最后，根据应用正向推理机得到磨损故障的诊断结果。
Finally, the diagnosis results are achieved through forward chaining method.
实例表明，该方法能够有效地诊断出柴油机活塞缸套的磨损故障。
Actual applied instance indicates that this method can effectively diagnose the faults of piston-liner wear.
国产300MW汽轮机主油泵推力瓦磨损故障近年来时有发生。
Domestic main oil pump thrust tile of 300mw steam turbine wears and tears the trouble, happen timely in recent years.
对滚动轴承磨粒磨损故障进行了模拟试验和振动信号的处理和分析。
Simulating test and vibration signal analysis for abrasive wear failure of rollings bearings have been made in this paper.
斜盘泵在发生滑靴副磨损故障时表现出与正常状态下完全不同的动态特性。
With the wear fault of the slipper pair, the dynamic characteristics of the axial piston pump are different from the normal state.
振动信号能量在局域波时频分布中的变化，是局域波法诊断齿轮磨损故障的特征。
The energy variation of vibration signals is the features of gearbox-case fault diagnosis.
铁谱技术是近年来应用于监测机器设备运行状态和判断磨损故障的有效方法之一。
Recently, ferrography technique has been one of the effective methods for machine condition monitoring and fault diagnosis, which is based on the analysis of wear particle.
采用接触—分离二状态接触力模型，建立了隔膜泵曲柄滑块机构磨损故障动力学模型。
To research wear fault dynamic response for slider-crank of membrane pump, the wear fault dynamic model was built which based on the contact-separation state contact force model.
现场实测结果表明，利用柴油机表面振动信号来诊断柴油机主轴瓦异常磨损故障是可行的。
The real detecting result shows that it is feasible to use the engine surface vibration signal to diagnose main bearing shell abnormal wear trouble.
诊断实例表明，用神经网络方法可以准确地识别出重型机械设备磨损故障类型、程度和部位。
The diagnosis example shows that this system can promote the accuracy and speed of wear particles identification.
为斜盘泵滑靴磨损故障程度的影响因素分析及液压泵健康状态评估方法的研究奠定理论基础。
This study establishes a theoretical basis for the analysis of the degree of slipper wear factors and the research of hydraulic pump's health status assessment.
文中针对基于油液分析的12150发动机磨损故障监测方法进行研究，给出了油液监测机理。
This paper is concentrated on the study of the wear fault monitoring methods and the monitoring principle of 12150 engines based on oil analysis.
进一步关系研究发现，齿面发生故障时，相比磨损故障变化，振动信号反映故障的变化更敏感。
Further study on the correlation was provided that the changes of vibration signal were more sensitive than the changes of wear when the tooth surfaces of the gear broke down.
结合油液光谱分析的数据和发动机在实际中常见磨损故障现象，研制和开发了油液光谱分析诊断专家系统。
Combining the Spectrometric oil analysis data and the practical wear fault phenomena of the engines, the author has developed a Spectrometric oil analysis fault diagnosis expert system.
铁谱技术作为一种不解体的磨损故障检测与诊断手段，已愈来愈为众多专家、学者和工程技术人员所关注。
The ferrography, as a kind of non-disassembly fault detection and diagnosis method for wear abrasion, has been paid more attentions to the application by many experts and scholars.
在曲柄轴承磨损故障机理的研究基础上，论文对其故障特征信息提取及故障识别方法开展了进一步的研究。
Based on the research of crank bearing wear fault mechanics, the fault feature extraction and fault diagnosis method are further studied.
诊断结果表明，该诊断模型能够充分利用曲柄轴承不同磨损状态的模糊信息，准确地实现对曲柄轴承磨损故障的早期诊断。
The diagnosis result indicates that the diagnosis model can make full use of fuzzy information of crank bearing wear in different degrees to realize the early diagnosis of wear fault accurately.
提高了硬盘磨损，导致了故障率增加。
Increased wear of hard disks, leading to an increased failure rate.
将不会有「规划过的废弃」-指的是产品故意被设计成会磨损或故障。
There would be no "planned obsolescence, " where products are deliberately designed to wear out or break down.
在维修时，这个设备还可以用于下载数据显示磨损情况、故障或可能的故障。
In maintenance, this facility can be used to download data indicating wear, failures or likely failures.
时间的增长，齿轮泵会出现泵油不足，甚至不泵油等故障，主要原因是有关部位磨损过大。
With the growth of the use time, pump will appear pump oil shortage, don't even pump oil fault, the main reason is the related parts excessive wear.
基于磨粒识别分析的结果，并结合摩擦学理论，实现对发动机磨损状态检测与故障诊断。
Depending on the result of debris analysis and combing with tribology knowledges, we can diagnose and predict wear fault of engine.
磨损规律和机械故障诊断等研究都离不开磨粒分析技术。
The study of wearing rules and mechanical fault diagnoses is based on wear particle analysis.
铁谱磨粒分析技术，可从微观角度对动态过程进行监测，以预测、诊断和及时处理非正常磨损早期故障。
The early malfunction of abnormal wear can be predicted, diagnosed and handled in time by using ferrography to monitor the running procedure from the microscopic view.
利用铁谱分析技术和振动分析技术中的时频分析方法研究了模拟点蚀故障齿轮磨损与振动的关系。
The relation of wear and vibration of gear of simulating pitting fault was studied by using ferrographic analysis and the time and frequency spectrums of vibration analysis technology.
铁谱技术是以磨损磨粒分析为基础的故障诊断方法。
The ferrography is a fault diagnosis method based on the analysis of wear particle.
铁谱技术是以磨损磨粒分析为基础的故障诊断方法。
The ferrography is a fault diagnosis method based on the analysis of wear debris.
该文对该厂双螺旋输送机的输送能力及所需功率进行了核算，并介绍螺旋旋芯磨损严重、螺旋轴弯曲、串轴等故障进行技改的情况。
The transportation capacity and needed power of the conveyor are examined, with a description of the modification to the conveyor in its roller damage, axis bend, axis in series etc.
该文对该厂双螺旋输送机的输送能力及所需功率进行了核算，并介绍螺旋旋芯磨损严重、螺旋轴弯曲、串轴等故障进行技改的情况。
The transportation capacity and needed power of the conveyor are examined, with a description of the modification to the conveyor in its roller damage, axis bend, axis in series etc.
应用推荐