位于弗吉尼亚海滩的眼镜蛇军犬训练营的主人， 杰夫-富兰克林说, “军犬不能用镶满一口钛合金牙齿，使它们看上去更加威猛凶悍。 他们不像普通牙齿那样稳定，而且它们在咀嚼时，更容易被呲出来”。
“They’re not as stable as a regular tooth would be, and they’re much more likely to come out” during a biting.
广泛的规格标准类型s包括17吋合金、车辆稳定性协助(VSA)、空调、冷却盒、远程音频控制和侧窗帘安全气囊。
The extensive specification of the standard TYPE s includes 17 inch alloys, Vehicle Stability Assist (VSA), air conditioning, cool box, remote audio controls and side curtain airbags.
当腐蚀浸泡的时间大于120分钟后，腐蚀产物在铝合金表面产生了明显的位阻作用，从而使腐蚀速率逐渐下降，直至48小时后，腐蚀速率趋于一相对稳定的数值。
Because of the place obstruction of corrosion products in the surface of the alloys, while corrosion time is at 120 minutes above, the corrosion rate descends to the stable value in 48 hours.
合金有极好的温度稳定性。
后来我们使用了这个星球上一类热稳定性最高的材料——因瓦合金(一种镍铁合金)制作镜框。
And then, by going with this open frame, we use invar [a nickel-iron alloy], one of the most thermally stable materials on the planet.
计量泵：采用优质合金钢材米泵保证稳定的熔融压力和流量。
Meter pump: The meter pump with excellent quality alloy steel guarantees stable melting pressure and flow.
本文简要介绍锡铈镍合金电镀工艺。本工艺镀液稳定，电镀层质量好。
This text simply introduce the technology for Sn-Ce-Ni alloy electroplating. Plating solution is stable. Coat quality is good.
因此，对形状记忆合金进行系统和深入的研究仍旧是必要的，特别是在增加形状记忆合金的带宽，疲劳寿命和稳定性方面。
Therefore, much systematic and intensive research work is still needed to enhance the performance of SMAs, especially to increase their bandwidth, fatigue life and stability.
合金钢车身，稳定性更高，任凭摔打不易损坏。
Alloy steel body, higher stability, let the beat is not easy to damage.
结果表明，镀镍能明显提高低钴贮氢合金的放电容量、1c高倍率放电性能及循环稳定性，对活化性能亦有改善。
The results showed that the electroless nickel plating could increase the discharge capacity, 1c discharge properties and cycle stability obviously, and could also improve the activation.
同轴喷嘴设计的关键问题在于如何获得稳定均匀的同轴气流，使气流在控制等离子体的同时，又能为钛合金高温熔池提供保护。
The key point of designing coaxial nozzle is how to acquire the steady airstream, which can be used to control the plasma and protect the molten pool at high temperature at the same time.
结果表明，合适的快淬速度不仅可以大幅度的提高放电容量，而且明显的改善合金的循环稳定性和放电电压特性。
The results show that proper quenching not only increase discharge capacity greatly but also can improve cycle stability and discharge voltage property.
国产氩气雾化粉末经热等静压或再经锻造的FGH95合金也出现多种夹杂，影响力学性能稳定。
The domestic alloy FGH95 made from argon atomized powder, then consolidated by HIP with or without forging, also contains various kinds of inclusions affecting the stability of mechanical properties.
研究表明所研制的感温合金性能是稳定、可靠的。
It has been proved that the properties of the heat-sensitive alloys prepared by us are stable and reliable.
非晶合金的稳定性是制备大块非晶合金的关键，而弛豫后形成的短程有序结构对非晶中的晶体相形核有重要的影响。
Stability of an amorphous alloy is a key for synthesizing bulk amorphous alloy, short range order formed after relaxation has important influence on nucleation of crystalline phase in amorphous.
采用热轧后温轧或中间退火后冷轧，再在一定温度下进行稳定化退火的工艺，可以获得综合性能良好的铝-镁-钪合金冷轧板材。
By warm rolling after hot rolling or cold rolling after annealing in process and stabilizing annealing in some temperature condition, the c.
根据不同的挤压比，研究了不同变形量非晶合金的热稳定性情况。
Based on the various extrusion rate, the thermal stability of the bulky metallic glass with different deformation was studied.
采用硫酸铜、硫酸亚锡为主盐，加入络合剂、光亮剂、锡盐稳定剂，研究成功了一种新的浸镀铜锡合金工艺。
A new immersion plating process was developed in which copper sulfate and stannous sulfate were used as main salt, with addition of complex, brightener and stabilizer to tin salt.
利用箱式电阻炉、自行研制的高精度程序控制深冷箱对比，研究了热处理工艺和深冷处理工艺对2a11铝合金样品尺寸稳定性的影响。
The effects of heat treatment and cryogenic treatment on dimensional stability of al alloy 2a11 were studied using a box-type electrical resistance furnace and a cryogenic box with program control.
研究了浇注温度、拉坯速度、倾斜板长度和倾斜角度对倾斜冷却半固态连铸a356铝合金过程稳定性的影响。
Influences of casting temperature, casting speed, length and Angle of inclined cooling plate on the stability of semisolid continuous casting for A356 alloy by inclined cooling were studied.
本文采用试验研究与理论分析相结合的方法，对某折叠式帐篷结构中的轴心受压铝合金圆管构件的受压稳定承载力进行了研究分析。
In this paper, by using the method of experiment researching and theory analysis, the stability of the axially loaded aluminum alloy pipe in structure of the folding tent was studied.
通过试验，摸索出1 J 79合金的最佳热处理工艺，获得了磁性温度稳定性较好的1j79合金。
Through testing, the optimum heat treatment and better thermal stability of magnetic properties of 1j79 alloy have been obtained.
有关研究表明，合金组成、催化剂载体以及大环配合物对阳极催化剂的催化活性和稳定性有着直接的影响。
It is demonstrated that the composition of alloy, type of carrier, and large ring coordinate compounds are directly linked to activity and stability of anode catalysts.
利用XRD和DSC等手段对该合金的形成能力及热稳定性进行了分析。
The glass forming ability and the thermal stability were also investigated by differential scanning calorimetry(DSC)and X-Ray diffraction(XRD).
电化学测试表明，快速凝固处理后合金的活化性能不变，循环稳定性得到显著改善，但其放电容量和高倍率放电性能有所降低。
The electrochemical tests indicated that the melt-spun alloys showed a good activation property and much better cycling stability, but lower discharge capacity and high-rate dischargeability.
本文旨在研究铝合金轴心受压构件的稳定性能。
The thesis aims at studying stability of aluminum alloy axial compression members.
对于铝合金检具变形引起的尺寸不稳定，给予规范的热处理和粘接装配，使发动机缸体用检具本体变形得到控制。
The dimension instability is caused by aluminium alloy deformation. The methods such as heat treatment and assembly to control the inspection device deformation are put forward.
对于铝合金检具变形引起的尺寸不稳定，给予规范的热处理和粘接装配，使发动机缸体用检具本体变形得到控制。
The dimension instability is caused by aluminium alloy deformation. The methods such as heat treatment and assembly to control the inspection device deformation are put forward.
应用推荐