简要分析了除尘风机的磨损机理。
The wear mechanism of the converter dedust fan is briefly analyzed.
其磨损机理表现为粘着磨损。
简要分析了引风机和排粉风机的磨损机理。
Mechanism of the abrasion on induced draft fan and powder exhaust fan is introduced briefly.
研究了金属多层膜的磨损特性与磨损机理。
In this paper, wear properties and mechanism of metal multilayer films were studied.
磨损机理主要是粘结磨损、扩散磨损以及疲劳磨损。
The main wear mechanisms are adhesion, diffusion and fatigue.
从磨损机理的角度分析了造成型钢轧辊辊面磨损的原因；
The wear of the roll surface has been analyzed in the view of wear mechanism.
通过对实验结果的分析，还论述了PDC片的磨损机理。
The author also depicts the wear characters of PDCs through discussing the experimentation results.
表面复合材料的磨损机理主要是反复塑性变形和疲劳剥落。
The wear mechanism of composites is mainly repeating toughness deform and fatigue flaking off.
本文还研究了纳米改性金属陶瓷刀具的切削性能和磨损机理。
Next, the cutting characteristics and wearing mechanism of cermets cutters with nano-TiN modifications are discussed in detail.
并提出套管磨损机理研究的新思路和减轻套管磨损的新方法。
Meanwhile, new ideas for researching casing wear mechanism and new methods to relieve casing wear are proposed.
根据链条铰链磨损机理，提出对链条快速磨损试验机的设计要求。
According to the chain hinge wear mechanism, this paper advances the design requirements of the high speed wear testing machine of chain.
磨损机理为切削磨损和脆性相断裂，其中切削磨损为主要磨损机理。
Wear mechanisms are cutting wear and brittle phase rupture. Cutting wear is main wear mechanism.
微观分析指出：履带板表面的磨损是多种类型磨损机理的综合结果。
Microscopy showed that the worn surface of track shoe is a combined result of multiple types of wear mechanism.
根据机车牵引齿轮磨损机理，从摩擦学角度出发分析轮齿啮合过程。
According to wear mechanism of the locomotive tractive gears, from the Viewpoint of tribology, the process of gearing is analyzed.
在分析辊压机辊面磨损机理的基础上介绍了辊面堆焊修复的新材料。
On base of analysing theory of roller surface abrasion, new materials of welding agent are introduced.
分析了供热阀门的磨损机理，探讨了简单修复供热阀门的工艺和材料。
This paper analyses the wear mechanism of heating valve, approahes simple repair technology and material of heating valve.
随复合材料硬度的增加，磨损机理由严重磨粒磨损向轻微磨粒磨损转变。
Wear mechanism transferred from server abrasive to adhesion with the increasing of hardness of the composites.
当PTFE含量较高时，磨损机理除了磨粒磨损外还有对偶件的粘着转移。
The wear mechanism was abrasive wear and adhesion transfer of the counter-parter when the volume content of PTFE was high.
研究了真空熔铸法制备的锰白铜基铸造碳化铬复合材料的二体磨料磨损机理。
The abrasion wear mechanism of Mn copper-nickel alloy matrix-cast chromium carbide composite was studied.
本文就其铸造质量、硬度分布、组织构成、磨损机理等作了分析并得出相应结论。
The paper analyses the foundry quality, hardness distribution, structure, abrasion mechanism and draws corresponding conclusion.
低速制动下的磨损机理主要为疲劳磨损，高速制动时主要为磨粒磨损和氧化磨损。
With the brake speed of the lower one it mainly refers to fatigue wear, while of higher one it mainly refers to abradant and oxidation wear.
通过用扫描电镜对磨损表面形貌进行的观察分析，探讨了复合涂料涂层的磨损机理。
By using SEM to examine the worn surface morphology, the wear mechanisms of these coatings were explored.
研究了陶瓷喷嘴材料的冲蚀磨损机理以及不同冲蚀磨料对陶瓷喷嘴冲蚀磨损的影响。
The erosion wears mechanism and the effects of different abrasives on the wear of ceramic nozzles are investigated.
主要叙述了省煤器的磨损机理。 对省煤器的设计，安装与运行提出防磨建议与要求。
Description of the principle on the wearing of economizer, and the suggestions & requirements for the design, installation and operation are cited.
初步确立了空气钻井钻柱冲蚀磨损机理，提出钻屑冲蚀是促使钻具失效的一项重要原因。
Establish the erosive wear mechanism of drilling string in air drilling and put forward that erosion wear is a substantial cause to promote drill string failure.
同时，在各个冲击功下，材料的磨损机理在冲击应力的循环作用下随时间发生明显变化。
Furthermore, at all impact power, the wear mechanism of the material changes distinctively with the time under the cyclic impact stress.
该材料低速制动下的磨损机理主要为疲劳磨损，高速制动时主要为磨粒磨损和氧化磨损。
In lowly brake speed it mainly refers to fatigue wear, while in highly brake speed it mainly refers to abrasive and oxidation wear.
该材料低速制动下的磨损机理主要为疲劳磨损，高速制动时主要为磨粒磨损和氧化磨损。
In lowly brake speed it mainly refers to fatigue wear, while in highly brake speed it mainly refers to abrasive and oxidation wear.
应用推荐