提出了利用动态热电偶测得的齿面闪温分布曲线计算齿面积分温度的方法。
The method of calculating integral temperature by measured flash temperature curve was put forward.
我们可以做温度的积分。
如果你希望温度有一个有限的变化，现在你需要做的就是积分。
So if you want to do a finite temperature change, now what you need to do is, you need to integrate.
一般cp和，都是温度的函数，因此实际上，我们可以将这个积分计算出来。
Cv So, for Cp and Cv, these are often quantities that are measured as a function of temperature, and one could, in fact, calculate this integral.
理想气体常数不变，温度也不变，因此,是负的nRT，积分从v1到v2，dv除以。
The ideal gas constant doesn't change, temperature doesn't change, and so v we just have minus nRT integral V1, V2, dV over V.
这与温度有一点点关系,这是积分形式的范特霍夫方程。
dT And this could be slightly temperature dependent. dT And this is the integrated van 't Hoff equation.
忽略它对温度的依赖关系，把它从积分里提出来。
Ignore the temperature dependence and take it outside of the integral.
用积分本征模方程研究了在托卡马克等离子体中包含全部动力学效应的动力剪切阿尔芬波模（无论是否存在温度梯度） 。
Kinetic shear Alfvn modes in tokamak plasmas (with or without temperature gradient) in the full gyrokinetic limit are numerically investigated by using the integral eigenvalue equations.
设计了一种带有积分参数的模糊控制器，并将其应用于电阻炉的温度控制系统。
A fuzzy controller with integral parameter is designed, and applies it to the temperature control system of resistance furnace.
吸附平衡常数具有热力学性质，从不同温度的吸附平衡常数可以得到积分吸附热。
Adsorption equilibrium constant has thermodynamic properties. The integral adsorption heat can be acquired from the adsorption equilibrium constants at different temperatures.
采用数值积分法，根据储罐容积、液化石油气质量、组成、环境温度等条件计算其气化参数。
Its vaporization parameters are calculated with the method of digital integration based on volumes of tank, mass and composition of LPG, ambient temperature and other conditions.
本文就工业窑炉微机温度控制引入积分分离式的PID调节进行了分析研究；
The authors have developed the micro-computer temperature controlling system for industrial kilns in which the PID regulation by integral splitting is introduced.
通过积分变换方法，求解热传导和热弹性力学方程组，由此得到激光辐照引起的温度场和热应力场的瞬态分布。
The equations of heat conduction and thermoelastic dynamics are solved through integral-transform method. Transient distribution of temperature field and thermal stress field is described.
讨论了与冰晶体压力相关的相变温度变化对空间离散系统数值积分和应力计算的影响。
The paper also deals with the influence of pressure variety of ice crystal on temporal integral step-length and calculation of stress-field.
本文采用直接边界元法，研究了土的弹塑性、粘塑性（含蠕变）及温度应力等非弹性状的边界积分方程求解摸式。
With direct B. E. M. the boundary integral equations of soil for elastoplasticity, viscoplasticity cluding creep and temperature stress are researched and soluted.
就工业窑炉微机温度控制对积分分离式的PID调节、数字滤波算法、参数自适应算法进行了分析研究，通过调试，根据分析已完全符合预定要求，有很重要的实用价。
The microcomputer temperature control system for industrial kilns in which the PID regulation with integral split, numerical filtration algorithm, parameters adaption algorithm is introduced.
它的主要任务是对组合气缸、压力容器、旋转构件进行COD理论和J积分理论的评定，以及对大型铸锻构件进行断口形貌转变温度FATT的评定。
The main task of the system is to assess assembled vats, pressure vessels and rotation components by using COD and J-integral theory, and to assess large casting and forging components by FATT theory.
利用模式搜索法求取了一个新的温度积分近似式，给出了相应的估算动力学参数的方程。
A new approximation for temperature integral is proposed by using pattern search method. The corresponding equation for the evaluation of kinetic parameters has also been obtained.
采用压力温度法测量氢气消耗量，对蓄电池电压、电流进行连续测量和积分运算得到电能量消耗。
Pressure and temperature method is assumed to measure hydrogen consumption, Battery voltage and current is continuously measured and integrated to calculate electric energy consumption.
并对影响电流变液电流变效应的其它因素如聚苯胺粒子大小、形状，体积分数，外加电场强度，剪切速率，外界温度等进行了实验分析。
Other factors of influencing er effect such as size and shape of particle, volume fraction, electric field strength, shear rate, temperature are discussed.
采用一种简单的数值积分动态建模方法建立了大惯性温度传感器的数学模型。
A model of temperature sensors with a great inertia is set up by means of a simple numerical integral method.
捕捉到这一附加值，积分必须从提高工作频率宽禁带(WBG)设备和温度的全部优点。
To capture this added value, an integrator must get the full benefit from the increased operating frequency and temperature of wide-bandgap (WBG) devices.
在含氧体积分数为36%以内提高空气预热温度和含氧浓度，可明显地提高热效率，降低钢坯的氧化烧损。
Under oxygen concentration 36% the higher air temperature and the higher oxygen concentration are, the higher heat efficiency is and the less oxidation loss is obviously.
再利用围道积分对其进行逆变化，得到无量纲渗漏水温度及地层温度解析解。
The dimensionless of the leakage water temperature and the stratum temperature in real Spaces were obtained by the contour integration method.
首先建立了考虑温度及离心载荷的双重边界积分方程组，并对边界积分方程组的选取及适用范围进行了讨论。
First, dual boundary integral equations with temperature and centrifugal loads are set up in the paper. Then, the strategy to use those equations is discussed.
用路径积分方法得到了有限温度下多维量子裂变速率的表达式。
The expression of quantum correction of the multidimensional fission rate at finite temperature is obtained by a path integral method.
随着变形温度的降低、变形程度和变形速率的增大，再结晶晶粒尺寸减小，再结晶体积分数增大。
With the decreases of deformation temperature and increases of deformation degree and deformation rate, the recrystallized grain size decreases and the recrystallization volume percent increases.
研究了乳化剂种类和用量、水相体积分数、温度、搅拌速率等因素对超浓反相乳液聚合的影响。
The stability was affected by kinds and dose of emulsifier, volume fraction of water phase, temperature and velocity of stir.
利用得到的参数可计算玻璃中自由体积分数随温度的变化情况，并可计算得到的粘度变化速率。
The temperature dependence of the free volumes fraction and the rate of viscosity change can be calculated according to the obtained parameters.
利用得到的参数可计算玻璃中自由体积分数随温度的变化情况，并可计算得到的粘度变化速率。
The temperature dependence of the free volumes fraction and the rate of viscosity change can be calculated according to the obtained parameters.
应用推荐