获取操作环境的测量数据让开发人员更好的理解操作的性能和稳定性。
Measuring the operational environment provides insight to dev on operational performance and stability.
本例执行了一些不同的测试来检查稳定性并测量与几个常用特性关联的开销。
For the example, different tests were performed to check stability and to measure the overhead associated with several commonly used features. The methodology for each of the tests was similar.
此外，根据抽象性和不稳定性来测量系统平衡将使您不断的了解系统的可维护性。
In addition, measuring your system's balance in terms of abstractness and instability gives you an overview of its maintainability over time.
因此，在不影响测量精度或稳定性的情况下尽可能缩短测试时间是非常重要的。
Therefore, it is important to shorten the test time as much as possible without sacrificing measurement accuracy or stability.
因此，有必要通过对颜色测量相关理论的研究，设计一种具有高精度、高稳定性、强抗干扰且价格低廉的在线颜色测试系统。
Hereby, based on the deep study of the relevant theory of color measurement, an online color measurement system was designed with high precision, good stability, strong anti-jamming, and low cost.
基于该数学模型，优化设计了高可靠性、高稳定性的信号调理电路，并在聚焦元件自动测量系统中得到了实际应用。
Based on this mathematics model, the optimum signal-processing circuit, having high reliability and high stability, is designed and applied to the automatic measurement system of the focusing units.
讨论了这些措施对测量系统的稳定性、漂移、噪声抑制、抗干扰等性能指标的改善。
The improvement of the measuring system performance such as stability, drift, noise-suppression and interference-resistance by adopting these measures has been discussed.
与纯teos敏感膜相比，有机改性敏感膜具有更好的重复使用性和稳定性，更有利于溶解氧的测量。
Compared with pure TEOS sensing membrane, modified sensing membranes have better reproducibility and stability, which is more favorable for the detection of dissolved oxygen.
为了提高光学电压互感器的测量精度，提出了提高其稳定性的方法。
In order to raise the precision of measurement, a method for improving stability of Optical Potential Transformers is proposed in this paper.
其独特的应变设计提供了极好的测量精度和稳定性，以及提供最大限度的过载保护。
Its unique strain-gauge design delivers excellent measurement precision and stability as well as providing maximum overload protection.
在强度调制型光纤传感器中，光源发光强度和光电接收器工作的稳定性，是决定测量精度的关键因素。
In intensity-modulated type optic fiber sensors, luminous intensity of a light source and operating stability of photoelectric receiver are the key factors for determining measuring accuracy.
理论分析和实验结果表明，强度型光纤位移传感系统采用补偿技术之后，其测量精度和稳定性有了明显提高。
Theoretic analysis and experimental result indicate that, the optic fiber displacement sensing system which adopts the compensatory technology obviously increases its measuring accuracy and stability.
数据处理中，采用了去极值平均滤波的数字滤波方法，有效地抑制了随机干扰及脉冲干扰，增加了系统的稳定性，提高了测量精度。
To restrain random interference and pulse interference and improve measurement accuracy and stability, the digital filtering method which average the data crossing the extremum out is adopt.
通过对显示器稳定性的测量，为在对比度敏感测量和色貌模型、图像质量、图像感知模型评价等研究领域中用显示器进行实验研究奠定了基础。
Based on the measurement of stability, it makes a good foundation for experimental research measuring contrast sensitivity and estimating color appearance, image quality and image perception on CRT.
利用共模抑制技术，提高了干涉系统的测量稳定性和重复性。
The measurement stability and repetitiveness of the laser interferometer is improved by means of convenient mode inhibiting technique.
在单片机中计算压力值，并进行数字补偿，经rs485接口输出，具有稳定性好、误差小、测量精度高等特点。
The pressure reading have characteristic of small deviation, excellent value precision, good stability and can communication with master computer through RS485 interface.
介绍了GR- 660车载伽玛能谱测量系统，对仪器的稳定性和重复性进行了实验分析。
This article introduces GR-660 car gamma-ray spectral survey system and analyzes the apparatuss stability and repeatability through experiment.
对激光自混合干涉仪的系统稳定性与测量分辨力进行了实验研究，给出了改善系统稳定性与测量分辨力的有效方法。
The system stability and measurement resolution are experimentally studied, and the method for improving system stability and measurement resolution is given.
另外在加速器物理实验以及在研究各种束流不稳定性的机器研究过程中，都需要频谱测量和频谱分析。
In addition, it required to measure and analyze the beam spectrum while the experiments of accelerator physics and study on the beam instability are made.
用所研制的测量装置对自制的连续波染料激光频率的线宽和频率稳定性进行了测量。
With this new developed apparatus, we have measured the linewidth and frequency stability of our home made CW ring dye laser.
实践证明，这种非线性数字滤波器不仅简便易行，而且提高了测量系统的测量精度和稳定性。
It is proved in practice that not only it is simple and easy to do, but also it raises the precision and stability of the measurement.
当前采用高速CCD器件和图像处理技术在普通实验室就可以进行指向稳定性的精密测量。
It can be measured precisely in general laboratories by image processing techniques and high speed CCD sensor so far.
对不同未知样本进行了预测，结果表明，所建模型具有一定的稳定性，对未知样品蛋白质浓度的测量偏差较小，其最大偏差不超过1.0。
The model is good by predicting protein concentration of wheat flour with different unknown sample groups. Its error is less than 1 0.
该方法采用AD515A和一个积分电容构成基本测量电路，不仅提高了测量的稳定性而且使其校准和调整更加方便。
The basic measuring circuit of this method includes the AD515A and a integral capacity, it not only enhances the measuring stability but also makes the calibration and the adjustment more convenient.
该方法采用AD515A和一个积分电容构成基本测量电路，不仅提高了测量的稳定性而且使其校准和调整更加方便。
The basic measuring circuit of this method includes the AD515A and a integral capacity, it not only enhances the measuring stability but also makes the calibration and the adjustment more convenient.
应用推荐