空心微珠保温冒口是一项先进的铸造工艺。
The hollow fine particle insulating riser is an advanced founding technique.
制备出一种空心微珠增强聚氨酯泡沫复合材料。
One kind of the hollow bead reinforced polyurethane foam composite was prepared.
论述以厚壁空心微珠为基质，研制轻质保温帽。
The paper describes how to manufacture light insulation cap by using thick wall hollow micro ball as the base material.
利用空心微珠球型的特性，填充改性玻纤增强尼龙6。
The glass fiber reinforced nylon 6 was modificated by the filling of the hollow microsphere.
本文论述了在空心微珠表面磁控溅射镀金属薄膜的方法。
High quality nickel films have been successfully plated on cenosphere particles by dc magnetron sputtering at mom temperature.
为粉煤灰空心微珠的分选与综合利用提供了有效的途径。
It provides an effective way for the separation and comprehensive utilization of hollow microbeads.
本文介绍一种以粉煤灰及空心微珠为主要原料制成的烟囱内衬材料。
This paper presents a kind of chimney lining material made from fly ash and cenospheres.
空心微珠经过金属镀层处理后，对可见光、近红外的反射能力都有所下降。
The reflectivity to the visible and near infrared ray will be dropped as cellshpere is plated with metal such as silver and nickle.
利用电沉积技术，在A3钢片上制备了含有微米级空心微珠粒子的镍基复合镀层。
The Nickel micron hollow tiny pearl composite coating on A3 steel substrate was prepared by electrodeposition technique.
具体地导出了单向纡维复合材料和空心微珠复合材料等效导热系数的组分设计公式。
The equivalence heat conduction coefficients of fiber reinforced and hollow sphere filled composite materials would be particularly proposed.
本文用具体数据资料论述采用空心微珠保温冒口给铸钢生产带来的技术-经济效益。
This paper by the real data shows that greater technical and economic benefit can be achieved with this technique in production of steel castings.
利用化学镀镍工艺制备空心微珠基红外低发射率材料，对其表面形貌，并重点对其吸收率、发射率和热辐射能等红外性能进行表征。
Low infrared emissivity materials based on hollow particles are prepared by chemical Ni-coated processing, and surface morphology, absorbance, emissivity and infrared radiant energy are characterized.
研究了柠檬酸盐溶胶-凝胶方法制备空心微珠-钡、锶、钴镍钡铁氧体复合粉体的微观形貌，采用化学添加剂改善铁氧体的包覆性能。
Ferrite-encapsulated cenosphere powders were prepared by citrate sol-gel method. The additive was used to improve the performance of ferrite coating.
为什么要选择高性能空心玻璃微珠？
空心玻璃微珠的填充量一般在5%-20%之间。
The filling content of hollow glass bead generally is between 5% -20%.
空心玻璃微珠极易与树脂混合，一般建议在较慢的搅拌速度下在混合的最后阶段加入空心玻璃微珠。
It can be easily mixed with resin, and is proposed to be added at the final stages of mixing with a slower mixing speed.
空心玻璃微珠的滚动性能好，可提高机械钻速，从而显著提高钻井效率。
Hollow glass microspheres has a good rolling performance, and it can increase the drilling rate, and Significantly improve the drilling efficiency.
研究了在空心玻璃微珠表面化学镀镍磷合金的无钯活化新工艺。
By this activation process, electroless nickel on cenospheres surface was carried out.
本文介绍了空心玻璃微珠的基本性能及其在复合材料中的应用。
This paper introduces the basic properties of hollow glass microspheres and their application in composites.
结果表明，硅烷偶联剂改善了空心玻璃微珠与树脂基体的相容性。
The results showed that the compatibility of hollow glass bead and resin was improved by adding silane coupling agent.
此外，在已有的宏细观力学实验基础上，进一步分析了空心玻璃微珠对复合泡沫塑料的增强机理。
In addition, based on the macroscopic and microscopic experiments, the reinforced mechanism of hollow glass micro-spheres for polyurethane syntactic foams is discussed also.
研究了加入空心玻璃微珠后，硬质聚氨酯泡沫塑料的泡孔结构、压缩性能以及阻尼性能。
The cell structure, compression and damping properties of rigid polyurethane foam filled with hollow glass bead were studied.
研究了空心玻璃微珠增强聚四氟乙烯复合材料的拉伸强度的变化。
The changes of the tensile strength of the PTFE composites reinforced by glass microballoon were studied.
制备了空心玻璃微珠（HGM ）填充环氧树脂复合材料，对材料进行了单轴静态压缩实验。
Uniaxial static compression behavior of composites of epoxy resin (E-51) and hollow glass microspheres (HGM) was investigated.
因此添加不同比例的空心玻璃微珠就能够得到你所想要的理想密度。
Hence the desired ideal density can be obtained by adding appropriate proportions of hollow glass microspheres.
因此添加不同比例的空心玻璃微珠就能够得到你所想要的理想密度。
Hence the desired ideal density can be obtained by adding appropriate proportions of hollow glass microspheres.
应用推荐