本文还分析了这种钢镀覆石墨粉末及其烧结材料的金相结构，解释了材料的高导电性的原因。
Metallographic structure of copper coated graphite powder and sintering material were analyzed and the reason of the material having high conductivity was illustrated.
粉末合金刹车片在烧结后有时会意外淬火，造成刹车片钢背脆化而报废。
The accidental quenching, occurring in the sintering process, will make the steel back of a powder alloy brake lining brittle and useless.
研究了碳、硅和铝合金元素对水雾化奥氏体不锈钢粉末烧结时的表面反应的影响。
This paper analyzes the influences of carbon, silicon and aluminium on the surface reaction when sintering austenite stainless steel powder.
采用液相烧结技术成功地将爆炸压制后的钢结硬质合金混合粉末（对应国家牌号TLMW50）复合在碳素钢的表面。
Steel-bonded cemented carbide powder mixture(TLMW50) processed by explosive compaction was successfully bonded to the surface of carbon steel through liquid phase sintering.
研究了碳、硅和铝合金元素对水雾化奥氏体不锈钢粉末烧结时的表面反应的影响。
Influences of carbon, silicon and aluminium on the surface reaction of austenite stainless steel powder during sintering have been studied.
采用液相烧结法将爆炸压实后的钢结硬质合金粉末复合在碳钢表面，成功获得覆层材料。
Steel-bonded cemented carbide powder processed by explosive compaction was successfully bonded to the surface of carbon steel through liquid phase sintering.
试验结果表明：温压工艺能够较大幅度地提高316L不锈钢粉末的生坯密度和生坯强度，也能提高其烧结后的密度和抗拉强度。
Results show that warm compaction can improve the green density and strength of 316L powder greatly and improve its sintered density and tensile strength as well.
研究了水雾化奥氏体不锈钢粉末在烧结时的表面反应。
The surface reaction of water atomized austenitic stainless steel powder during sintering has been studied.
采用直接金属激光烧结的方法，对316不锈钢粉末进行了一系列激光烧结实验。
A series of experiments were carried out on Direct Metal Laser Sintering (DMLS) of 316 stainless steel powder.
研究了粉末烧结双相不锈钢及其时效后的相结构和强韧性。
The phase structure and high toughness of powder sintered biphase stainless steel and after its ageing have been studied.
针对钢芯铝绞线与铝包钢线混架区的特殊要求，用粉末冶金方法研制新型受电弓滑板，分析结构、烧结温度及成分对滑板性能的影响，并将新研制的滑板与厂方原用滑板进行对比分析。
The novel slider is developed by the means of powder metallurgy inorder to meet the requirements of the mixed field of aluminum twisting wire and steel-aluminum wire in electrification railoway.
较详细地论述了不锈钢粉末冶金过滤器的制造工艺及原始粉末形状、粒度、压制压力和烧结温度对过滤性能的影响。
The manufacture technology of sintered steel filter and influence of primary particle shape and size, pressing pressure and sintering temperature on filtering performance are discussed.
本文还分析了这种钢镀覆石墨粉末及其烧结材料的金相结构，解释了材料的高导电性的原因。
Metallographic structure of copper coated graphite powder and sintering material were analyzed and the reason of the material having high conductivity was illust...
综述了添加元素对奥氏体不锈钢粉末压坯液相烧结行为及材料性能的影响。
The paper summarizes the effect of additives on the liquid phase sintering behaviour of the compact of austenitic stainless steel powder and the properties of resultant material.
利用该曲线计算出了纳米不锈钢粉末烧结试样的平均晶粒度。
The mean grain size of stainless steel sintered from nano-sized powder was measured using these calibration curves.
采用液相烧结法将爆炸压实后的WC钢结硬质合金粉末复合在碳钢表面，对不同烧结温度下的界面组织和抗剪强度进行了研究。
WC steel-bonded cemented carbide powders being compacted by explosive compaction were bonded to the surface of carbon steel using liquid phase sintering.
用途：适用于汽车零部件、粉末冶金、不锈钢零件等的钎焊、烧结、固溶热处理工艺。
Applications: Used for the brazing, sintering and solution heat-treatment of automobile parts, stainless steel parts and powder metallurgical product.
高温形变淬火显著改善烧结钢和粉末锻钢的延性和断裂韧性。
HTMT significantly improves the ductility and fracture toughness of sintered steel and powder forging steel.
介绍了水雾化-直接烧结粉末高速钢的研究和动向。
The research and development trend on high-speed steels sintered from water atomized powder ware discussed.
高温形变淬火是形变热处理的一种，它在烧结钢和粉末锻钢的生产中得到了应用。
High temperature thermomechanical treatment (HTMT) is a kind of TMT. It has been applied in the production of sintered steel and powder forging steel.
采用直接金属激光烧结的方法，对316不锈钢粉末进行了一系列烧结实验。
A series of experiments were carried out with direct metal laser sintering (DMLS) for the 316 stainless steel powders.
采用液相烧结技术成功地将爆炸压制后的钢结硬质合金粉末复合在碳素钢的表面。
Steel-bonded cemented carbide powders being compacted by explosive compaction were bonded to the surface of carbon steel using liquid phase sintering.
用途：适用于汽车零部件、粉末冶金、不锈钢零件等的钎焊、烧结、固溶热处理工艺。
Applications: Used for the brazing, sintering and solution heat-treatment of automobile parts, stainless steel parts and powder metallurgical products.
指出了利用粉末冶金制备高氮不锈钢所具有的技术优势，其中注射成形——氮化烧结工艺更具发展潜力。
The producing and shaping technology of high nitrogen stainless steels power were reviewed. The power metallurgy technology for producing high nitrogen stainless steel has some advantages, esp…
指出了利用粉末冶金制备高氮不锈钢所具有的技术优势，其中注射成形——氮化烧结工艺更具发展潜力。
The producing and shaping technology of high nitrogen stainless steels power were reviewed. The power metallurgy technology for producing high nitrogen stainless steel has some advantages, esp…
应用推荐