本文介绍了国内外镁合金等温锻造的进展。
The development of isothermal forging process on magnesium alloy domestic and international was presented in this paper.
利用等温锻造方法可生产优质的球墨铸铁管。
Using the method of isothermal forging spheroidal graphite cast iron pipe of good quality can be produced.
等温锻造的半成品已经接近成品尺寸，余量很小。
Isothermal forging of semi-finished products are close to finished size, very small margin.
对等温锻造技术及其在航空工业中的应用作了系统阐述。
Isothermal forging technology and its application in aviation industry are systematically discussed.
研究了LD 5铝合金等温锻造成形高筋薄壁锻件的工艺特性。
The isothermic forging properties of LD5 alloy for making high web and thin wall forgings are studied.
本文的研究结果为实现粉末高温合金盘件超塑性等温锻造奠定了基础。
The work in this paper can provide useful information for isothermal forging process of P/M superalloy turbine disk.
研究了不同等温锻造温度对2b70铝合金显微组织与力学性能的影响。
The effect of isothermal forging temperature on microstructure and mechanical properties of2B70 aluminum alloy was studied.
研究了不同等温锻造温度对2b70铝合金显微组织与力学性能的影响。
The effect of isothermal forging temperature on microstructure and mechanical properties of 2b70 aluminum alloy was studied.
等温锻造成形过程中温度基本不变，可消除镁合金在常温下成形性能差的问题。
So it is usually processed by isothermal forging, which provide selected temperature steadily to improve the plasticity of magnesium alloy.
研究这些合金的超塑性能，对采用超塑性等温锻造方法制造复杂形状锻件具有重要意义。
It is of great significance to research on the superplastic properties of these alloys for using superplastic isothermal forging to manufacture complex forge pieces.
通过采取相应措施防止氧化，以提高钛合金超塑性变形的性能，确保钛合金等温锻造质量。
Thus the efficient measure of preventing from oxidization was introduced to improve the superplastic deformation and quality of isothermal forging for titanium alloy.
上述研究为TA15合金连接件的等温锻造工艺的优化设计及质量控制提供了理论和技术上的支持。
This work provides the theory and technique foundation for implementing process optimized design and quality control scheme of TA15 alloy connecting piece isothermal forging process.
研究这些合金的晶粒细化和超塑性能，对采用超塑性等温锻造方法制造复杂形状航空锻件具有重要意义。
Therefore, it is of great significance to research the superplastic properties of these alloys for using superplastic isothermal forging to manufacture complex aviatic forge pieces.
分析了TC 11钛合金中氧、铁、氮等杂质元素含量对应用等温锻造工艺生产的航空发动机盘件的性能影响。
In this paper, the effect of the contents of the impurity elements such as oxygen, iron, nitrogen in TC11 titanium alloy on the performance of aircraft engine disk by isothermal forging was analysed.
锻坯硬度分布测试表明随着近等温锻造变形量的增大，均匀变形区域的硬度变化基本趋于均匀一致，且硬度平均值也在不断增高；
The hardness testing shows that hardness of uniform zone is tending to be uniformity and the average hardness is continuous to increase.
本文从提高生产率和节能出发，研究了桑车齿轮锻造余热等温退火工艺。
For the sake of energy-saving and productivity rising, isothermal annealing by use of residual forging heat of the gears for the Santana car has been studied in this paper.
钢锹热处理采用锻造余热等温淬火新工艺，并通过设备改造保证其质量，达到节能降耗的目的。
New forged austempering technology is used in steel spade heat treating for energy-saving and the quality of the treated spade is guaranteed in a retrofitted equipment.
[18] 张大伟，杨合。大型钛合金整体隔框锻件：局部加载等温成型技术[J]。锻造与冲压，2012（21）：32-38。
(ZHANG D W, YANG H. Large integral bulkhead of titanium alloy forgings: isothermal local loading forming technology [J]. Forging & Pressing, 2012(21):32-38.
运用有限元软件对钼粉烧结体近等温包套锻造成形过程进行了分析。
Abstract :Near-isothermal canned forging for molybdenum powder sinter was investigated by using finite element software.
适用于批量性轴承内、外套圈及锻造件的等温球化退火。
JK703 Serial energy efficient double row push rod isothermal nodulizing annealing furnace.
适用于批量性轴承内、外套圈及锻造件的等温球化退火。
JK703 Serial energy efficient double row push rod isothermal nodulizing annealing furnace.
应用推荐