位置精度：符合图纸要求。
新加工的阀芯阀座一定要符合图纸要求。
The new processing spool valve seat must meet the requirements of the drawings.
模板、支架应符合图纸要求和本规范第402节的规定。
Stencil and supporting frame shall comply with the requirement of the drawing and the regulations of Section 402.
锥度：任何轴承部件的表面角度不正确或者不符合图纸要求。
TAPER: any surface of any bearing part that is not the correct Angle or not to print.
石砌体所用材料应符合图纸要求及本规范第413节的规定。
Rocks material used for masonry shall comply with the requirement of the drawing and the regulations of Section 413.
通过数控插补方法加工出来的高精度球轴承符合图纸要求，满足了使用需要。
The drawing requirements were met by NC interpolation and application needs were satisfied.
在此基础上，对4种规格8件风道零件进行了工艺过程设计和实际加工，产品完全符合图纸要求。
On the basis of this, process planning of 8 ducts of 4 specifications are designed and machined. The products fully meet the requirements of the drawing.
如果图纸或订单上没有提供这一尺寸，则坡口尺寸应符合认可的焊接流程(WPS)中规定的要求。
If no dimensions are provided as part of the drawing or ordering documents, the dimensions shall meet dimensions specified by approved welding procedures (WPS).
所有焊接准备应符合图纸上规定的尺寸要求(无论是通过图纸尺寸还是焊接规范提供，均可作为依据)。
All weld preps shall meet drawing specified dimensions (whether provided via dimensions on the drawing or in a welding specification).
不，标高符合图纸规范的要求。
尺寸检查：指各种检查产品的方法，采用标准零件进行比对测量，采用量表检查待检产品是否符合图纸的规格要求。
DIMENSIONAL INSPECTION: Method used to check product made by machines and then gauges using masters and dial indicators to check them in comparison to blueprint specifications.
本产品在制造过程中经质量检验，符合施工图纸要求。
The product experience all quality inspection during mfg, and accordance with the requirements of the construction drawings.
工程质量符合设计图纸和相关规范、标准的要求；
The construction quality is conformity in the requirements in the design drawings and the relative specifications and standards.
负责工厂的建筑物和公用设施的技术图纸、手册、文件、运行维修记录，确保公用系统图纸的及时更新，使其符合GMP要求。
Tidy up and manage the technical drawings, manual, documents, maintenance record and keeping the updated drawings to comply with cGMP requirement.
设计出的图纸基本符合工程实际要求。
The drawings have been basically met the demand of practical engineering.
安装前首先应核对安装节点的位置、安装尺寸、阻尼器的型号等是否符合设计图纸及文件的要求。
Prior to installation, check first whether location of installation node, installation dimension and damper model etc meet the requirements of design drawing and documents.
核对建筑结构图纸确保符合幕墙安装的要求。
To check the building structural drawings to meet the curtain wall fixing details.
产品在保证的合同期限内，提供的产品完全符合产品质量要求，规格和化学性能完全按照图纸设计要求。
We guarantee that the product in contract term completely conforms to the product quality requirement, and the specification and chemistry performance conforms to blueprint design requirement.
工程内容及质量符合要求的，双方签字确认，同时乙方将全部图纸资料移交给甲方。
Should contents and quality is in accordance with the requirements, both Parties should signed to confirm, and Party B should handed all the documents to Party A.
结论新建餐饮业施工图纸难以符合设计卫生学要求。
Conclusions the Designed Drawings of New Buildings for Dining were not enough meet the hygienic request.
施工图纸和施工说明应符合防火防事故的要求，主要包括电气线路等管道畅通、合格。
Construction drawings and construction must be in line with fire prevention regulations, and accident prevention requirements.
本产品在制造过程中经质量检验，符合施工图纸要求。
The production meets the doucumentation requirement, and passed the quality test during the manufacture procedure.
按照图纸五金表来为每个门提供门用五金，并与本部分要求相符合。
B. Provide door hardware for each door as scheduled on Drawings to comply with requirements in this Section.
审核新产品的图纸，确保图纸符合工艺要求。
Audit the new drawings from designers, and make sure they are complied with the process.
在所有设计图纸提交给客户及施工承包商之前我们要确保图纸的正确性及符合相关设计要求。
Producing and verifying all Design Drawings for compliance & accuracy before distributing to Clients & Contractors for construction is our office practice.
在所有设计图纸提交给客户及施工承包商之前我们要确保图纸的正确性及符合相关设计要求。
Producing and verifying all Design Drawings for compliance & accuracy before distributing to Clients & Contractors for construction is our office practice.
应用推荐