碳纳米管的合成是在石英管式炉中完成。
The synthesis of carbon nanotubes was conducted in a quartz tube furnace.
注：sk型号为管式炉。
焦化厂富油脱苯工艺中，管式炉法较蒸汽法节能。
In coking plants, more energy can be saved by tubular furnace process than steam process in the benzene removal from rich oil section.
把管式炉的前后端盖紧，是炉内的对流减少到最低限度。
The ends of the tubular furnace are closed to minimize convection currents inside the furnace.
介绍一种试验室用管式炉及其自动控温装置的设计方案。
To introduce a plan for designing tubular furnace for laboratory and its automatic temperature control unit.
本文对高炉煤气低温燃烧和管式炉节能减排技术进行了研究。
The technology of blast furnace gas low temperature combustion and pipe still energy-saving and discharge reduction was studied in the paper.
对多个柴油样品用管式炉高温法进行硫含量测定，均得到满意的结果。
Several diesel samples was determined for the sulphur content by tubular oven high temperature procedure and all the results are satisfactory.
分别应用热天平和管式炉反应器对废电路板的热解行为进行实验研究。
The experimental study has been done in a thermo-gravimetric analyzer(TG) and in a laboratory scale tubular furnace reactor, respectively.
用自制一氧化碳发生炉提供的还原气氛，在管式炉中仿制了铜红釉试片。
The sample of red copper glaze was imitated in pipe furnace under the reduction atmosphere offered by self-making co reaction furnace.
Koski和她的研究团队通过气相沉积法在管式炉中合成了这种新材料。
Koski and her team synthesized the new materials through vapor deposition in a tube furnace.
使用该算法，合理布置加热元件，可使圆柱管式炉的等温性能获得较大改善。
It is expected that the program could be used as a software in the design of heating element placement to improve the properties of the furnace.
采用一个管式炉反应器分别考察了焦炉煤气中的组分h2和CO对半焦脱硫的作用。
A tubular reactor has been used to study the effect of H2 and co, which are the components of oven gas, on the removing of sulfur in char.
以快速退火代替管式炉退火大幅度改善了其漏电性能，降低漏电流2个数量级以上。
Rapid thermal treatment was found to greatly reduce leakage current down to 2 orders.
采用正交设计法，在实验室管式炉内、温条件下利用氨气分解产生的活性氮对锰粉进行氮化获得氮化锰粉。
In order to obtain MnN, manganese power has been nitrided by nitrogen decomposed from ammonia at high temperature in pipe type oven at lab.
通过利用管式炉燃烧实验，分别考察了包括煤种、停留时间、粒度、温度等不同因素对燃煤硫析出的影响。
The influence on the sulfur release of different factors are investigated including the combustion temperature, retention time, the type of coal and the particle of coal.
管式炉中燃烧实验表明，试样中硫析出率随温度的升高而增大，而污泥水煤浆比纯水煤浆具有更好的固硫效果。
Experiments in the tube furnace indicated that S-CWS had greater sulfur retention than CWS, and the sulfur precipitation rate increased with temperature rising.
分析了世界乙烯工业的发展趋势，介绍了管式炉蒸汽裂解制乙烯技术的进展状况，以及各种乙烯生产新技术的研究进展情况。
Developing trend of world ethylene industry was analyzed. Recent development of steam cracking and progress of other new ethylene technologies were introduced.
利用管式炉-FTIR二氧化硫检测系统对神华煤与玉米杆和树皮在不同混燃比下混合燃烧时SO2的释放规律进行了研究。
By using FTIR SO2-detecting system of tube-type furnace, the SO2-releasing regularity during mixedly burning Shenhua coal, cornstalk, and bark with different proportioning ratio has been studied.
分析了影响管式加热炉热效率的因素，主要包括过剩空气系数、不完全燃烧、排烟温度等。
Influencing factors on heat efficiency of tubular heaters are analyzed, which mainly include excess air factor, imperfect combustion and exhaust temperature.
火焰式加热炉有两种基本类型：水平管箱式加热炉和立管圆筒形加热炉(图)。
Fired heaters come in two basic styles: horizontal-tube box - type heaters and vertical -tube cylindrical heaters Fig.
重点介绍了辐射管加热无氧化辊底式炉和辊式淬火机的特点。
The characteristics of pipe radiator heating scale-free roller furnace and quenching machine were mainly introduced.
探讨了重质油在管式加热炉里结焦的问题，得到了比较理想的延迟焦化操作参数。
The coking problem of heavy oil in tube heating furnace is studied to obtain more ideal operating parameter fro delayed coking.
它能有效的解决目前管式加热炉故障诊断及相应解决方案严重滞后的问题。
The seriously time-lagging problems of diagnosing malfunction and their relevant solving method for heat tubular-furnace have been efficiently solved.
本文综述了管式裂解炉蒸汽热裂解过程中，焦碳的形成及形态、抑制结焦及焦碳脱除技术、裂解炉烧焦过程研究进展。
Formation and shape of coke in coils of thermal cracking furnace, and advances in technologies of coking inhibitor, especially in decoking were reviewed in this paper.
本文介绍了温度计玻璃管的技术特点，以及垂直拉制这种玻璃管的小型换热式池炉。
Technical properties of capillary tubes for glass thermometers are given and a special recuperative tank furnace for vertically drawing these tubes is described.
根据管式加热炉结构和动力特征的实测结果，提出了简便的计算方法和经验公式。
According to the measurement and analysis of natural vibration characteristics of tube heater, a simplified calculating method and empirical formulae were suggested.
研究了在连续式烧结炉中烧结铜基复合粉末多孔涂层管的新工艺，并对其性能进行了测定。
The new sintered process of porous coating tubes with composite powder based on copper powder in continuous sintering furnaces is researched and their performances are measured in this paper.
并根据管式加热炉的具体情况，建议采用三种不同的计算方法。
Three calculation methods are recommended to suit different cases of tubular heaters.
钢，不锈钢，铜及铜合金的棒，零件和管的热处理连续辊底式炉。
Continuous roller hearth furnaces for the heat treatment of steel, stainless steel, copper and copper alloy bars, sections and pipes.
钢，不锈钢，铜及铜合金的棒，零件和管的热处理连续辊底式炉。
Continuous roller hearth furnaces for the heat treatment of steel, stainless steel, copper and copper alloy bars, sections and pipes.
应用推荐