探讨了等强度悬臂梁的动应变分布。
Distribution of dynamic strains for beam of constant strength has been investigated.
本实用新型属于篮球运动设施，具体涉及一种等强度篮圈。
The utility model belongs to a basketball sport facility, which in detail relates to an equal strength basketball hoop.
来自这个分析的结论有粗略等强度适用于两个器官中的任一个。
The conclusions from this analysis apply to either organ with roughly equal strength.
此外，等强度合成是获得最大合成强度、简化实验的最佳合成方式。
In addition, beam combination with identical intensity is the best method for getting the maximum intensity and simplifying operation.
从等强度概念出发，推出一个据以选取渐开线齿轮齿数的简单、实用公式。
This paper advanced a practical and succinct formula for tooth number choice of involute gear.
根据气门运动规律设计气门弹簧特性，按等强度原则设计组合式气门弹簧。
The design of the valve spring performance should be in accordance with the valve movement pattern and...
介绍了等强度梁动应变冲击试验测试仪器的控制系统设计和其中一些关键技术。
The design of dynamic strain impact testing apparatus of beam with equal strength and some important technique are introduced.
介绍了采用等强度梁和与测量片并联电阻的方式测定电阻应变片的灵敏系数的方法。
It introduced the methods of measuring the sensitive coefficient of the strain gauge of electrical resistance by means of equal-strength beam and the parallel connection with the measure gauge.
非等强度自动加压固定板，是一种骨科用于临床治疗长管状骨折手术的内固定器械。
The utility model relates to a non equicohesive automatic pressure fixation plate, which is an internal fixation instrument used for the clinical operation of treating long tubular fracture.
最终给出剖面等强度设计一般的指导性原则，及整个上层建筑范围内的结构设计原则。
Finally, the basic guide principles are given about equal strength design of a certain section and also the whole range of superstructure.
计算结果表明，准端面圆弧齿轮基本上是沿齿高方向等强度分布，优于法面圆弧齿轮。
Computing result indicates that quasi transverse circular arc gear is basically equal on strength distributing along tooth depth direction and it is superior to normal plane circular arc gear.
模拟和实际结果表明，采用上述参数可获得壁厚均匀，等强度，轻重量的薄壁钛环形管。
The simulation and practical results show that the titanium thin pipe of a uniform wall thickness, equal strength and light weight is achieved by using the above optimized parameters.
本文介绍了钢筋等强度直螺纹连接的技术原理、性能特点及其在实际施工中的应用前景。
In this article, the writers introduced the principle of technology of jointing the reinforcement uniform strength straight spiral grains.
模拟和实际结果表明，采用上述参数可获得壁厚均匀，等强度，轻重量的薄壁钛环形管。
The simulation and practical results show that the titanium thin pipe of a uniform wall thickness, equal strength and lig...
其全部机械设计采用了等强度、可靠性设计方法，初步达到了高效低成本生产加工的目标。
With equal strength, reliability design for all machines, the high efficiency and low cost production process was presented.
介绍了两级直齿圆锥—斜齿圆柱齿轮减速器等强度优化设计的数学模型及优化方法的选取。
In this paper, a mathematical model and the selection of optimization method for equal strength optimized design of two-stage straight bevel gear-helical cylindrical gear reducer are introduced.
并将该方法应用于机器人操作器的等强度优化设计问题，得到操作器等强度设计的最优形状。
By using this approach, the paper discussed the equal strength optimal problem of robot manipulators, and the optimal shape is gained.
螺旋桨表面和它的尾涡面离散为四边形双曲面元，每个面元上布置等强度偶极子和源汇分布。
The surface of propeller and its trailing vortex is divided into a number of small hyperboloidal quadrilateral panels with constant source sink and doublet distributions.
基于现代不确定度理论，探讨了高精度等强度标定梁的优化，确定了最佳设计方法和设计参数。
According to the theory of uncertainty, optimization on the highly accuracy equal strength beam for calibration has been investigated. The optimum design method and parameters have been determined.
采用等强度梁、挠度计、并联电阻箱、电位差计等测定电阻应变计的灵敏系数是一种常用的方法。
Shunting resistance box is a commonly used method in the determination of the sensitivity coefficient of the resistance strain gauge with the equal-strength beam aparatuses.
通过正交试验方法验证得到：在上述参数条件下可以获得壁厚均匀、耐高压、等强度的钛合金环形管。
The titanium ring pipe with uniform wall thickness, high-voltage-resistance and equal strength was obtained using the above mentioned parameters, detected by the orthogonal test.
研究结果表明，既考虑等强度条件又考虑可靠性要求，是使机械体积或重量达到最小的最有效的优化途径。
The results show that combinig equi strength conditions and reliability requirement together is one of the most efficient methods that can minimize the volume or weight of the mechanism.
健身专家称，理想的安排是一周进行两到三次高强度锻炼，并加入瑜伽、健走或负重训练等强度较低的项目。
An ideal schedule would be two to three high-intensity workouts during the week, mixed in with lighter workouts like yoga, walking or weight training, say fitness experts.
设计并制作了光纤光栅涡街流量传感系统，包括传感器封装法兰、等强度悬臂梁、涡街发生体等关键传感单元。
We designed and produced a fiber grating vortex Flow sensor system, including sensor package flange, uniform intensity cantilever, vortex generating body et al and other critical sensing units.
电阻与感抗。机械方面讨论了电缆直径、铠装设计等强度问题，以及电缆设计与使用和操纵设备操作方式的关系。
Mechanically, it deals with the strength problems such as the cable size and the armour design, and the relations between the cable design and cable handling system in operation are also emphasized.
对此本文提出了利用缺陷的回波信息调整后续驱动器激励信号强度，从而达到缺陷处等强度效果的可控强度激发技术。
The technology which can control the transducer's driving strength according to the message of Echo is proposed in this paper.
主要结果如下： （1）在伴随质子事件的微波爆发各参数中，以峰值流量密度、能量密度等强度参数与质子流量相关最好；
The main results are as follows:(1) The intensity parameters are more useful than the other parameters for indicating the intensity of associated solar proton events.
过盈值如何选取才能使组合筒的承载能力最大，本文就此问题从等强度理论出发推导出组合筒在内压作用下最优过盈的公式。
In order to maximize the beating capability, the paper derivates the best over-surplus calculation formula from the Angle of equal-intensity.
过盈值如何选取才能使组合筒的承载能力最大，本文就此问题从等强度理论出发推导出组合筒在内压作用下最优过盈的公式。
In order to maximize the beating capability, the paper derivates the best over-surplus calculation formula from the Angle of equal-intensity.
应用推荐