本文介绍钛材离子氮化工艺对其组织结构和性能的影响。
Effect of ion nitriding process for titanium materials on its microstructure and properties have been studied.
介绍了辉光离子氮化炉的工作原理、改造方案及效果等。
Described in the paper are the working principle, technical modification solution and modification result of the grow plasma nitriding furnace.
本文对辉光离子氮化的设备、工艺原理和生产应用作了简单的介绍。
This paper gives a brief account of glow ion-nitriding-equipment, fundamentals and application.
本文介绍了磨损粒子分析在研究特殊因素(如离子氮化温度)对轴承失效的影响中的应用。
This paper presents the application of wear particle analysis to the study of the effect of a particular factor (e. g. ionitriding temperature) on bearing failure.
灰口铸铁、球墨铸铁的辉光离子氮化质量较难保证，其根本原因在于氮化前工件清洗不当。
It is difficult to warrant the quality of glow-ion nitriding to grey cast iron and ductile cast iron. The basic reason is that the iron can't be washed clearly before nitriding.
最近几年，作者企图提高奥氏体不锈钢离子氮化的耐腐蚀性能，以获得既耐磨又耐腐蚀的表面。
Attempts have thus been made in recent years to improve the corrosion behaviour of plasma nitrided austenitic stainless steels so as to achieve combined wear and corrosion resistant surfaces.
发现钛经过等离子氮化后具有良好的组织相容性，形成薄的血管化的组织反应层，且细胞反应良好。
It is discovered that commercial pure titanium has good biocompatibility after plasma nitriding, the formed blood vascularized tissue reaction layer is thin and cell reaction is good.
合理选择离子氮化温度、气氛氮势和处理时间，能有效控制钛材氮化层中的化合物相的种类和相对含量。
The kind and relative content of nitrides in nitrided layer can be effectively controlled through appropriate selection of technological parameters.
通过改造现有辉光离子氮化炉及工艺试验，扩大离子氮化的氮化范围，解决离子氮化后的氧化及变形问题。
By remaking now available glow ion nitrogen furnace and technological test, the range of ion nitrogen is enlarged, the questions of oxide and being out of shape are solved.
本文在离子氮化装置及离子氮化工艺试验研究的基础上，根据气体放电理论，提出并讨论了双层辉光放电现象。
In this article, double layer glow discharge is discussed in terms of the theory of gas discharge and experiments on ion nitriding equipment and technology.
采用金相组织分析、显微硬度测试以及普通辉光离子氮化炉等方法和设备 ，研究经不同方式预处理的氨气对离子氮化速度和氮化层组织的影响。
The structure and property of 40Cr steel ion?nitrided layer in the different nitrided atmosphere were investigated by means of Ion Microprobe, XRD, Microscope Analysis and so on.
该设备采用氮化钛表面掺金技术，形成离子金膜层，耐磨性非常好，广泛用于各种高档装饰膜层。
This equipment adopts the titanium nitride metal mixing techs forming ion gold membrane with good abrasion resistance, therefore it fits for various top-grade decorating membrane.
考察了淡水和海水在离子镀铬、氮化钛和化学处理水平铝管外表面的降膜传热热性。
Seawater falling film evaporation heat transfer and anti-fouling characteristics were investigated on ion-plated chromium, TiN and chemically treated aluminum tubes.
LDMC系列离子渗氮(氮化)设备由LD、LDMC系统电源和真空炉体构成。
LD, LDMC series Ion nitrogen (NOx) equipment from the LD, LDMC system power vacuum furnace and pose.
过渡金属氮化物是一类金属间充型化合物，兼具有共价化合物、离子晶体和过渡金属的性质。
Transition metal nitrides belong to a class of interstitial compounds, have the properties of covalence compound, ion crystal and transitional metals.
主要阐述了采用自制新型水介质等离子弧设备对氮化硅陶瓷材料进行加热辅助切削的试验条件及过程。
This paper introduces the experiment condition and process to carry out hot cutting on silicon nitride ceramics materials with new self-made water-plasma arc equipment.
先沉积氮化硅薄膜再氢等离子体处理能得到更好的钝化效果。
Depositing SiNx thin film followed by hydrogen plasma treatment will result in better passivation effect.
采用直流电弧等离子体蒸发-凝聚法制备了高纯氮化铝(ain)纳米粉末。
Nanosize aluminium nitride (AIN) powder was prepared by evaporating and nitriding high purity aluminium in DC arc plasma reactor.
特殊阳离子重氮化合物，含其作为直接染料的组合物，角蛋白纤维染色方法及其装置。
Cationic diazo compounds, compositions comprising them as direct dye, process for dyeing keratin fibers and device therefor.
用高能量密度脉冲等离子体于室温下在氮化硅陶瓷刀具上成功沉积了高硬耐磨的氮化钛涂层。
Hard and wear-resistant titanium nitride coatings were deposited by pulsed high energy density plasma technique on silicon nitride ceramic cutting tools at ambient temperature.
本文描述了电弧等离子体制备粉末状氮化硼的主要特点。
The main advantages of the are plasma methods in preparation of powdered Boron Nitride are described.
目的：研究应用离子束辅助沉积制备氮化钛薄膜后，对磁性附着体磁力的影响。
Objective: To study the effect of TiN film obtained by ion beam assisted deposition (IBAD) technology on magnetic force of FeCrMo soft magnetic alloy.
评估结果表明，用直流等离子体氮化金属铝的特种制粉工艺所制备的超细氮化铝粉主相量已达95%。
The results of the evaluation have shown that the main phase quantity of ultrafine AlN powder prepared by the special powder manufacture, DC plasma nitridation of metallic aluminium have reached 95%.
采用自行研制的磁增强活性反应离子镀系统，在脉冲偏压条件下成功地合成了高品质立方氮化硼(cBN)薄膜。
High quality cubic boron nitride (c BN) films were synthesized in lab built magnetically enhanced active reaction evaporation system with pulsed DC bias.
催化裂化轻汽油醚化工艺适应了生产清洁汽油的要求，轻汽油中含有的少量碱性氮化物中和阳离子交换树脂催化剂的酸性，造成催化剂失活。
The etherification process of FCC light gasoline meets the requirement of producing clean gasoline, while the basic nitrogen compounds can deactivate the etherification catalyst-sulfonic acid resin.
催化裂化轻汽油醚化工艺适应了生产清洁汽油的要求，轻汽油中含有的少量碱性氮化物中和阳离子交换树脂催化剂的酸性，造成催化剂失活。
The etherification process of FCC light gasoline meets the requirement of producing clean gasoline, while the basic nitrogen compounds can deactivate the etherification catalyst-sulfonic acid resin.
应用推荐