球-盘磨损试验之后，找出最优的复合强化工艺。
The best strengthening technological parameters was selected after ball-disk wear test.
本文介绍一种简易的活塞环与气缸套磨损试验方法。
A simple testing method of wear resistance for piston ring and cylinder sleeve is introduced.
磨损试验；
用环块磨损试验机进行了磨损试验，并进行了腐蚀试验。
The wear tests with ring on block wear test machine and corrosion tests were carried out.
本文报道了六种钢轨和不同硬度车轮样品的磨损试验结果。
It presents the results of wear tests of wheels on six rails with different hardness.
通过磨损试验研究了变形对低合金耐磨铸铁耐磨性的影响。
The abrasiveness of white cast iron with low alloy content was studied through abrasion test.
讨论了正交试验法的原理，以及在汽缸套磨损试验中的应用。
This paper discusses the theory of the orthogonal test, and its application to the experiment of wears in automobile cylinder.
低应力冲刷磨损的测试是在混砂盘及橡胶轮两种磨损试验机进行。
Low stress erosion wear tests were done in sand mixing pan and rubber wheel wear testing machine.
将该模型用于销盘磨合磨损试验，对最佳分形维数进行了准确预测。
Let the model be used in the pin-disc running in and wear test, an accurate prediction was carried out upon the optimum fractal dimension.
运用该工艺生产的航空刹车副动片基本满足了磨损试验的特殊要求。
Aerial craft brake movable piece produced with new heat treatment process have basically met the special requirements of wear test.
以上处理的试样经磨损试验，得到了磨损率和机械性能的一些关系。
Wear and tear tests of the treated specimen are made by Brinell wear test machine, and the relation between wear rate and mechanical property is set up.
对不同载荷作用下的高铬铸铁在耐磨实验机上进行了磨料磨损试验；
The high chromium white cast iron was carried on wear abrasion test under different loads on the testing machine.
以上处理的试样经磨损试验，得到了磨损率和机械性能的一些关系。
Wear and tear tests of the treated specimen are made by Brinell wear test machine, and the relation between wea...
用X射线衍射分析方法测定了镀层表面结构并作了冲击磨料磨损试验。
The X-ray diffraction was used to determine the structure of the coating surface. At last, the shock abrasive wear test was performed.
将该模型用于销盘磨合磨损试验，对最佳分形维数进行了准确预测。
When it is used in the running-in process, the model can predict optimum fractal dimension precisely.
铁谱技术是进行零件失效分析和模拟磨损试验可靠性评价的有效手段。
Ferrographytechnology is an effective tool for analysing wear failure and evaluating the...
利用自制冲蚀磨损试验装置，研究了耐磨胶粘涂层气固冲蚀磨损的特性。
The abrasion properties of wear-resistant adhesive coatings have been studied on self-created abrasion test facility.
硬铸铁和常用的铬系白口铸铁进行了削盘磨损试验和冲击磨料磨损试验。
Abrasion-resistant capability of Ni-cast iron and Cr-cast iron were studied by abrasion wears and impact test.
对制备的复合材料的磨损试验表明：磨损过程存在磨台阶段和稳态磨损阶段。
The wear process of the composite was composed of running-in and steady state wear.
本文介绍了一种装在S- 570扫描电子显微镜中的销-盘式磨损试验装置。
Pin-on-disk wear test equipment set in S-570 SEM is introduced in this paper.
运用MS—YGP磨损试验装置测定的数据，可作为工业磨煤机的选型依据之一。
The data obtained by using the MS-YGP wear test device can serve as a useful basis for the type selection of industrial coal pulverizing mills.
文中着重研究了模拟试验等效条件、磨损试验数据取值法和模拟试验参数的选择。
To verify the correctness of the method, the test results in the lab were compared with those in the paddy.
通过落球冲击和滑动磨损试验探讨了冲击对高铬铸铁和奥氏体不锈钢耐磨性的影响。
Effect of impact on wear resistance of high chromium cast iron and austenitic stainless steel has been studied by ball-on-ball impact and pin-on-disc abrasion test.
在对搅拌器中衬板失效分析的基础上，对镍硬铸铁和铬系白口铸铁进行了磨料磨损试验。
On the base of invalidation analysis of the wear liners of the beater, the abrasion-resistant capability experiment is carried through NJ-cast iron and Ct-white iron.
高温冲蚀磨损试验表明，各涂层的冲蚀磨损行为介于塑性与脆性冲蚀之间，并以塑性磨损为主。
The erosion tests at elevated temperature show that coating's erosion behavior is between plasticity and fragility.
对冲击磨损试验后试样进行了失重测量，并用SEM分析磨损表面形貌，用OM观察金相组织。
The mass loss after impact-wearing was measured, the morphology on the wear surface of the steel was analyzed by SEM, the microstructure was observed by OM.
本文介绍模拟试验中轴承表面光洁度和配合间隙与磨损的关系，同时简述了磨损试验和测量方法。
This paper investigates the influence of bearing's surface finish and clearance on its wearability obtained by simulating tests. The method of the wear test and measurement are briefly described.
研究证明，该试验机能模拟疏浚工况，已成功应用在挖泥船泥泵壳和绞刀片耐磨材料的磨损试验上。
The developed materials through the sand slurry abrasion test have been successfully put into practice in the shell of dredging pump and the cutter piece.
白口铸铁演出少得多，毫不逊色于工业服务环境，如球磨机可能会比预测的，由标准实验室磨损试验。
White cast irons perform much less favourably in industrial service environments such as ball mills than would be predicted by standard laboratory abrasion tests.
白口铸铁演出少得多，毫不逊色于工业服务环境，如球磨机可能会比预测的，由标准实验室磨损试验。
White cast irons perform much less favourably in industrial service environments such as ball mills than would be predicted by standard laboratory abrasion tests.
应用推荐