研究了金属多层膜的磨损特性与磨损机理。
In this paper, wear properties and mechanism of metal multilayer films were studied.
抗磨损特性提高了8倍。
研究了碳氮共渗钢制作的水泵体的磨损特性。
In this paper, abrasion behavior of carbonitriding steels used in the manufacture of pump body is studied.
对B104a一70型机械密封的磨损特性进行预测。
The wear characteristic of B104a-70 mechanical seal was predicted.
研究木工刀具磨损特性的目的就在于优化木材切削加工技术。
The aim to investigate the tools wear characteristics is to optimize the processing technology in Machining wood and wood based materials.
对硬齿面齿轮在不同的磨损阶段的磨损特性进行了定性和定量分析。
The characteristics of gears in each wear stage were analysed qualitatively and quantitatively.
结晶质聚合物通常多能抵御有机溶剂并具有良好的抗疲劳和磨损特性。
Crystalline polymers usually are more resistant to organic solvents and have good fatigue and wear-resistant properties.
本文重点综述了陶瓷刀具材料显微结构和力学性能对其磨损特性的影响。
The effect of the micro structure and the mechanical properties on the wear characteristics of the ceramic tool material is summarized primarily and emphatically.
研究了干式高速车铣d 60钢时金属陶瓷刀具的磨损机理和磨损特性。
A research is made on the Wearing mechanism and features of ceramic tool in high speed dry turning and milling of steel D60.
极佳的抗磨损特性，令机件在高速，高压和高温之下能有效地受到保护。
Excellent anti-scuffing property gives special protection where high speed, high pressure and high emperature conditions are experienced.
本文对气固冲蚀和浆体冲蚀条件下耐磨环氧胶粘涂层的磨损特性进行了研究。
The wear properties of antiwear adhesive coatings under solid particle erosion and slurry erosion condition were studied in this paper.
其他方法的例子也被公开，还公开了能显示出低磨损特性的植入体表面的特征。
Other examples of method are also disclosed, along with characteristics of implant surfaces that can exhibit low wear properties.
此阀门主要特点是通径全橡胶密封阀座，具有很强抗磨损特性和全通径流通性。
The main feature of this kind valve is entire rubber seal of diameter with anti-wear properties and all-pass runoff common gender .
该模型可用于预测微转子轴衬的磨损与接触状况，分析微转子系统的磨损特性。
This model can be used to predict wear of rotor bushing, to solve contact problem, and to analyze wear characteristics of the micro-rotor system.
研究了两种基体的亚共析钢经激光处理后，其硬化层的硬度梯度及其磨损特性。
The hardening gradient and the character of abrasion in hardening layer of hypoeutectoid steel with two kinds of matrixes that was treated by laser beam have been studied.
合金丝试样中部为变形磨损，侧面为微切削磨损，表现为典型的韧性材料冲蚀磨损特性。
The surface morphologies exhibit deformation wear in the middle and micro cutting wear in the sides, which indicate that all the samples exhibit ductile material characteristics in the erosion.
本文研究了齿轮啮合分离测试技术中测量齿轮的磨损特性，通过对测量时磨损规律的分析。
The character of special master gear wear for gear meshing and seperating technique is studied in this paper.
探讨了硬度对钢蜗轮副材料磨损特性的影响，为研究钢蜗轮副合理的硬度配对提供试验依据。
The influence of hardness difference on the wear behaviour of steel-steel worm gear's material is investigated, which provides a foundation for proper hardness matching.
本文对复合式悬架—轮胎系统的磨损特性及相关问题进行了较为深入的理论分析和试验研究。
Based on PASSAT B5 by Volkswagen, dynamic wear characteristics of compound suspension—tire system are studied experimentally and theoretically.
作者对机械密封端面的磨损特性进行了分析，以指导和改进机械密封的设计及对密封失效的判断。
Wears performance of mechanic face seal is analysed. Basis law for design and estimation and amelioration of mechanic seal's invalidation is provided.
本文借助实验，探讨了铸铁、球墨铸铁的磨损特性，同时指出了几种提高其耐磨性的表面处理方法。
This paper has discussed the wearability of groy cast iron and nodular cast iron and provided several surface treating methods for increasing their wear-resistance.
在动载三体磨粒磨损条件下，试验研究了冲击载荷的变化对铸态复相耐磨钢动载磨粒磨损特性的影响。
The influence of varying impact energy on wear resistance of dual phase cast steel has been investigated under impact three body abrasion.
以高铬铸铁为参考材料 ，研究了真空熔铸法制备的锰白铜基铸造碳化钨复合材料的二体磨料磨损特性。
The two body abrasion wear characteristic of Mn copper nickel alloy matrix cast tungsten carbide composite has been studied using high chromium cast iron as a reference material.
通过156口调整井钻井试验，对比分析了刮刀钻头和牙轮钻头的钻进特性、牙齿磨损特性、井底流场特性及钻井效果。
Through drilling experiment in 156 adjustment Wells, the drilling behaviors, cutter wear, downhole jet flow field and drilling effect of drag bits and roller ones were comparatively analyzed.
根据摩擦学原理，采用动态磨损模拟试验和表面微观分析研究的方法和技术，对气门动态磨损特性进行了系统的试验研究。
The wear properties of valve are systemically investigated by using dynamic simulation testing and surface microscopic analysis techniques based on principle of tribology.
热解生物质与煤共燃时的结渣、积灰和磨损特性取决于热解生物质灰分含量、灰成分，煤的灰分含量、灰成分以及混合比例等因素。
The slagging, fouling and abrasiveness performances of co-firing low-temperature pyrolyzed biomass with coal depend on the ash content, the ash component of them and their blending rate, etc.
研究了AZ91D镁合金在冲击载荷和去离子水介质综合作用下的磨损特性。结果表明，镁合金表面冲击斑深度及面积随冲击次数的增加而增加；
The impact wear behavior of AZ91D magnesium alloys in de-ionized water has been investigated. The results showed that the depth and area of wear scar increased with the impact cycles.
研究了AZ91D镁合金在冲击载荷和去离子水介质综合作用下的磨损特性。结果表明，镁合金表面冲击斑深度及面积随冲击次数的增加而增加；
The impact wear behavior of AZ91D magnesium alloys in de-ionized water has been investigated. The results showed that the depth and area of wear scar increased with the impact cycles.
应用推荐