本文描述了等温应力松驰的检测方法及使用此方法对皮胶原的耐湿热稳定程度的研究。
Current research has been focused on the studies of isothermal tension and its relaxation, its relation and their application on investigation of the hydrothermal stability of skin collagen.
采用热重法研究头孢氨苄热分解非等温动力学和头孢氨苄与其制剂的稳定性差异。
Thermogravimetry was used to study the non-isothermal decomposition kinetics and the difference of stability between cefalexin and its excipients.
研究了不同等温锻造温度对2b70铝合金显微组织与力学性能的影响。
The effect of isothermal forging temperature on microstructure and mechanical properties of2B70 aluminum alloy was studied.
本试验的目的是研究不同变质程度的煤在惰性气氛中的非等温热解。
In this paper the pyrolysis of coals with different metamorphism is performed under inert gas ambience in a non-isothermal reactor.
研究这些合金的晶粒细化和超塑性能，对采用超塑性等温锻造方法制造复杂形状航空锻件具有重要意义。
Therefore, it is of great significance to research the superplastic properties of these alloys for using superplastic isothermal forging to manufacture complex aviatic forge pieces.
采用差示扫描量热法研究蒙脱土（MMT）对聚丙烯（PP）等温结晶性能的影响。
The effect of montmorillonite (MMT) on the isothermal crystallization of PP was studied by means of DSC.
研究了不同等温锻造温度对2b70铝合金显微组织与力学性能的影响。
The effect of isothermal forging temperature on microstructure and mechanical properties of 2b70 aluminum alloy was studied.
本文给出了一个用于研究PEM燃料电池内水迁移的稳态、等温、两相流模型。
A steady state isothermal two-phase flow model is presented in this paper to study water transport in PEM fuel cells.
通过半固态等温压缩实验，研究了7a04合金在半固态压缩过程中的力学行为。
The mechanical behavior of 7a04 alloy in the semisolid state has been studied through isothermal compression tests.
目的：研究了腺苷的热解过程及非等温动力学。
Purpose: to study the thermal decomposition process and the non isothermal kinetics of adenosine.
研究这些合金的超塑性能，对采用超塑性等温锻造方法制造复杂形状锻件具有重要意义。
It is of great significance to research on the superplastic properties of these alloys for using superplastic isothermal forging to manufacture complex forge pieces.
研究了等温淬火温度对ADI中残余奥氏体及其力学性能的影响。
The influences of isothermal quenching temperature on the retained austenite and mechanical properties of ADI were studied.
研究了硅和等温淬火工艺对高碳低合金马氏体-贝氏体钢金相组织与机械性能的影响。
The effect of silicon and isothermal quenching process on the microstructure and mechanical property of the high-carbon low alloy martensite-Bainite steel was studied.
主要研究筋板类锻件等温精密成形技术。
The study is focused on isothermal precision forming technology of rib-web forging parts.
以棕红壤为对象，采用等温平衡吸附法，研究了不同有机酸种类和浓度对土壤磷吸附的影响。
It was studied that the effect of different kinds of organic acids and their concentrations on the soil phosphate absorbing capacities by way of isothermal absorption in the brown soil.
采用DSC方法研究了PA1212的非等温和等温结晶动力学。
The non-isothermal and isothermal crystallization kinetics of PA1212 were studied by DSC.
澳大利亚广播引用了她的话：“现在已经有一些关于营养活性物质的研究，但焦点更多的还是放在了例如椰菜和葡萄等温带水果上。
There's been a lot of research looking at nutritional bioactives but it's focused on more temperate fruit like broccoli and grapes.
用非等温热重法研究了代森锰锌的热分解反应动力学。
Non-isothermal thermal decomposition kinetics of mancozeb was studied by thermogravimetry.
研究了等温退火对非晶金刚石薄膜电子场发射性能的影响。
Effect of annealing on electron field emission properties of the a-D films was also studied.
本文的研究结果为实现粉末高温合金盘件超塑性等温锻造奠定了基础。
The work in this paper can provide useful information for isothermal forging process of P/M superalloy turbine disk.
采用非等温结晶动力学处理方法获得了与等温结晶动力学研究相一致的结果。
The non - isothermal crystallization kinetic treatments get the similar results with that of the isothermal study.
用dsc、非等温结晶动力学方法研究了PET切片中不同二氧化钛含量对其结晶性能的影响。
The effect of titanium dioxide content on the crystallization behavior of PET was studied by DSC and non-isothermal crystallization kinetic methods.
用等温热重技术研究了三种新型尾式卟啉三已胺和吡啶季铵盐的热稳定性及寿命。
The thermal stability and lifetime of three new tailed porphyrin triethylamine and pyridine quaternary ammonium salts were studied by isothermal thermogravimetric method.
对亚共晶白口铸铁经高温形变后所获得的碳化物在等温球化过程中球化长大进行了研究。
The spheroidizing grow, in isothermal spheroidizing process, of carbides formed from deformation under high temperature in, hypoeutectic white cast iron is studied.
研究了合金渗碳钢锻件的普通正火与等温正火工艺参数对组织、性能的影响。
The microstructure and property of alloy carburizing steel forged parts after general normalizing and isothermal normalizing were studied.
研究了半固态等温温度、搅拌速率和挤压力对成型件质量的影响。
The influence of the isothermal temperature, the stirring speed and the extrusion pressure on quality of the formed parts were investigated.
上述研究为TA15合金连接件的等温锻造工艺的优化设计及质量控制提供了理论和技术上的支持。
This work provides the theory and technique foundation for implementing process optimized design and quality control scheme of TA15 alloy connecting piece isothermal forging process.
研究了在不同等温淬火温度热处理后高硅铸钢的显微组织与残余奥氏体量和材料断裂韧性间的关系。
The influence of austempering treatment on the microstructure, retained austenite and fracture toughness of high silicon cast steel has been studied.
研究了在不同等温淬火温度热处理后高硅铸钢的显微组织与残余奥氏体量和材料断裂韧性间的关系。
The influence of austempering treatment on the microstructure, retained austenite and fracture toughness of high silicon cast steel has been studied.
应用推荐