这项学程的宗旨是提供工程方法学与金融定量分析方法的训练。
It is designed to provide training in the application of engineering methodologies and quantitative methods to finance.
在此基础上，应用非线性时程方法研究了纵向地震作用下连续梁桥相邻联的非同向振动和伸缩缝处的碰撞效应。
This model was used to investigate the out-of-phase vibrations and pounding effects of adjacent girders at expansion joints by the nonlinear time-history analysis method.
由于纤程比完全线程更轻量级，而且你无需担心抢占问题，因此他的方法很有优势。
His approach has some advantages since Fibers are lighter-weight than full threads and you don't need to worry about preemption.
程明认为有些选修课真的很“鸡肋”——你必须去上课但它们对未来几乎没有用处，于是他决定试一试这个方法。
Cheng was thinking that some electives were just "chicken ribs" -you have to take them but they're hardly useful for the future -so he decided to give this method a shot.
在本导游的最后一程，将介绍JAAS认证模型中的一个矛盾，并且我将描述一个解决它的实际方法。
In this final leg of the tour, you'll learn about a discrepancy in the JAAS authorization model and I'll describe a practical method for addressing it.
本文所提出的卜程图纸管理系统的构建模式与实现方法，对同类系统的设计有一定的借鉴作用。
In this thesis, we presented the building model and implementation method has some references to the designing work of similar system.
对于抗震分析方法的研究主要围绕时程分析法和随机振动分析法。
Research work of seismic analysis methods is focused on time history method and stochastic vibration method.
在程潮铁矿的应用表明，该研究方法和相应程序是可靠的。
After applying to Chengchao Iron Mine, it proves that the studying method with corresponding program is reliable.
脉冲激光测距机最大测程测试方法研究。
Novel method for maximum range measure of pulse laser range finder.
传入一个动作，函数，方法或协程。
傅立叶方法是解这一方程的有效方法。
Fourier method is an effective method of solving this equation.
给出了楼板加速度时程的模拟方法。
The method of modeling floor acceleration processes is presented.
本文叙述如何在某一特定的车床上加大导程的方法及提高导枉设计精度的措施。
This paper describes the method to increase the lead on a specific lathe and the measures to improve the lead design accuracy.
前言：目的对分程控制系统中调节阀分程特性的确定方法进行改进，提供一种简捷的确定方法。
Objective: To improve definite method of control valve split-ranging characteristic in split-ranging control system and provide an easy method for Determination.
本文采用地震反应谱分析和时程分析方法，分析了主体和高位连接体结构的动力特性及结构变形特点。
By using seismic response spectrum and time history analysis method, the structure dynamic characteristics and deformation properties of the main building and connected structure were analyzed.
本文采用地震反应谱分析和时程分析方法，分析了主体和高位连接体结构的动力特性，结构变形特点。
By using seismic response spectrum and time history analysis method, the structure dynamic characteristics and deformation properties of main - building and connected structure are analyzed.
在此基础上，提出了高层建筑钢结构抗震设计第二阶段安全检验的弹塑性时程分析实用方法建议。
A practical procedure of elastoplastic time history analysis safety check during the second stage of the aseismic design for steel structure is also suggested.
同时用时程分析方法，计算分析了T型、L型平面非规则布置房屋结构的扭转和局部变形的关系。
Meanwhile, by temporal analysis method, the author calculates the relationship between T-type and L-type torsion and local deformation of plane irregular house structure arrangement.
运用时程分析方法，分析小湾饮水沟堆积体边坡在爆破荷载作用下的动力稳定性。
The dynamic stability of a slope in Xiaowan hydropower station is studied under the blasting load with the dynamic FEM.
利用慢变参数、时程分析和能量分析方法，探讨了铅芯橡胶减震支座（LRB） 的非线性动力性态。
Slowly parameter, nonlinear time response analysis and energy approach can be used to obtain the dynamic behavior of lead rubber bearing (LRB).
介绍采用数字信号处理的超声端点反射回波声程测量裂纹高度的方法研究和结果。
The measurement of crack height by ultrasonic edge peak echo method and digital signal processing was described, and the results were given.
分析现有几种凸轮升程误差测量方法的优、缺点后，提出一种基于图像处理的凸轮升程误差的非接触式测量新方法。
After analysing the advantages and disadvantages of the measuring methods for the raising error of the CAM curves in existence, this article puts forward a new non-contact measuring method.
采用神经网络(ANN)方法对沿程水头损失系数的影响因素进行了分析。
Influential factors of friction factor of head loss are analyzed by adopting artificial neural network (ANN).
最后采用弹塑性时程分析方法对简化的层模型结构进行了时程分析。
Finally, the elastoplastic time-history analysis is carried out for the structure using a simplified story model.
采用反应谱法，时程分析方法以及随机振动方法分析了拱桥在一维和多维地震激励下的地震响应。
Through spectrum analysis, time-marching analysis and radom vibration analysis, the seismic performance of arch bridge under one-dimension and multi-dimension excitation has been analyzed.
本文介绍了异程空调水系统的设计、调试方法和在异程空调水系统中应用较多的自力式平衡阀的特性。
The design and application of direct-return system water system of air-conditioning system, and the characteristics of self-balancing control valve are discussed.
几十年来，先后诞生了拟静力方法、反应谱方法、时程分析方法、基于性能的设计方法等抗震设计方法。
For the recent decades, the pseudo static method, the response-spectrum analysis, time-history analysis, performance-based design method, spring out early or later.
针对采用非设计要求测头进行凸轮测量所引发的当量转角—升程的求解方法问题进行了分析。
It analyses the method for derivation of equivalent angle-lift resulted in measuring the CAM with non-design required probe.
针对采用非设计要求测头进行凸轮测量所引发的当量转角—升程的求解方法问题进行了分析。
It analyses the method for derivation of equivalent angle-lift resulted in measuring the CAM with non-design required probe.
应用推荐