冲击磨料磨损是一种极恶劣的磨损工况。
Impact abrasive wear is one of the worst conditions on abrasion.
铲斗切削刀刃为抗磨料磨损钢材，布氏硬度达500。
Bucket cutting edges of abrasive-resistant steel of up to 500 Brinell.
分析观察测量失效的环模，磨料磨损是它的主要失效形式。
To analyze, observe and survey the expired circular mould, the abrasive wearing is its main expiration form.
锡青铜的主要磨损机制是疲劳脱层、粘着转移和磨料磨损。
The main wearing mechanisms of the tin bronze are fatigue splitting, adhesive transference and abrasive wearing.
这对承受严重冲击的抗磨料磨损的机件来说，具有重要的意义。
It favours the parts which is used to resisted the abrasive wear in severe impact work.
在三体磨料磨损中，磨粒的运动方式对金属的磨损有重要影响。
The movement patterns of abrasive particles are of important influence on the wear of materials in three-body abrasion.
研究了铸造复合中锰奥氏体钢在冲击磨料磨损条件下的耐磨性能。
The wear resistance of casting composite medium manganese steel has been studied under the condition of impact abrasive wear.
对不同载荷作用下的高铬铸铁在耐磨实验机上进行了磨料磨损试验；
The high chromium white cast iron was carried on wear abrasion test under different loads on the testing machine.
冲击磨料磨损过程以冲击变形磨损为主，兼有切削磨损和凿削磨损。
The impact abrasive wear-off process contained the impact deformation wear as main, and also the cutting wear, as well as the chiseling wear.
用X射线衍射分析方法测定了镀层表面结构并作了冲击磨料磨损试验。
The X-ray diffraction was used to determine the structure of the coating surface. At last, the shock abrasive wear test was performed.
磨浆段螺旋套主要的失效形式为高应力磨料磨损，同时伴有腐蚀磨损。
The main failure form of pulping scroll cover is high stress grinding abrasion accompanying corrosive abrasion.
硬铸铁和常用的铬系白口铸铁进行了削盘磨损试验和冲击磨料磨损试验。
Abrasion-resistant capability of Ni-cast iron and Cr-cast iron were studied by abrasion wears and impact test.
结果表明铬系白口铸铁的抗磨料磨损性能与其成分和组织有着密切的关系。
The result shows that the abrasion capability of Ct-white cast iron has compact relations with its composition and microstructure.
通过AWRMDS，用户可以输入、存储、查询和打印耐磨料磨损材料数据。
The user can input, store, inquire and print the data of abrasive wear resistance materials by AWRMDS.
研究了真空熔铸法制备的锰白铜基铸造碳化铬复合材料的二体磨料磨损机理。
The abrasion wear mechanism of Mn copper-nickel alloy matrix-cast chromium carbide composite was studied.
磨损有五种磨损形式：磨料磨损、冲蚀磨损、粘着磨损、疲劳磨损和腐蚀磨损。
There are five forms of wear and wear: abrasive wear, erosive wear, adhesive wear, fatigue wear and corrosive wear.
研究了石英和煤两种磨料条件下材料的冲击磨料磨损耐磨性及其疲劳磨损机制。
The impact abrasive wear resistance of materials and its fatigue wear mechanism under the conditions of quartz and coal as abrasive had been investigated.
利用这些诊断结果表明，针磨料测试并不代表高应力磨料磨损在任何工业相关的常识。
Using these diagnostics it is shown that pin abrasive tests do not represent high stress abrasion in any industrially-relevant sense.
在对搅拌器中衬板失效分析的基础上，对镍硬铸铁和铬系白口铸铁进行了磨料磨损试验。
On the base of invalidation analysis of the wear liners of the beater, the abrasion-resistant capability experiment is carried through NJ-cast iron and Ct-white iron.
高应力磨料磨损或低应力磨料磨损工况条件下，高铬白口铸铁空淬后不须回火可直接应用。
Under high stress or low stress abrasion working conditions, high Cr white cast iron can be used just after it having been air quenched.
对受高温磨损破坏的导卫板进行了失效分析，认为导卫板主要受到了疲劳磨损和磨料磨损。
The guide piece, which was worn seriously under high temperature, was analyzed. It is show that the wear mechanism of guide piece is fatigue wear and abrasive wear.
指出陶瓷刀具材料切削磨损时的基本机理仍然是磨料磨损、粘结磨损、化学反应与扩散磨损。
It is finally pointed out that the main wear mechanisms of the ceramic tool materials are still abrasive, adhesive, chemical reaction and dispersion wear.
结果表明，在中、低冲击磨料磨损条件下，试验钢的耐磨性优于中碳低合金耐磨钢和高锰钢。
Under lower and medium impact energy, the abrasive wear resistant performance of the steel metioned is higher than that of low alloyed medium carbon wear resistant steel and high manganese cast steel.
根据在高温氧化性气氛下磨料磨损的工况条件，合理设计了抗磨耐热钢材料的组织和化学成分。
According to the working condition of high temperature and abrasive wear, the material structure and composition of the wear-resistant and heat-resistant steel are designed.
数据是以表明磨料磨损模式，可以查明，从数量方面的业绩进行比较，重点班的耐磨材料的合金。
Data are presented which indicate that abrasive wear mode can be identified from quantitative performance comparisons between key classes of wear-resistant alloys.
采用上述工艺参数对浆料进行半固态挤压成形，并对挤压件进行冲击韧性、硬度和冲击磨料磨损测试。
Use these technical parameters, carry the semisolid extrusion shaping to the slurry, then test the impact ductility, rigidity and impacting grinding abrasion.
酸性腐蚀与生锈是由机油成分所控制的，而磨料磨损是由空气、机油过渡与机油更换间隔时间所控制的。
Acidic corrosion and rusting are controlled by formulation of the oil while the abrasive wear is controlled by air and oil filtration and oil drain intervals.
以高铬铸铁为参考材料 ，研究了真空熔铸法制备的锰白铜基铸造碳化钨复合材料的二体磨料磨损特性。
The two body abrasion wear characteristic of Mn copper nickel alloy matrix cast tungsten carbide composite has been studied using high chromium cast iron as a reference material.
以高铬铸铁为参考材料 ，研究了真空熔铸法制备的锰白铜基铸造碳化钨复合材料的二体磨料磨损特性。
The two body abrasion wear characteristic of Mn copper nickel alloy matrix cast tungsten carbide composite has been studied using high chromium cast iron as a reference material.
应用推荐