减少纸浆精磨；降低对磨浆机的功率要求。
Reduce refining or horse power requirements in stock preparation.
本文对双螺杆磨浆机的设计理论进行了研究。
This paper focuses on the study of the design theory of twin screw pulping machine.
介绍了高浓锥形磨浆机双闭环浓度控制方法。
In this paper, a novel refining consistency control method of a high consistency conical disc refiner is introduced.
适用于：空气压缩机、医疗器械、磨浆机等机械。
Applications: Air compressors, medical instruments and small machine tools, etc.
该机可完全替代传统的低浓盘磨机和锥形磨浆机。
This machine can be completely instead of traditional the low-consistency disk refiner and the conical refiner.
本文介绍一种用双盘磨浆机处理节子的机械处理方法。
In this article, the mechanical treatment method by using double disc refiners to refine knot is studied. The mill-run results suggest that;
本文对双螺杆磨浆机的传动系统进行了较为深入的研究。
This paper focuses on the study of the driving system about twin screw grinder.
双盘磨浆机是目前造纸工厂广泛应用的一种连续打浆设备。
At present, This machine is widely used for a continuously striking pulp in the paper mill.
对双螺杆磨浆机产量与螺杆几何参数之间的关系进行了研究。
The relation between the output of twin screw pulping machine and the geometric parameter of the screw has been studied.
该方法能在保证锥形磨浆机较高生产效率的同时改善纸浆质量；
The proposed method can improve pulp quality at high production rate of the conical disc refiner.
本文主要对双圆盘磨浆机的打浆特性、典型打浆工艺流程作了阐述。
Beating Feature and typical technological process of double disc refiner were analysed.
对双螺杆磨浆机的螺杆扭矩、轴向推力和机筒压力进行了测量实验研究。
Metrical experimental studies on screw torque, axial thrust, barrel inwall pressure of twin screw pulping extruder (TSPE) were done.
系物料直接送进磨室，采用特殊拨料离心翼轮强制分离进料的高浓磨浆机。
The material to send in the whet room directly, adopt special stir to anticipate centrifugal wing wheel to separate compellable inlet pulp the machine.
该机是一种连续打浆设备，与双盘磨浆机相比可以实现更高效的纤维切断。
The equipment is a continuous refining equipment, compare with the Double plate. It can be achieved more efficient fiber cutting.
根据磨浆机工作特点，设计了基于S 7- 200的新型磨浆机控制系统。
According to the working characteristics of refiner, a new refiner control system based on S7-200 was designed.
通过分析有效磨浆功、有效缘角负荷、有效表面负荷，阐明了磨浆机的打浆机理。
The refining mechanism of refiner is discussed by analyzing the specific refining energy, the specific edge load and the specific surface load.
轴向推力和功耗是影响双螺杆磨浆机可靠性的重要因素，目前尚无理论计算方法。
The axial force and power consumption are important factors of affecting reliability of twin screw pulping extruder, at present there are no theory calculation methods about them.
由电机带动螺旋机构推动湿豆进入磨浆机中，通过调节电机转速调节湿豆供应量。
The motor driven screw mechanism pushes wet soybeans into the grinder. Feed can be adjusted by changing RPM of the motor.
本文主要对双螺杆磨浆机的动力学参数(流率、功耗、螺杆扭矩和轴向力)进行了研究。
The paper focuses on the study of dynamics parameters that include flow rate, power consumption, torque and axis force of twin screw pulping extruder.
本磨盘为双（单）盘磨浆机配套的备件，具有良好的帚化、疏介作用及一定的切断能力。
The plates are the spare parts for pulp refiners. While they are very effective in separation and selection of pulp substances, they are also able to break the same.
根据电动机控制理论，以及双螺杆磨浆机和挤出机之间的差异，对双螺杆磨浆机控制系统的进行了研究。
According to the theory of motor control and the differences of the twin screw pulping machine and twin screw extruder, the theory of control system has been studied.
它是以提高成纸质量、降低磨浆能耗为目的，通过改变磨浆机速度、磨浆温度及浆料停留时间来实现的。
The aim is to enhance paper quality and reduce power consumption, it is achieved by adjusting refiner speed, refining temperature and stock residence time under this temperature.
市国内外常用的较为理想的连续打浆设备，可单台使用或多台串联使用，也可与双圆盘磨浆机等设备串联使用。
Lt is an ideal continuously running refiner, lt can be used single or multi series, it is generally arranged in series with double disc refiner.
本文的研究工作对双螺杆磨浆机的整机设计具有重要的指导意义，对同类产品的设计和研究也有一定的借鉴作用。
The paper plays an important role in the design of the whole system of twin screw grinder and is a reference on design and study of the congener mechanics.
本文的研究工作对双螺杆磨浆机传动系统的设计具有重要的指导意义，对同类产品的设计和研究也有一定的借鉴作用。
The paper plays an important role in the design of the driving system of twin screw grinder and is a reference on design and study of the congener mechanics.
本文的研究工作对双螺杆磨浆机传动系统的设计具有重要的指导意义，对同类产品的设计和研究也有一定的借鉴作用。
The paper plays an important role in the design of the driving system of twin screw grinder and is a reference on design and study of the congener mechanics.
应用推荐