针对管道焊接机器人设计了一个双处理器的参数调节、实时控制功能的交互式控制系统。
A dual processor interactive control system with functions of welding parameter regulation and real-time control is designed and implemented for pipe welding robots.
管道式紊流絮凝器的结构设计及其絮凝过程。
Structure design and flocculating process. of the pipeline type turbulence flocculator.
给出智能灌溉管道流量计的设计方法，以及高精度传感器的选择。
The design method of irrigation pipe flow meter is presented and high precise sensor is chosen.
通过对适合安装于水平管道的特殊结构的金属管浮子流量计三维湍流流场的数值仿真及实验研究提出一种基于计算流体力学的流量传感器设计方法。
Based on the computational fluid dynamics, a design method for flow meter is given through numerical simulation and experiment on metal tube rotameter with special structure fixed on the level piping.
介绍了氟里昂制冷系统中，在压缩机和蒸发器的各种使用情况下，制冷管道的回油设计。
Provide oil back design of refrigeration piping under various conditions of evaporator and compressor in freon refrigeration system.
建立了基于多微处理器的管道全位置焊接自动控制系统，描述了其系统结构、工作原理和软件设计。
Based on multi microcomputer, the automatic control system of pipeline all position welding process is developed. The system structure, working principle and software design are described.
结合ARM嵌入式处理器的低功耗特性，设计了一种低功耗、便携式地下输水管道渗漏检测仪方案。
With the low power feature of ARM processor, designed an scheme of low power, portable detector of under water pipes leakage.
探讨了基于PPTE传感器的输油管道泄漏检测与定位系统的设计，介绍了它的软硬件构成及其功能。
This paper discusses the design of PPTE sensor application applied in of leakage-detection and location system in the oil pipeline, and introduces its hardware, software and functions.
设计了基于声发射技术的管道泄漏检测无线智能传感器。
A wireless intelligent sensor which can be used to sample the pipeline leakage signal is developed.
保证管道运行工况平稳，给出了执行器故障时容错控制器的设计方法。
When actuator is in trouble, we give a design method of fault tolerant controller for pipeline's normally running.
再如管道设计，经过合理的改造，可以保证热水器、煤气管道互不干扰，正常工作。
Be like conduit design again, the course is transformed reasonably, can assure noninterference of each other of water heater, gas conduit, work normally.
为解决通风管道清扫机器人在水平矩形管道中的自主行驶问题，设计了一种基于红外测距传感器信息的控制算法。
To solve the problem of autonomous running for duct-cleaning robots in horizontal rectangle ducts, a control algorithm based the information of infrared distance measuring sensors is presented.
为了使检测机器人能够在具有螺旋型鳍片的锅炉热交换器承压管道表面上行走，设计了一种新型的复合车轮。
To realize the moving of a detecting robot on the surface of heat exchanger bearing pipes in a boiler with spiral radiators around the pipes, a novel kind of compound wheel was developed.
我们以FPGA作为新型管道漏磁检测器的系统控制核心，对基于FPGA的管道漏磁检测控制系统进行了研究与设计。
We regard FPGA as control's core of new-type pipeline magnetic flux leakage detecting system, research and design control's core of pipeline magnetic flux leakage detecting system based on FPGA.
本文在对泄漏检测技术、检测设备现状和发展趋势进行分析的基础上，设计和开发了经济实用的管道泄漏检测器。
The economical pipeline leak detector was designed and developed after the analysis of the leak detection technology, the leak detection equipment status quo and development trend.
想像设计工作是创建一个小的命令列计算器：使用者类型(或管道)中，一个数学运算式和计算器进行分析和列印结果。
Imagine the design exercise is to create a small command-line calculator: a user types (or pipes) a mathematical expression in, and the calculator parses it and prints the result.
自行设计研制了由超声轮式换能器、驱动系统以及微型计算机控制的信号采集与处理系统组成的管道爬行器。
Together with the wheel probe, the driving system, and the signal collecting and processing system, an automatic pigging system is developed.
探讨了LNG气化站内LNG储罐、气化器和管道系统、消防系统等设施的安全设计要点。
The application situation of LNG is analyzed, and the main equipment and safety design of LNG vaporizing station are discussed.
成套浸管式燃烧器系列提供给设备设计人员和用户一种完整的配好接线和管道的燃烧器，该燃烧器用于加热液体。
The Pyronics TF Packaged Immersion Tube Burner Series are designed to offer the equipment designer and user a completely pre-wired, pre-piped burner package for heating liquid process tanks.
在线内检测器的驱动系统设计是实现输气管道在线内检测的关键技术，是保证输气管道检测结果真实性的重要因素。
Drive system design of on-line detection device is the key technology to realize gas pipeline in-line detection, and the important factor to ensure the authenticity of the test result of gas pipeline.
有偏心和同心式不同设计，连接器必须防止轴向管道移动，如需要可用管锚或控制元件。
PC-35 style Pump Connectors also come in eccentric and concentric taper types. Connectors must be protected from axial piping movement by using pipe anchors or control units as required.
分析了提离值选择的主要原则，并从磁路设计角度，提出了一种通过改进油气管道检测器结构抑制传感器提离值波动影响的方法。
The factors affecting the liftoff were analyzed with a method to avoid the effect of fluctuations of the liftoff by improving the MFL detector magnetic circuit design.
分析了提离值选择的主要原则，并从磁路设计角度，提出了一种通过改进油气管道检测器结构抑制传感器提离值波动影响的方法。
The factors affecting the liftoff were analyzed with a method to avoid the effect of fluctuations of the liftoff by improving the MFL detector magnetic circuit design.
应用推荐