控制系统的集成化为足式机器人的离线控制奠定了基础。
The integration of control system lays the foundation for quadruped robot remote control.
并以离线控制试验为实例，考核该系统识别刀具状态的可靠性。
Taking off-line control test for example, the reliability of cutting tool condition identification of this monitoring system has been assessed.
所有大门控制器不断连接中央服务器，并且任何的离线控制器会通过电子邮件提醒管理员。
All door controllers are in continual contact with the central server, and any offline controller alerts the manager via email.
离线策略控制备份和恢复命令，以及数据库备份映像的加密和解密。
The offline policy controls backup and restore commands, and the encryption and decryption of database backup images.
采用计时器电路按照规定的时间间隔控制在线和离线塔的开关，从而使空气干燥和干燥剂再生可连续进行。
The timer circuits in accordance with the prescribed time interval control online and offline tower, thus make the switch of dry air and desiccant can continuously regeneration.
文章前面部分仿真分析通过的各种交通流情况下的基于粗集理论的模糊控制方案表在系统中离线给出，以根据实时的交通流数据查表调用。
The System may adjust the control schemes by real time traffic data, which are off-line provided by the fuzzy traffic Decision table based on Rough Sets.
万一正在使用的控制器离线，无线电系统则可自动启用备用控制器。
The radio system supports automatic switchover to the stand-by controller if the active one goes off-line.
调度人员根据经验、以前的运行实践，以及离线的潮流计算来控制母线电压。 收藏。
The dispatcher controls these voltages based on experience, previous operating practices, and off-line load flow studies.
文中分析研究了系统自诊断和现场控制站自诊断，对离线测试、目标测试进行了具体阐述。
This paper studies and analyses the self-diagnose of system and field control station. The principle of offline test and target test are given out.
模糊控制算法基于离线计算和在线查询的方式，采用指针寻址查表方法。
Fuzzy control algorithm bases on the mode of calculation offline and inquire online, and takes the method of using the cursor to address the form.
该算法将控制算法分为两个部分，离线部分和在线部分。
Such an algorithm divided the control algorithm into two parts: offline part and online part.
电磁阀接收电控柜信号，控制气缸动作，实现冷风、卸灰、离线清灰引、返吹风转换等自动化过程。
The solenoid valve cabinet receives the signal, control the movement of the cylinder to achieve air cooling, discharging and off-line cleaning, lead conversion process automation back blowing.
首先研究了离线训练的滑模控制器，然后，给出了利用梯度下降法的在线训练方法。
First, a study of a sliding mode controller under on off training is made and then the on line learning algorithm using a gradient decent method is designed.
详细介绍了感应电动机矢量控制系统电机参数的一种离线辨识技术。
An off-line parameter estimation technique to determine the parameters, which are necessary to implement the vector control of the induction machine, is presented in this paper.
通过控制表实现计算机模糊控制，可以降低对计算机内存容量和速度的要求，控制表根据人们对控制对象的认识和操作经验确定的模糊控制规则离线处理。
Computer fuzzy control with control table may reduce the level of memory size and computing speed. Control table can be off-line gained by fuzzy rules.
您可以建立资料库物件和设定的离线表示并进行版本控制，来管理资料库的变更。
You can manage changes to a database by creating an offline representation of its objects and Settings, and putting that representation under version control.
本文介绍了神经元网络在控制系统故障诊断中的应用，讨论了神经元网络用于控制系统故障的离线诊断与在线诊断。
In this paper, the application of neural network is presented in the control system fault diagnosis. The method of on-line and off-line fault diagnosis are given.
另外一个方面，离线仿真也是对控制系统的自适应和自学习的一个有益的补充，有利于控制系统的优化。
Another, Off-line Simulation is supplement of self_learning and adaptive in control system, it is propitious to optimization of control system.
PC机主要负责有关参数设定、刀具半径补偿的离线运算、被加工工件图形的可视化以及实现本地控制等功能。
PC sets the parameters, executes the milling cutter radius compensation, draws the graphics of the work-piece machined and realizes local control.
目前稳定控制装置主要是应用简化的判据，或采用查询离线计算策略表方法构成的局部稳定控制。
At present, predigested criterions, or local stabilization controls with the Cure Table accounted offline, are applied to stability control facility.
控制系统网络对PLC控制器具有网络在线编程和系统离线编程的功能。
The control system network is capable of network online programming and system offline programming on the PLC controllers.
根据离线处理的实验结果，我们设计了一模糊控制器，开发了垂直角焊缝的实时自动跟踪软件。
On the basis of experiment results processed offline, a fuzzy controller and software used in real time seam tracking of vertical fillet joint is designed.
不论熔透控制还是焊缝跟踪，都需要实时或离线提取焊接熔池正面或反面的几何参数。
It is necessary to extract molten pool geometrical parameters in real time or to extract back bead width off-line either in seam tracking or in penetration control.
提出一种面向城域单交叉路口的自适应分级模糊控制系统，采用进化策略对分级模糊控制器的模糊隶属度函数进行离线优化调整。
A hierarchical adaptive fuzzy control system for an isolated urban traffic intersection is proposed, and an evolution strategy is used to modify the fuzzy membership functions of the system.
基于智能运动控制器的二次插补算法可分成两次运算，即采取离线粗插补和实时精插补完成。
The two interpolate algorithm based on intelligent motion controller can be partitioned into two times algorithm, viz. first interpolate in offline and second interpolate on real time.
安全稳定控制系统的离线决策表需要输入到控制系统中，并由控制系统根据实际运行情况传送到相应的执行机构执行。
The offline Cure Table must be inputted to the controllable system, and be transmitted to the executive equipment by the program according to the actual things.
离线设计单个串级PID控制算法并给出了稳定参数选择方法，并由此建立多控制器磁悬浮耦合系统模型。
The cascade PID controller was designed off-line, and how to choose the stable control parameters was introduced. Then the whole multi-controller maglev coupling system model was given.
模糊控制器采用离线计算、在线查询决策表的方法实现，易于工程实现。
Fuzzy controller is implemented by way of out-line computing and on-line controlling because this method can be easily realized in a project.
模糊控制器采用离线计算、在线查询决策表的方法实现，易于工程实现。
Fuzzy controller is implemented by way of out-line computing and on-line controlling because this method can be easily realized in a project.
应用推荐