利用电磁场作用于等离子流发电的热力发电站。
A thermal power station generating electricity by means of an electromagnetic field acting on a plasma stream.
这些粒子叫等离子体，来自太阳的等离子流叫太阳风。
These particles are called plasma, and the stream of plasma3 coming from the Sun is called the solar wind.
太阳内部自东向西的等离子流预示着下一个太阳周期里太阳黑子的形成。
This east-west flow of plasma inside the sun normally indicates the onset of sunspot formation for the next solar cycle.
该项研究工作为选择最佳送粉参量和控制粉末粒子在等离子流场中的运动提供了依据。
This study can found a theory foundation in selecting optimal powder feed parameters as well as controlling the moving trace of powder particles in plasma field.
为了获得比较均匀的大面积直流电弧等离子流，设计了一种利用外磁场驱动电弧旋转的等离子发生器。
In order to obtain a more uniformity flow of the dc arc plasma, the large-scale arc hollow electrode plasma generator with an outer magnetic field is designed in this paper.
本文叙述了TIG电弧的一个较好的数学模型化研究方法。采用数值解的方法着重计算了各种条件对电弧中等离子流的影响。
A better research method for mathematic modelling of TIG arc is described, which puts emphasis on calculating the effects of various conditions on the plasma jet using numerical solution.
你会得到数以百万计维生素C包裹，因为你从这个电表读出的能量不是电子的振动，它是等离子流，它将自身表现为包含振动能量的包裹。
You have millions of Vitamin C packages, because the energy you read on these meters is not electron vibration, it is a plasma flow which manifests itself at a packages of vibration energy.
与上述提到的设计不同之处在于，他们的设计不依赖利用太阳光，而是利用太阳风中的等离子流(每秒310英里/500公里)作为助推动力。
Instead of relying on sunlight, it would use the solar wind's plasma (which travels at 310 miles, or 500 kilometers, per second) as its means of propulsion.
周日太阳表面出现了喷发现象——成吨的日冕抛射物质(等离子体流)被抛到太空中。
The sun's surface erupted early Sunday, blasting - tons of plasma (ionized atoms) into space.
他说这种粒子控制技术能够用于产生等离子体流，从而核聚变发电技术稳定化，实用化。
This particle puppeteering, he says, could be useful in generating plasma currents to stabilize fusion power-generation technologies.
耀斑等离子体流的这种东、西不对称性流动的可能起因也作了讨论。
The possible cause of such an east-west asymmetry of flow of flare-plasma is also discussed.
根据探针收集电子流的理论，提出电子流对探针电位的一次微商的最大值对应着等离子体电位。
Based on the theory of electron current collected by probe, that the maximum derivative of electron current with respect to probe potential corresponds with the plasma potential is presented.
针对等离子点火器内三维湍流燃烧流场，采取有限速率化学反应模型，模拟其物理化学过程。
This paper used a finite-rate method to simulate the three-dimensional combustion process in a plasma generator.
喷入电弧等离子体射流对等离子体反应器流场的影响区域是近轴区，对过渡区和近壁区没有影响。
The arc-plasma jet in jested into the reactor exerted influences on the flow field in the hear-axis zone, while no influences in the transition and the near-wall zones.
APC通过氩气离子流(氩气等离子区)传导单极电外科高频电流到生物组织对其产生凝血作用。
APC conducts monopolar electro surgical high frequency current to tissue via an ionized argon gas stream (argon plasma) to coagulate the tissue.
基于流动注射-在线柱预浓集-微波等离子体炬原子发射光谱，对在线浓集测定流路和各种测试条件进行优选，建立了一种测定痕量铜的新方法。
A new method for determining trace-level copper ion was proposed based on flow-injection on-line preconcentration and microwave plasma torch atomic emission spectrometry.
结果表明，由于雷诺胁强的径向变化，托卡马克等离子体可以自发地产生剪切极向流。
The results indicate that the sheared poloidal flow can be generated in the plasmas due to radial variations in Reynolds stress.
结果表明，雷诺胁强的径向变化可以自发产生托卡马克等离子体的剪切极向流。
The results indicate that the sheared poloidal flow can be generated in tokamak plasma due to the radially varying Reynolds stress.
等离子体弧切割是通过高温等离子体弧将工件弧柱部分的材料熔化并利用高速离子流将切渣吹除的物理过程，弧柱的功率和作用力将直接影响到切口质量。
Plasma arc cutting is a physical process which utilize high temperature to heat materials and high speed flow to blow melted metal, cutting quality is directly influenced by arc power and arc force.
利用气体放电产生的等离子体朗缪尔流效应来使敏感元件产生一定速度的运动，不需另外的驱动元件。
Plasma Langmuir flow effect produced by gas discharge was used to make sensitive component move at a certain velocity without further drive part.
研究了在具有剪切本底流的非磁化等离子体中离子声波的激发及其与涡旋的转化。
Temporal evolution of the low frequency electrostatic perturbations in an unmagnetized plasma with strong shear flow is investigated.
为进一步研究激光支持等离子体流场特性和脉冲激光推进性能等提供重要的理论依据。
All of these provide an important theoretical basis for further study of the characteristics of laser sustained plasma flow field and the pulsed laser propulsion experiment.
介绍了与高密度等离子体工艺相关的模型和数值模拟方法，即连续流和动力学方法。
Methods in modeling and numerical simulation for the high density plasma processing are introduced, namely, continuous and kinetic methods.
用混沌动力学方法对多道扫描静电探针的离子饱和电流信号进行分析，研究了等离子体尾迹流场。
A plasma wake flow field is studied by analyzing the saturated ionic current of multiple scanning probes with the method of chaos dynamics.
以轴对称非定常欧拉方程为基础，建立了激光推进火箭发动机吸收室内纯气相单组分、以激光等离子体为内热源的流场模型。
A gas flow model with laser plasma as heat source was developed based on axial symmetric Euler equations in the laser propulsion rocket engine absorption chamber.
结果表明，当射频场的频率小于或等于离子等离子体频率时，离子流密度明显地随时间变化。
It has been shown that when the RF frequency is less than the ion plasma frequency, the ion flux density will strongly depend on the time.
在静止的空气中诱导了流场，验证了应用辉光等离子体实现主动流动控制的新思路。
The flow was induced by plasma, which confirms that active flow control can be come true by applying glow plasma.
本文研究载流等离子体中的非线性气球模。
This paper investigates the nonlinear ballooning mode in current-carrying magnetized plasmas.
采用涡耗散概念（EDC）模型，对等离子发生器内三维湍流燃烧流场进行数值模拟。
The eddy-dissipation-concept (EDC) model is used to simulate the three-dimensional combustion process in a plasma generator.
以已有的湍流尾迹等离子体流场数据为基础，分析了再入尾迹湍流等离子体流动对雷达散射截面的影响。
Based on the flow field parameters about the turbulent wake and this scattering model, the effects of reentry wake turbulent plasma is analyzed on the radar cross section.
应用推荐