与分段等效线性化方法相结合，也可用于某些非线性系统的响应计算。
Combined with the piecewise linearization, it can be used to compute the response of some nonlinear system.
提出了用等效粘性阻尼理论和试验相结合，建立金属橡胶材料动态力学模型的一种新方法。
A new method for setting up the dynamic model of metal-rubber materials was proposed by using the equivalent viscous damping theory.
新的运算法则结合了与标准坐标转换技术等效的方法，从而解决了在许多应用领域内出现的相关求解问题。
The new algorithms combine the methods of equivalence with standard coordinate transformation techniques to solve a variety of problems that occur in applications.
利用横向谐振法结合奇异积分方程技术，导出了具有快速收敛特性的不连续性等效电路参量计算公式。
A formulation for the equivalent circuit parameters of the discontinuities with superior convergency is derived by the transverse resonance method with the singular integral equation technique.
这种方法利用等效口径分布等化结合超分辨算法实现方位超分辨。
The method combines equivalent aperture normalization and a non-linear spectral estimation algorithm.
定义加热器回热率的概念，结合等效焓降法，计算高压加热器切除对机组热经济性的影响。
By giving the concept of heater regeneration rate, and combining with equivalent enthalpy reduction method, the influence on heat economy with HPs off-line is calculated.
在整机建模的过程中，利用吉村允孝积分法计算出各个结合面的等效刚度及阻尼。
In the process of modeling, equivalent stiffness and damping of combine surface was calculated by Takashi Yoshimura integration method.
提出了一种光波导中全光等效光速减缓方法，并结合计算机模拟和实验结果进行分析。
This article propose a kind of all-optical equivalent controlled light speed slowdown method in the optical waveguide, and carry out analysis combining with the imitative and experiment test result.
采用了时间步长法、等效法以及二者结合的等效时间步长法三种方法求解模型。
The model was solved with the application of different methods, such as time step method, equivalent method and their combination.
基于有限元计算软件ANSYS，结合工程实例，利用参数化设计语言APDL将拱坝等效应力应用于应力约束，进行拱坝体型优化设计。
With the ANSYS software and practical project example, the equivalent finite element stresses is applied in stress restriction for the shape optimization of arch dam by using APDL.
基于这种变频法思想，结合傅里叶变换频谱分析法推导了介质损耗参数的工频等效计算公式和算法。
Applying Fourier transform frequency spectrum analysis, the equivalent formula and arithmetic for calculating the dielectric loss at power frequency are deduced.
采用楔形构件等效截面特性的概念，结合我国规范推导出以大头截面为计算截面的受弯稳定性计算公式；
Using the conception of equivalent cross-section, the formula of elastic carrying capacity at the larger end of the tapered member is suggested.
将所得变化规律与等效粘性阻尼理论相结合，给出了一种依赖于应变和频率的非线性阻尼本构关系式。
Based on above fitted relation and equivalent viscous damping theory, a nonlinear constitutive equation of damping alloy depending on strain amplitude and frequency is put forward.
最小最大带宽估计策略，基于等效带宽和边界带宽机制，结合测量机制在提高资源利用率的同时控制了接入分组丢失，保证了服务质量；
Min-Max estimate mechanism based on the equivalent bandwidth and bound bandwidth, composed with the measurement mechanism, it controls the packet lost, guarantees the quality of service.
结合工程实例，采用该模型计算了桩基的自振频率，分析了弹簧等效刚度的变化对模型自振频率的影响。
Meanwhile, the natural frequency was calculated using this method in an example, and the natural frequency affected by the change of equivalent spring stiffness was also analyzed.
结合等效射线管模型和物理光学法实现了复杂目标高频电磁波多次散射高效且精确的数值求解。
Using physical optics to calculate single scattering, and using equivalent ray tubes to calculate multiple scattering, we can get the numerical results more efficiently and accurately.
研究了在板料成形毛坯设计中加入等效拉延筋进行计算的毛坯设计方法，提出了利用反向方法结合等效拉延筋进行毛坯设计的设计思想。
The application of equivalent draw beads to sheet forming blank design is studied and the ideal of blank design using revering method combined with equivalent draw bead is conceived.
研究了等效拉延筋在板料成形毛坯设计中的应用，提出利用反向方法结合等效拉延筋进行毛坯设计的设计思想。
This paper studied how to apply the equal effective draw-bead to blank design, put forward that the blank design should combine with the effect of the draw-bead.
将等效线性化法与谐波平衡法相结合，求出了系统的近似解析响应。
By combining equivalent linearization method with harmonic balancing technique, the approximate analytic response was obtained.
利用改进的BP算法，结合电波传播理论，建立了随机雨介质的等效复折射指数的神经网络模型。
The neural network model of the equivalent complex refractive of random rain media is developed by means of the improved BP algorithm, based on the electromagnetic wave propagation theory.
应用虚位移原理和结合考虑材料交界面上的约束条件，文章建立了接触单元的刚度矩阵和等效荷载向量。
Employing the virtual displacement principle and considering constraint conditions of material interface, the stiffness matrix and equivalent load vector for this element are established.
另外，对照的设立应结合考虑RCT研究的目的和设计，如非劣效性、等效性、优效性试验。
Besides, the selection of controls must focus on the design and aim of RCTs, such as non-inferiority, equivalence and superiority trials.
为了优化计算，提出了线电荷与点电荷相结合的等效电荷法。
In order to optimize the computation method, the charge simulation method has been developed combined with the equivalent line and point charge.
本文根据弹塑性力学模型，提出了单桩等效极限位移的概念，并结合桩的静载试验成果，对其进行了分析探讨。
Based on the model of elastic-plastic mechanics, this paper presents the conception of equivalent ultimate settlement of single pile, which is studied with results of static loading tests on piles.
本文提出了一种将等效静力优化算法和分级优化算法相结合的船舶板架结构动力响应优化方法。
In this paper an optimization design method composed of equivalent static algorithm and multistage algorithm is proposed for grillage structures.
针对高损耗衬底，基于复镜像理论，结合部分元等效电路法，建立了一种新的片上互连线物理模型。
A new physical model for on-chip interconnect on high lossy substrate is proposed based on complex image theory and PEEC.
将修正的矢量等效折射率模型和耦合模理论相结合，系统地研究了光子晶体光纤长周期光栅(PCFLPG)的特性。
The properties of long period gratings in photonic crystal fibers (PCFLPG) are systematically analyzed by the improved full-vector effective index model and the coupled mode theory.
结合血压曲线，计算冠状动脉的等效阻抗。
Together with the blood pressure waveform, the coronary artery impedance is obtained.
多谐振腔宽带换能器的理论分析采用经典等效电路法与有限元法相结合的方式。
Equivalent circuit method and finite element method have been studied for theoretical analysis of the resonator transducer.
多谐振腔宽带换能器的理论分析采用经典等效电路法与有限元法相结合的方式。
Equivalent circuit method and finite element method have been studied for theoretical analysis of the resonator transducer.
应用推荐