tang Dynasties letter access on-line securities trading system a new version 5.56, an increase Netcom servers, support for the main station automatic gun.
该系统由主站系统、变电站电压无功实时控制子系统(VQC)和通信子系统构成。
This system consists of main station system, voltage reactive real-time control subsystem (VQC) and communication subsystem.
系统由主站系统、变电站电压无功实时控制子系统（VQC）和通信子系统构成。
This system consists of main station system, voltage and reactive-power real-time control subsystem(VQC)and communication subsystem.
针对系统规模大、现场设备多、运行方式变化复杂的特点，将部分功能下移到远动终端装置（RTU）、馈线终端装置（FTU），从而减轻主站的负担。
For large system with more devices and operation patterns, part of the functions is implemented in RTU(Remote Terminal Unit) and FTU(Feeder Terminal Unit) to mitigate the load of main station.
第二部分介绍了系统硬件设计，包括主站射频模块和测站射频模块电路的设计。
The second part of the paper introduces the hardware design of the system, including the circuit design of host station RF module and measurement station RF module.
传统的关系型数据库不能满足象电力调度主站系统这样的时间关键型应用的要求。
The traditional relational database management system can't fulfill the need of times-critical applications, such as the master station of electrical dispatch system.
该系统实现了电力系统多功能电表的数据与远距离主站间通过以太网的透明传输。
The system realizes the transparent data transmission between multifunctional ammeter and remote master station via Ethernet.
采用PROFIBUS - DP单主站的网络配置模式实现了柔性加工系统的控制系统设计。
The control system of flexible manufacturing system is designed as a single master station mode of PROFIBUS-DP in this paper.
本文主要研究了电网故障信息主站系统与外部系统在数据共享和互操作功能方面的问题。
The problem of the mutual operation of Power Network Fault Information Master System and the outer system is studied.
该系统将自动化主站系统的技术引入变电站，构建了变电站自动化系统。
In this system the technology of automatic master station is used for the substation and on this basis a substation automation system is constructed.
系统采用单主站方式，在自由口模式下控制串口。
The system adopts single main-station to control the serial ports under free port mode.
电网继电保护及故障信息管理系统由主站系统、通信网络和子站系统三部分组成。
The protective relaying and fault recorder information processing system is composed of a master station system, communication network and slave station system.
本系统采用主从式结构，主站微控制器以S3C 2410微处理器为核心，从站微控制器以at89s52单片机为核心。
The system used the master-slave structure, the master microcontroller based on S3C2410 microprocessor core, the slave used to AT89S52 microcontroller core.
阐述了双机热备技术在电力自动化系统中应用的重要性，探讨了电力自动化主站系统中双机热备技术的应用条件和应用模式。
This paper expounds the significance of bi-plane heating preparation in the electricity automation, probes into the condition and style of the application of bi-plane heating preparation technology.
调度自动化系统主要由主站系统和子站系统两部分组成。
The electric power dispatching automation system is composed of master station and slave stations.
最后针对某典型工程应用系统—基于PROFIBUS现场总线和PLC的VD精炼炉分散控制系统，考虑了主站plc的延迟，分析了其PROFIBUS现场总线的实时性能。
Finally, for the typical project of VD refining furnace which is based on PROFIBUS and PLC, with consideration of PLC scanning time delay, the real-time performance of PROFIBUS is analyzed.
对现有电表、传输途径、 主站系统进行设计改造实现远距离简易变电所电量采集。
The remote simple substation realized electric quantity collection through designing and rebuilding the existing wattmeter, transmission approach and key station.
利用VC++和组态软件设计出了煤矿通风自动化系统的主站和分站软件。
The software of master station and tributary station are designed by VC ++ and configuration soft.
然后介绍了主站模块及从站模块硬件电路设计，及系统的软件设计，包括主站模块的软件设计和从站模块的软件设计。
Then introduced hardware circuit design of the master module and slave module, and system software design, included the master and slave software design.
然后介绍了主站模块及从站模块硬件电路设计，及系统的软件设计，包括主站模块的软件设计和从站模块的软件设计。
Then introduced hardware circuit design of the master module and slave module, and system software design, included the master and slave software design.
应用推荐