在金属表面采用先进的离子电镀技术替代了传统的镀膜方法，使得镀层颜色更均匀，更稳定，不易脱落。
In metal ion plating surface adopts advanced technology instead of the traditional method, the coating, coating color more even more stable, fall off.
测定了他们的电化学窗口和电导率，为下一步离子液体在电解活泼金属和电镀领域的应用奠定了基础。
Their electric conductivity and electrochemical window, which play an important role in the applications of ionic liquids to electrodeposition and electroplating of active metals, are determined.
不同之处在于，电镀时沉积金属离子，电泳时沉积有机树脂分子。
They differ, however, because electroplating deposits metallic ions whereas electrocoating deposits organic resin molecules.
介绍了用离子交换蒸浓法处理电镀含铬废水的工艺流程特点及处理效果。
The feature of ion exchange vaporization-concentration process used to dispose wastewater produced by electroplating, as well as running effects are introduced.
镉离子主要来源于电镀、电池、合金制造、颜料、采矿与选矿行业排放的工业废水。
Cadmium ion mainly comes from industrial waste water discharged by electroplating, battery, alloy manufacturing, pigment, mining and refining process.
其次是黑色镀层，探讨了目前较受欢迎的电镀黑色锡镍合金及离子镀碳化钛。
Then, black Sn-Ni alloy plating and ti carbide ion plating, quite well received currently, are discussed.
离子交换法处理电镀混合废水是一种较为实用的回用技术。
Ion exchange is one of practical measures to treat electro-plating wastewater for reuse.
在电镀过程中，镀液主盐离子浓度的变化对镀层的影响极大，对合金电镀更是如此。
The variation of concentration of main salt in electrolyte affects the quality of metal coating obviously, and it is for alloy plating coating as well.
测试了锂离子蓄电池电镀锡阳极在不同充电（合金化）状态和不同充放电循环次数后的电化学阻抗谱。
The impedance spectrum of the electroplating tin anode for Li-ion batteries is measured at various states of charge(alloying)and after charge-discharge cycles.
电镀药水：含有欲镀金属离子的电镀药水。
Pilot line chemicals: contain of ions to gold-plated plating potions.
定制的双通道反渗透系统——取代现有的自动电镀脱离子剂。
Custom Built Dual Pass Reverse Osmosis System - Replaced existing automatic deionizer for plating operation.
第一层包覆所述金属芯的外表面，并且通过从包含铜离子的第一浴中电镀铜或铜合金产生。
The first layer encases the eternal surfaces of the metallic core and is produced by electroplating copper or copper alloy from a first bath containing copper ions.
针对其处理工艺流程、运转条件及离子交换法的优点与问题进行了讨论，并介绍了国外最近提出的电镀用水水质要求。
The process, operating condition and excellences of this process are discussed and also the requirements on water quality of electro plating are added.
在电镀溶液中使用连二硫酸和连二硫酸金属盐作为可溶性金属离子和电解质的来源具有潜在的应用。
Dithionic acid and metal dithionate salts are potentially useful sources of soluble metal ions and electrolytes for electroplating solutions.
采用电镀法在铜箔上制得了金属锡电极，用作锂离子蓄电池阳极材料进行了电化学测试。
The metal tin electrodeposited on cupper foil was used as anode material of lithium-ion batteries.
本文报道一个测定镍电镀厂废水中磷酸盐、亚磷酸盐的离子色谱测定法。
In this paper, an ion - exchange HPLC method for the separation and determination of phosphate and phosphite in waste water of electrodes plating of nickel had been built up.
指出了等离子体表面技术可以作为替代电镀制备凹印版材的耐磨层的新工艺。
The plasma surface engineering technology as a new processing of preparation of wearable layer of gravure printing can as a substitute for plating was pointed out.
电镀时，镀层金属做阳极，被氧化成阳离子进入电镀液；
Electroplating, coating metal anode, was oxidized to cationic into plating solution;
之后，利用氨气等离子体促进化学气相沉积法对上述经电镀制程而形成的电镀金属层进行退火处理。
Finally, annealing process is carried out in the electroplated metal layer formed by the electroplating process through chemical vapor deposition method under promotion of ammonia plasma.
在无电镀镍浴中因次磷酸根氧化而产生的亚磷酸根离子，可以通过碱金属或碱土金属阳离子如钙的沉淀作用而去除。
Orthophosphite ions produced by oxidation of hypophosphite in an electroless nickel plating bath can be removed by precipitation with an alkali metal or alkaline earth metal cation such as calcium.
途：本品系阴离子氟表面活性剂，主要用作电镀中铬雾抑制剂、润湿剂、氟蛋白型泡沫灭火剂的添加剂。
Uses: This product is a kind of perfluoro anion surfactant which mainly used as chrome-fog depressant and wetter in field of electroplating and additive in fluarbasin foamite.
途：本品系阴离子氟表面活性剂，主要用作电镀中铬雾抑制剂、润湿剂、氟蛋白型泡沫灭火剂的添加剂。
Uses: This product is a kind of perfluoro anion surfactant which mainly used as chrome-fog depressant and wetter in field of electroplating and additive in fluarbasin foamite.
应用推荐