论文建立了磨料水射流表面抛光模型。
A model of surface polishing using abrasive water jet was established.
试验结果表明，磨料水射流切割无热影响区。
Theresult proved, abrasive water jet metal-cutting don't exit heat effect.
磨料水射流的基本段用于工件抛光比较有利。
The basic section of abrasive water jet is more favorable for the workpiece polishing.
磨料水射流抛光技术是应用于表面抛光加工的新技术。
Polishing technique of abrasive water jet (AWJ) is an advance process which can be applied to surface polishing.
磨料水射流加工孔的直径和深度随靶距的增加而增加。
The diameter and depth of the holes eroded by HPAWJ increase with the increase of stand-off-distance.
主要叙述了人工神经网络理论在磨料水射流切割技术中的应用。
This paper elaborates on the Artificial Neural Network application to the abrasive water jet cutting technology.
论述了高水压、小流量的磨料水射流清理新工艺的试验研究成果。
Experimental research achievement of new technology of abrasive water jet cleaning with high pressure and small flow is discussed.
本文介绍了超高压力磨料水射流切割机的工作原理、特性和用途。
The review focused on the characteristics of various converters, principles and the applications of ADC and DAC.
不仅适用于磨料水射流切割机，也可用于其它类似加工设备的控制。
It is suitable for the abrasive water-jet cutter as well as other similar processing equipment.
通过算例论证了淹没环境下，实现气体保护层磨料水射流的可行性。
The feasibility of realization of AWJ with gas protection layer in submerged water is confirmed by computational example.
根据工业性切割的需要，对磨料水射流(awj)切割机制进行实验研究。
Experiment study has been made on abrasive water jet (AWJ) cutting mechanism according to the demand of industrial cutting.
磨料水射流复合电解光整加工是在磨料水射流作用的基础上复合电解加工。
The process of abrasive water jet (AWJ) compound with electrolytic machine is based on AWJ.
论文以磨料水射流理论为基础，对磨料水射流表面抛光技术进行了详细研究。
Based on the theory of abrasive water jet, surface polishing using abrasive water jet techniques was studied in detail.
近年来，高压磨料水射流这种新兴的加工工程陶瓷的方法越来越受到人们重视。
In recent years, more and more importance has been attached to the new machining method of engineering ceramics, i. e. abrasive water -jet.
作者简要介绍高压磨料水射流技术防突原理、工作面试验应用、效果分析及建议。
The author briefly introduces the principle, working face testing and application, effectiveness analysis and Suggestions on outburst control for high pressure grinding water jet technology.
微磨料水射流加工技术正成为制造微细结构零件重要的经济高效的微细加工技术。
Micro abrasive water jet machining (MAJM) is becoming an important machining technique for cost effective micro machining.
微磨料水射流抛光技术的研究和应用具有重大理论意义和实用价值，具有广泛市场前景。
Study on surface polishing technology using micro abrasive water jet has great academic meaning and application value. It has wide application market.
着重从磨料水射流切割技术的特点、切割机理、关键技术以及切割效果的影响因素做了综述。
The abrasive water-jet cutting technology is mainly summarized on the aspects of the characteristic, cutting mechanism, crucial technology, and the influencing factor of cutting effect.
提出在有防爆要求的场合下，利用前混合磨料水射流冷切割技术对混凝土等脆性材料进行切割。
To meet the occasion that has the requirement of explosion proof, the cold cutting technology of premixed abrasive water jet was proposed to use in the cut of brittle materials such as concretes.
采用低压磨料水射流对高效率、高精度、高表面质量的CBN(立方氮化硼)砂轮进行了研究。
In this paper, the CBN grinding wheel of high efficiency, accuracy and surface quality was studied by means of low pressure abrasive water jet.
针对上述问题，对多种除锈工艺进行分析比较，推荐采用气、液、固三相磨料水射流进行除锈的新工艺。
After comparing and analysing varied rust removal techniques, this article recommends the new technique of rust removal with three phase abrasive water efflux of gas, liquid and solid.
数值计算结果证实了前混合磨料水射流切割同样的材料所需压力仅为后混合磨料水射流的1/10左右。
The numerical values show that the pressure of pre-mixed abrasive water-jet for cutting the same material is only 1/10 of sub-mixed abrasive water-jet approximately.
前言：在磨料水射流切割设备中，磨料其主要工作介质，磨料与水的混合方式主要有前混合和后混合两种。
In water jet cutting(WJC) devices, the cutting medium are many kinds of abrasives. There are two types of abrasive mixing methods widely used in present WJC devices: post-mixing and pre-mixing.
通过对半导体加工工艺的分析研究，提出了用磨料水射流切割半导体材料，包括晶圆的切割、芯片的终端封装切割。
After an analysis of the process of semiconductor fabrication, a proposal of the wafer dicing using micro-abrasive waterjet is put forward.
前混合磨料水射流对混凝土等建筑脆性材料具有良好的切割效果，在易燃易爆等应急场合进行切割作业具有独特优势。
Good effect of cutting brittle materials such as concrete by premixed abrasive water jet shows that this clod cutting technology has a unique advantage in the schoolwork under urgent conditions.
介绍了磨料水射流技术广泛的应用及前景，并详细地介绍了磨料水射流数控切割机床的总体结构、工作原理和机构设计。
This paper introduces application and foreground of abrasive water jet, and introduces general structure and working principle of CNC abrasive water-jet machine tool.
磨料水射流加工在切口形成过程中出现冲蚀延时现象，从而在直线切割时形成切口斜度，在圆形零件切割时形成切口锥度。
Phenomenon of erosion delay in forming kerfs by abrasive waterjet will cause kerf incline in straight cutting or kerf taper in circular cutting process.
磨料水射流表面抛光技术作为一种新型的精密抛光技术，其具有的独特优势使其可以在各种难以抛光材料的抛光中发挥作用。
As a new type of precision polishing technology, surface polishing using abrasive water jet has unique advantages, such as polishing hard-polishing materials etc.
作者在玻璃上进行微磨料水射流微细槽加工的实验基础上，对微磨料水射流加工的表面形貌、材料冲蚀去除机理及加工工艺性能进行了研究。
This paper presents a study of using micro-abrasive water jet for the machining of micro-channels on brittle glasses. The erosion mechanism, surface pattern and process performance are studied.
作者在玻璃上进行微磨料水射流微细槽加工的实验基础上，对微磨料水射流加工的表面形貌、材料冲蚀去除机理及加工工艺性能进行了研究。
This paper presents a study of using micro-abrasive water jet for the machining of micro-channels on brittle glasses. The erosion mechanism, surface pattern and process performance are studied.
应用推荐