铁谱技术是以磨损磨粒分析为基础的故障诊断方法。
The ferrography is a fault diagnosis method based on the analysis of wear particle.
铁谱技术是以磨损磨粒分析为基础的故障诊断方法。
The ferrography is a fault diagnosis method based on the analysis of wear debris.
磨损规律和机械故障诊断等研究都离不开磨粒分析技术。
The study of wearing rules and mechanical fault diagnoses is based on wear particle analysis.
所做的研究对于设计基于磨粒分析的油液智能诊断系统具有重要意义。
The research results are of great significance for designing an intelligent oil monitoring and…
笔者利用铁谱技术作为一种监测手段，通过磨粒分析来判断发动机的磨损状态。
This paper takes the ferrography technology as a monitoring means, we use wear particle analysis to judge the wear condition of engine.
铁谱磨粒分析技术，可从微观角度对动态过程进行监测，以预测、诊断和及时处理非正常磨损早期故障。
The early malfunction of abnormal wear can be predicted, diagnosed and handled in time by using ferrography to monitor the running procedure from the microscopic view.
在总结柴油机磨损模式的磨粒分析基础上，首次提出在柴油机磨损模式识别中采用基于粗集和模糊理论相结合的模式识别方法。
Based on the analysis of wear particles of diesel engine, a pattern recognition method of the wear mode of diesel engine was originally put forth, by combining rough sets theory and fuzzy theory.
通过给定的磨损参数，并结合经验数据，给出可能产生的磨粒和磨损表面形貌图谱，为后面的故障诊断和磨粒分析奠定了基础。
Based on wear parameter and experience data, the imitated wear particle and surface images of components were given. These are very useful for the fault diagnosis and wear particle analysis.
粒度(记录事实的细节级)：如果要有效地分析数据，就必须都在同一粒度级别上。
Granularity (the level of detail at which a fact is recorded) : If data is to be analyzed effectively, it must all be at the same level of granularity.
沉积物内含有孢粉化石，而每一粒孢粉都含有能告诉我们答案的碳原子标记，容许我们按照地质时间的顺序分析样品。
The sediments contained fossil pollen. Each grain had a telltale carbon atom signature, allowing them to put the samples in chronological order.
本文分析讨论浮选过程矿粒-气泡的相互作用，并对作用势能作了计算。
In this paper, the particle-bubble interaction in flotation is analyzed and the potential energies of interaction are calculated.
全部染色体进行测量分析，计算相对长度和双臂染色体着丝粒指数。
The chromosomes were measured and analysed on the basis of their relative length and centromere index.
分析了磁力研磨加工过程中单个磁性磨粒的受力状况和磨削机理，论述了磁性磨粒的性能要求和制备工艺。
The stress and grinding mechanism of a single magnetic abrasive grain in the magnetic abrasive finishing are analyzed. The required properties and preparation technologies of MAGS are discussed.
本文进行了飞仙关组沉积相的划分与鲕粒灰岩滩体分布的分析。
This paper has divided the sedimentary facies of Feixianguan Formation , and analyzed the distribution of oolitic limestone beach body.
通过该方程与水沙条件的分析，进一步验证了散粒体泥沙起动的流速公式。
Based on the analysis of the equation and condition, the starting current velocity formula about the pill sediment is further proved.
完成了用激光拉曼光谱法测定焊后金刚石磨粒残余应力的实验研究工作，实际测得的残余应力分析的规律与模拟结果相一致。
The measuring experiment of the residual stress of the brazed diamond grains by Raman has been finished. And the results are consistent with the modeling ones well.
目的回顾性总结和分析粟粒性脑结核病的MRI表现特点。
Objective To study and analyze the MRI manifestation of miliary tuberculosis of the brain.
讨论了基于图像的动态粒形分析（DSA）并通过一个范例介绍了该方法对于科研工作的意义。
The use of dynamic image- based shape analysis (DSA) and its benefits to research work are demonstrated by a application sample.
遗传通径分析结果表明，穗粒数与水溶性戊聚糖含量之间的直接通径系数与其遗传相关系数基本一致。
The path analysis showed that the coefficient of direct path and genetic correlation was equivalent between grains number per spike and water soluble pentosan content.
本文就是从这两方面着重介绍了当前国际上流行的磨粒形貌三维分析技术。
The popular three-dimensional imaging techniques of wear particles analysis has been presented in this article.
分析计算了磨粒的形貌，纹理和颜色等几类特征参数，形成一套较为完备的磨粒特征描述体系。
By analyzing and calculating the shape, color and texture characteristic parameters of wear particles, a complete set of wear particle quantification characterization comes into being.
在分析废水中油粒的表面化学性质及浮选剂除油效率基础上，设计出高效浮选剂分子的结构式。
Then It has design molecule structure of floatation agent by analysing the chemical properties of suspending substances in wastewater and the efficiency of removing oil in wastewater.
通过对黄棕壤和黄褐土粘粒胶膜中元素和粘粒矿物的分析，比较了粘粒胶膜和基质土壤的性质、元素和矿物组成之间的关系。
The characteristics of elements and clay minerals of argillans in yellow brown soils and yellow cinnamon soils in the central China were analyzed and compared with their matrix soils.
分析了散粒体临界状态下的变形特征，应用能量平衡原理导出了临界状态下的变形规律。
This paper analyses the deformation characteristics of granular materials at critical state, and the deformation regulation is derived on the principle of energy equilibrium.
文中还讨论用多次拟合逼近法对雾粒多峰分布的信号进行分析的方法。
The multi-peak distribution of signal analysed by multiplex fitting approximating method is also discussed in the paper.
本文首先查阅了大量文献资料，在此基础上分析了粗粒料的设计理论方法的现状，指出了它们各自的特点和存在的问题。
Firstly, based on the a lot of literature datum, the current situation of the coarse materials design theory is analyzed, their characteristics and the existing problems are pointed out.
基于磨粒识别分析的结果，并结合摩擦学理论，实现对发动机磨损状态检测与故障诊断。
Depending on the result of debris analysis and combing with tribology knowledges, we can diagnose and predict wear fault of engine.
利用光学金相和电子探针等分析手段，对铅青铜轴套内表面出现凹坑及碎粒造成的磨损失效进行了分析。
The failure mechanism of lead bronze shaft sleeves with many pits on their internal surface is analyzed by optical metallograph and EPMA.
我们根据土粒的大小来分析土壤，而且，土粒的大小在很大程度上决定着土地的耕作方式，农作物的轮作和种植的作物的种类。
We analyse soils according to the size of the particles and the size of the particles determines to a great degree the different tillages crop rotation and different crops to be grown on the soil.
我们根据土粒的大小来分析土壤，而且，土粒的大小在很大程度上决定着土地的耕作方式，农作物的轮作和种植的作物的种类。
We analyse soils according to the size of the particles and the size of the particles determines to a great degree the different tillages crop rotation and different crops to be grown on the soil.
应用推荐