利用干空气射流作用产生真空，使水分吸附至软体泡沫中，并随着射流排到清管器前端。
Vacuum is generated by application of air jetting effect to allow the moisture absorbing to soft foams and discharged along with the jet in front of the pipeline cleaner.
论述了空气射流、浮力尾流和浮力射流的相同、相异性及解法特点，归纳分析了现有实验资料。
Discusses the similarity in solutions of air jet, buoyant plume and buoyant jet, and inducts and analyses the available experiment data.
微磨料空气射流加工（MAJM）技术是对硬脆材料进行微细加工的一种非常有潜力的技术，特别是对复杂的三维微细结构的加工。
Micro Abrasive Jet Machining (MAJM) is a promising technique for micro processing of hard and brittle materials, particularly for machining complicated three - dimensional microstructures.
空气或蒸汽射流截断的纤维。
对水在空气中湍动雾化射流的气液两相流场进行了数值模拟。
Simulation of turbulence atomization jet in the air-water two phase flow field was performed.
助压水罐巧妙的利用自来水管网自身的压力，对水罐内存空气压缩，形成巨大的势能，在冲洗时产生强劲射流。
The pressure assist tank make use of service pipe net self's pressure cleverly, to compress the air accumulated in the tank, formatting gigantic potential energy.
射流搅拌发酵罐是在结合我国实际的基础上提出的一条既能有效利用压缩空气的能量以达到增强氧传递速率又能降低能耗的新途径。
The use of jet stirring fermenter is a new approach to increase the rate of oxygen transferring with decrease the energy consumption, based on the present situation of our country.
在空气环境中利用氩等离子体射流进行材料加工时，环境空气卷吸进入射流可能会引起金属材料氧化。
When materials processing using laminar argon plasma jets is performed in ambient air, the entrainment of air into the jets will lead to the oxidation of processed metallic materials.
采用水-空气系统，研究了液体射流直径对双通道气流式喷嘴雾化性能的影响。
The effect of liquid jet diameter on performance of two-fluid airblast atomizer was investigated in a water-air system.
根据流体力学射流理论，分析了空气幕在综采工作面隔离粉尘的作用，并根据综采工作面应用空气幕隔尘的特点，设计了空气幕。
An air curtain was designed according to the jet theory of fluid mechanics and the role and feature of air curtain to separate dust in a fully mechanized face.
建立气液两相流模型分析射流液滴在空气中的运动形态。
Established a two-phase flow model to analyze the movement patterns of jet droplets in the air.
采用紊流射流理论推出了新的壁面射流计算公式，并在正确描述喷注贯穿的基础上建立了有涡流作用的空气卷吸模型。
The theory of turbulent jet has been employed to induce new formulas for wall jet, and on the base of correct spray penetration, air entrainment model in swirl field has been built.
对工作在大气压下的空气等离子体射流，得出焓探头测量的温度范围在80 0 ~ 70 0 0K左右。
For air plasma jets operating at atmospheric pressure, the range of temperature measurement of the enthalpy probe is 800k to 7000k.
但是，目前传统的射流式真空发生器在工作过程中始终以同一较大的气流流通面积供给压缩空气，存在着空气消耗量大的缺点。
However, the compressed air pass the same large area of Laval nozzle in the traditional vacuum ejector all through the working process, so its large shortcoming is high compressed air consumption.
本文试验在自由射流风洞中进行，利用空气加热器模拟高空飞行条件。
About the experiment, these experiments were conducted in the free stream wind tunnel, and vitiated air heater was used to simulate the high altitude flow condition.
射流微泡发生器是在射流形成的负压作用下将空气吸入，并粉碎成微小气泡。
The jet micro-bubble generator is a equipment which em rains and smashes the air under the negative pressure formed by jet flow, in order to obtain the micro-bubble.
通过两种结构烧嘴的热态燃烧试验对比，研究了烧嘴结构、燃气射流速度、过量空气系数对高温空气燃烧过程氮氧化物排放的影响特性。
The effects of nozzle structure, fuel gas injection velocity and excess air coefficient on NOx emission in high temperature air combustion were investigated.
对同轴旋转射流燃烧器空气动力场进行了可视化实验研究。
A visualization experimental study has been conducted of the aerodynamic field of a co axial swirl jet burner.
本系列空气压缩机广泛用于气动夹固、风动工具、轮胎充气、吹制工艺、喷漆、喷砂、射流元件及共它需要压缩空气的场所。
This series air compressor widely used in pneumatic lock, pneumatictool, t ere en fe inflation, blowing process, spray paint, sand blasting and fluidic element.
运用射流破碎理论，对射流在空气中的运动形式和稳定性进行了分析，分析了射流液滴的破碎方式。
Analyszed the stability and movement form of jet in the air by using the jet fragmentation theory, and studied the jet droplets broken way.
燃气射流与空气流在进气道出口直接撞击不利于燃烧效率的提高。
The impinging jet injection device improves combustion efficiency. If the fuel streams impinge with the airstreams directly at the exit of air-inlet, it makes negative effect on combustion efficiency.
射流感应破裂荷电是一种以静电学、两相流理论及空气动力学理论为基础的能产生超高荷质比带电液滴的新技术。
The droplet size and the charge to mass ratio are measured by developed device of particle charge to mass ratio and reagent of catching fuel droplets.
本系列空气压缩机广泛应用于气动夹固、风动工具、轮胎充气，吹制工艺、喷漆、喷砂、射流元件及其他需要压缩空气的场所。
This series air compressor widely used in pneumatic lock, pneumatic tool, tire inflation, blowing process, spray paint, sand blasting and blasting and fluidic element.
分析水平面与竖直面氧化空气体积分数分布，考察射流对氧化空气的扩散作用。
Analysis of the air volume fraction distribution of oxidation air of horizontal and vertical plane is used to investigate the effect of the rotary jet mixing device diffusing the oxidation air.
分析水平面与竖直面氧化空气体积分数分布，考察射流对氧化空气的扩散作用。
Analysis of the air volume fraction distribution of oxidation air of horizontal and vertical plane is used to investigate the effect of the rotary jet mixing device diffusing the oxidation air.
应用推荐