目的探讨准分子激光原位角膜磨镶术治疗患者健康教育指导模式。
Objective To discover the mode of health education in patient who will undergo LASIK.
目的探讨准分子激光上皮瓣下角膜磨镶术(LASEK)治疗超高度近视的安全性和有效性。
OBJECTIVE to investigate the effectiveness and safety of laser subepithelial keratomileusis (LASEK) for the correction of intense myopia.
目的探讨准分子激光原位角膜磨镶术术后角膜地形图形态变化及其对矫正视力的影响。
Objective to explore the change on corneal topography and association with loss of spectacle-corrected visual acuity after laser in situ keratomileusis (LASIK).
目的：评估近视眼准分子激光原位角膜磨镶术(LASIK)前预防性激光光凝治疗视网膜裂孔的有效性和安全性。
AIM: to assess the efficacy and safety of prophylactic laser photocoagulation for retinal breaks before laser in situ keratomileusis (LASIK) in myopic eyes.
要达到多对少磨的目的，需要在破碎阶段利用细碎机尽可能降低物料的粒度，使其达到细碎状态。
To achieve the purpose of to less, need to grind finely machine by crushing phase of material as low as possible, make its reach size finely state.
目的探讨改良部分迷路切除岩骨尖入路(PLPA)的岩骨磨除技术。
Objective to probe abrasion technique of the petrous bone via modified partial labyrinthectomy petrous apicectomy (PLPA) approach.
目的分析准分子激光原位角膜磨镶术(LASIK)对高度近视的疗效。
Objective to analyse and evaluate the therapeutic effects of laser in situ keratomileusis (LASIK) for correction of high degree myopia.
目的探讨在准分子激光角膜上皮下磨镶术后，角膜上皮细胞凋亡的现象。
Objective to study the human corneal epithelial cell apoptosis after laser subepithelial keratomileusis.
目的探讨冠状动脉旋磨术治疗冠状动脉钙化病变的安全性及有效性。
Objectives To investigate the safety and efficacy of coronary rotational atherectomy in the treatment of coronary artery calcification lesions.
目的：评价准分子激光原位角膜磨镶术(LASIK)术后角膜瓣复位术的临床疗效，探讨预防并发症的措施。
Purpose: to evaluate the clinical effect of corneal flap re-position after LASIK and to investigate the methods for complications.
目的探讨准分子激光原位角膜磨镶术(LASIK)对白内障人工晶体植入术后屈光不正的矫治效果。
Objective to evaluate the efficacy of laser in situ keratomileusis (LASIK) for the treatment of ametropia after cataract extraction and intraocular lens implantation.
目的：研究激光角膜原位磨镶术(LASIK)前后，角膜后表面屈光度及曲率半径的改变以及影响因素。
Objective: to investigate the changes in the posterior corneal surface topography after LASIK and the factors that influence the results.
目的：观察不同的磨抛程序和自上釉的陶瓷表面的粗糙度，为临床陶瓷修复体抛光提供可参考的依据。
Objective to compare the effect of different polishing methods and self-glazing on the roughness of ceramic surface, providing reference to restoration polishing in clinic.
目的探讨经口咽入路齿状突磨除行脑干腹侧减压的手术技巧及安全性。
Objective To study the microsurgical odontoidectomy via transoral transpharyngeal approach for craniovertebral junction malformation and its safety.
目的了解准分子激光角膜原位磨镶术(LASIK)治疗近视对眼位的影响及临床意义。
Aim to find out the effect of laser in situ keratomileusis (LASIK) on eye position and its clinical importance.
阐述钢球硬磨加工中产生的磨削烧伤并探讨磨削烧伤的危害性，目的是控制产品加工中的损耗，降低产品成本。
Grinding burn and the harm during the hard grinding of steel ball are elaborated, the purpose is to control the loss of production process and decrease the cost of product.
目的探讨准分子激光角膜上皮瓣下磨镶术（LASEK）中乙醇对角膜伤口愈合过程的影响。
Objective To assess the effects of 20% ethanol used in LASEK on corneal wound healing.
由于钢渣成份波动大、易磨性差以及稳定性不好，钢渣用作水泥混合材或混凝土掺合料均难以达到高效、高值化利用的目的。
Steel slag is not better to produce cement or mineral admixture of concrete because of poor grindability, larger fluctuation of chemical and mineral components, poor stability and so on.
目的研究激光辅助原位角膜磨镶术(LASIK)手术过程中，角膜瓣碎裂的处理及临床结果与疗效。
Objective to study the effect to deal with the chip of corneal flap during laser assisted in situ keratomileusis (LASIK).
镜是用作天文用途，设计及磨装均以履行此为目的及在该个环境时是为最佳。
Use of mirrors is for astronomical telescopes. They are designed and fabricated to perform excellently for that purpose and in that environment only.
它是以提高成纸质量、降低磨浆能耗为目的，通过改变磨浆机速度、磨浆温度及浆料停留时间来实现的。
The aim is to enhance paper quality and reduce power consumption, it is achieved by adjusting refiner speed, refining temperature and stock residence time under this temperature.
目的建立磨积颗粒的质量标准。
Objective To establish the quality control standard for Moji granules.
同时，她基于印度的羯磨和再生观念赋予人类新的生活目的。
At the same time she gave man a new purpose of living based on Indian concepts of karma and reincarnation.
目的：观察四磨汤对胆囊切除术后肠道功能恢复的影响。
Objective to evaluate the effect of Simotang on resumption of gastrointestinal function in patients after cholecystectomy.
目的确定四磨汤颗粒剂中混合挥发油包合工艺最佳路线。
Objective To determine the optimal inclusion technology for volatile oil of Simotang Granules.
目的比较波像差引导的准分子激光原位角膜磨镶术（LASIK）与常规LASIK治疗近视眼的临床疗效。
Objective To contrast the clinical effects of wavefront aberration-guided excimer laser in situ keratomileusis (LASIK) with conventional LASIK in the treatment of myopia.
笔者对磨辊表面进行激光束淬火处理，以提高磨辊的表面硬度，增强磨辊的抗磨粒磨损性能，从而达到延寿的目的。
Author used laser beam to quench the surface of the ore milling roller, so that increase its surface hardness and improve its wear resistance properties, and prolong its service life.
通过加大磨机筒体直径达到提高产能的目的；
The output is increased by means of enlarged mill's chamber.
目的比较准分子激光角膜上皮瓣下磨镶术(LASEK)与多光区准分子激光角膜原位磨镶术(M -LASIK)治疗高度近视的临床疗效。
Objective to contrast the clinical effects of Laser Epithelial Keratomileusis (LASEK) and multi zone Laser in Situ Keratomileusis (M-LASIK) for the treatment of high myopia.
目的比较准分子激光角膜上皮瓣下磨镶术(LASEK)与多光区准分子激光角膜原位磨镶术(M -LASIK)治疗高度近视的临床疗效。
Objective to contrast the clinical effects of Laser Epithelial Keratomileusis (LASEK) and multi zone Laser in Situ Keratomileusis (M-LASIK) for the treatment of high myopia.
应用推荐