提出了选择机械密封等温模型和绝热模型的原则。
The criterion of choosing the isothermal model or the adiabatic model was proposed.
建立以无相互作用的自族为1/2的粒子组成的自旋系统为工质，由两个绝热和两个等温过程组成的量子卡诺制冷循环模型。
The cycle model of a quantum Carnot refrigeration cycle working with many non-interacting spin-1/2 systems and consisting of two isothermal and two adiabatic processes is established.
根据对树脂固化特性和等温粘度曲线的分析，建立了树脂体系的工程粘度模型。
Based on analyzing the curing characteristics of the resin system and the isothermal viscosity curves, an engineering viscosity model was developed.
本文给出了一个用于研究PEM燃料电池内水迁移的稳态、等温、两相流模型。
A steady state isothermal two-phase flow model is presented in this paper to study water transport in PEM fuel cells.
采用等温积分反应器，测试了KD306型耐硫甲烷化催化剂的本征动力学，建立了幂函数动力学模型。
The intrinsic kinetics of KD306 type sulfur tolerant methanation catalyst was studied in an isothermal integrated reactor and the reaction model of power functions type was established.
试验和分析结果将为建立非等温烧结模型和烧结工艺参数的优化方法提供依据。
The experimental and analytical results make the reference for building the non-isothermal sintering model and for the optimization of sintering process parameters.
提出不等温的燃煤热解反应动力学模型。
Nonisothermal kinetic model of coal pyrolysis has been proposed.
本文运用达西流模型，对饱和含湿多孔介质中环绕水平等温圆柱发生的自然对流进行了数值模拟和分析。
Natural convection around a horizontal, isothermal cylinder in an infinite, fluid-saturated porous medium is modeled analytically using the Darcy flow model.
以流体力学三大守恒方程为基础，建立了等温和非等温条件下的燃气管网稳态和动态仿真理论模型。
The theoretical dynamic simulation models for stationary flow and transient flow under the isothermal and non-isothermal condition are set up based on the three conservation equations.
在确定模型的一些参数时，采用等温力学试验和疲劳试验的数据，把等温疲劳研究成果推广到变温疲劳分析领域。
In identifying parameters of the models, isothermal fatigue test results were applied A method using isothermal cycle data for predcting thermomechanical fatigue life bine was developed.
对于单层模拟，分别进行了等温牛顿模型和非等温非牛顿模型的分析。
The isothermal and Newtonian model for single layer melt flow was analyzed, as well as the non-isothermal and non-Newtonian model.
实验结果表明：采用前沿分析法和逆向法确定的吸附等温线与吸附数据吻合很好，验证了所选模型的合理性。
The results showed a good agreement between the isotherm determined by frontal analysis and inverse method, and the adsorption data which confirmed the validation of the model selected.
常压下使用等温积分反应器研究了B110中温变换反应的本征动力学模型。
The intrinsic kinetic model of shift reaction over B110 high-temperature shift catalyst has been investigated in an isothermal integral-reactor.
并把非等温过程模型的搅拌反应器模型和估计算法应用于实验装置上。
The models of the non-isothermal CSTR and estimating algorithms have deen verified successfully at a pilot plant.
结果表明，吸附等温线很好的符合兰缪尔模型和佛兰德利希模型。
It was observed that the adsorption isotherms are well represented by both the Langmuir and Freundlich isotherm models.
为了使试验结果尽可能接近真实燃烧过程，本文提出一种适用于非等温射流的后移燃烧器几何相似模型。
In order to approach as near as possible the actual combustion process, a mode! With geometric similarities for moved-out burner is described which is applicable to non-isothermal jet.
针对幂律型流体，建立了稳态三维粘性不可压缩流体非等温流动的有限元模型。
The modeling for three-dimensional incompressible viscous non-isothermal steady flow was presented by using penalty finite element method.
最后，建立了三维等温奥氏体-铁素体相变的元胞自动机(3dca)模型。
Finally, a three-dimensional cellular automaton model (3dca) is developed to simulate the microstructure formed during the austenite to ferrite transformation.
因此，在浓度较大时，采用线性吸附等温模线会得到偏不安全的结果。该解相对较简单，并可用于验证各种数值模型，拟合试验数据等。
The present method was relatively simple to apply and could be used for evaluating experimental results and verifying more complex numerical models.
结果表明，该模型能很好地描述无间隙原子钢等温退火再结晶过程。
The result shows that the model can be used to describe the recrystallization process of the interstitial free steel quite well.
结果表明，该模型能很好地描述无间隙原子钢等温退火再结晶过程。
The result shows that the model can be used to describe the recrystallization process of the interstitial free steel quite well.
应用推荐