因此对固着磨料加工机理进行深入研究，以拓展其应用范围具有重要的意义。
Hence it is crucial to deeply study machining mechanism of solid abrasive in a bid to expend the application range.
探讨了固着磨料研磨中磨料尺寸、研磨压力和研磨速度等研磨参数对工件已加工表面残余应力的影响规律。
The effect of some lapping parameters, such as: abrasives size, lapping pressure and lapping speed, on the residual stress at surface of work-pieces was discussed.
磁性研磨是一种利用磁场中的磁性磨料对具有相对运动的工件表面进行光整加工的新技术。
The magnetic abrasive finishing is a new technology used to process the surface of work piece by the relative motion with magnetic abrasive in the magnetic field.
树脂打磨片、切割片由金刚砂磨料树脂化工等原料加工而成。
First, resin grinding tablets, cutting tablets from carborundum abrasive resin from chemical processing of raw materials.
近年来，高压磨料水射流这种新兴的加工工程陶瓷的方法越来越受到人们重视。
In recent years, more and more importance has been attached to the new machining method of engineering ceramics, i. e. abrasive water -jet.
目前，有很多技术，而其中之一是加工 （AFM）过程的磨料流。
Presently, there are many techniques and one among them is abrasive flow machining (AFM) process.
通过正交试验证明加工时间是影响去除量的主要因素，而磨料粒度对表面粗糙度影响较大。
Orthogonal experiment shows that the time is the main factor of removal rate and abrasive granularity is the crucial factor of surface roughness.
不仅适用于磨料水射流切割机，也可用于其它类似加工设备的控制。
It is suitable for the abrasive water-jet cutter as well as other similar processing equipment.
磨料水射流抛光技术是应用于表面抛光加工的新技术。
Polishing technique of abrasive water jet (AWJ) is an advance process which can be applied to surface polishing.
本文主要介绍调制盘的加工工艺与测试方法以及加工过程中所用的磨料与辅料。
The processing technologies, testing method, abrasive and accessory materials used in processing procedure of reticle are introduced in the paper.
超硬磨料砂轮对磨削加工技术的进步有决定性影响，本文介绍了超硬磨料砂轮合理使用的方法。
Superhard - abrasive grinding wheel has decisive influences on the advance of grinding technique, this paper introduces the reasonable using method of superhard -abrasive grinding wheel.
本文通过实验研究了在固着磨料高速研磨中，研磨压力对工件已加工表面粗糙度的影响。
Through experiments of high speed lapping with solid abrasives, the effect of lapping pressure on machined surface roughness is studied in this paper.
介绍了一种新型的磁性磨料，并对该磨料的加工性能进行了实验研究，得到了该磨料的最佳配比。
A new type of magnetic abrasive is introduced and its machining property has been studied through experiments from which the optimal proportion of the abrasive mixture has been obtained.
磨料水射流加工在切口形成过程中出现冲蚀延时现象，从而在直线切割时形成切口斜度，在圆形零件切割时形成切口锥度。
Phenomenon of erosion delay in forming kerfs by abrasive waterjet will cause kerf incline in straight cutting or kerf taper in circular cutting process.
采用微磨料气射流加工技术(MAJM)，对普通硅酸盐玻璃进行微流道槽加工。
The micro abrasive jet machining (MAJM) technology was used to make micro channels on the glass.
流体磨料的粘度是磨料流加工工艺的重要参数。
The viscosity of flowable abrasive mixture is an important parameter in abrasive flow machining (AFM).
微磨料空气射流加工（MAJM）技术是对硬脆材料进行微细加工的一种非常有潜力的技术，特别是对复杂的三维微细结构的加工。
Micro Abrasive Jet Machining (MAJM) is a promising technique for micro processing of hard and brittle materials, particularly for machining complicated three - dimensional microstructures.
介绍了特种加工技术在修整金属结合剂超硬磨料砂轮中的应用。
The application of nontraditional machining technology in the dressing of metal bonded superabrasive grinding wheel is introduced.
分别从精磨模、精磨磨料、抛光膜层、抛光辅料、机床速度和压力等方面介绍了一种加工蓝宝石整流罩的工艺方法。
Sapphire dome machining technology is introduced by exploring grinding tool and milling and polishing film and supplement material and machine speed and pressure etc.
磨料水喷嘴的加工精度要求高，用一般的加工方法难以完成。
The requirement of processing accuracy is high for abrasive nozzle and it is hard to accomplish the processing by common methods.
固着磨料平面研磨加工中磨具的均匀磨损对于保证磨具和工件的加工面形精度具有极为重要的意义。
In the process of plane lapping with solid abrasive, the uniform abrasion of lapping tool is very important to ensure a good form of the workpiece and the lap-ping tool.
结论可为定量分析磨料流加工提供理论依据。
The conclusions obtained can be used to provide the theoretical basis of quantitative analysis of abrasive flow machining.
最普通的精加工工序是用机械的方法，如研磨，磨削或用磨料。
The most common finishing operations are mechanical, such as milling, grinding, or polishing with abrasives.
阐述了非织造布抛光材料的特性、制造方法、磨料的适用范围、产品成型的种类和适宜加工的对象。
It introduces the features of nonwoven abrasive pads, forming and application fields, types and suitable materials for process.
钢球加工过程中采用树脂砂轮进行研磨，代替了铸铁板加磨料的加工方法，使钢球质量得到很大提高。
During steel ball processing, resin bond wheel was used to grinding to replaced a processing way of cast iron plate and grinding material, so the steel ball quality was raised greatly.
固着磨料球面高速研磨是在球面高速研磨机上采用成形法加工球面工件。
During the processing of spherical workpieces on high speed spherical surface solid abrasives lapping machine, we must ensure the surface precision of the workpieces.
由于超声磨料混粉电火花加工是一个复杂的过程，难于建立精确的加工理论模型。
On account of the ultrasonic abrasive mixed powder EDM is a complex process, it is difficult to build a precise mathematical model of the processing.
天然磨料有其独特的作用，在某些加工领域，天然磨料甚至具有比人造磨料更优越的性能。
The natural abrasive has special effect and superior performance than artificial abrasive in some field.
用气流磨加工碳化硅磨料时，约有5%- 15%的物料变成了尾尘。
About 5% - 15% materials become tailing dust during the jet mill manufacture of silicon carbide.
用气流磨加工碳化硅磨料时，约有5%- 15%的物料变成了尾尘。
About 5% - 15% materials become tailing dust during the jet mill manufacture of silicon carbide.
应用推荐