该智能磨边机使玻璃的磨削精度和磨削速度均得到显著提高。
The precision and speed of glass milling of this Intelligent Glass Milling Machine are greatly improved.
与普通磨鞋相比，该磨鞋磨削速度快、使用寿命长，对降低钻井成本具有积极意义。
Comparing with common milling shoes, this new type of milling shoes has faster milling rate and longer life and has an important effect on reducing drilling costs.
研究结果表明，磨削pcd材料时存在一个最佳磨削速度范围，在此范围内磨削成本最低、磨削效率较高。
Research results indicate that there is an optimum grinding speed range during grinding PCD in which the lowest cost and higher efficiency can be realized.
试验结果表明，采用较大的法向压力或适当增大磨削速度等磨削参数，可以高效发挥陶瓷刚玉砂带的磨削性能。
The results indicate that increasing the vertical pressure or grinding speed is beneficial to the grinding process of ceramic corundum abrasive belt.
本文对高性能陶瓷材料的磨削性能进行了探讨，并分别从材料的磨削方式、磨削速度和磨削深度等方面分析和研究其对材料磨削性能的影响。
The grinding performance of high capability pottery is discussed in this paper. The effect on grinding quality from grinding modes of materials, grinding velocity and grinding depth are analyzed.
研究发现：砂轮速度和磨削深度对表面粗糙度的影响都可归结为未变形切屑厚度的改变。
It is found that the surface roughness influenced by wheel speed and grinding depth can be attributed to the changing of undeformed chip thickness.
纵向磨削时，修整速度对砂轮堵塞深度和堵塞面积影响最大；
For longitudinal grinding, dressing speed is the biggest influence factor on the depth and area of grinding blockage.
砂轮本身的结构特点可保证高点磨削的实现，而磨削等概率性则依赖于：生坯球合适的自旋速度及自旋轴方向的随机变化。
The structure of grinding wheels can realize high point grinding, and the good grinding equiprobability lies on a proper spinning speed and the random variation of the spinning axis.
实验结果表明：系统原理正确，平衡精度高，速度快，能显著地提高磨削质量。
This test results have shown that the system is correct in principle, fast in balance speed, high in balance accuracy and can remarkably improve grinding quality.
定子曲线的磨削质量主要受工作台的运动精度和磨削点线速度的影响。
The quality of stator curve precision grinding is influenced by the movement accuracy of workshop and linear velocity of grinding.
提高砂带速度、工件转速以及增大砂带磨粒粒度可有效地提高花岗岩的磨削效率。
With the increase of grinding speed or the abrasive grain size of the grinding belt, the grinding rate increases.
为了消除以上弊端，我们设想找出凸轮各磨削点移动速度规律，使凸轮作恒线速磨削。
In order to avoid those disadvantages, we assume that the CAM part rotates in different rates to make the speeds of every grinding point equal.
具有自动检测、补偿、报警功能，其砂轮进给速度、进给量、磨削压力和送料盘的转速都可以通过显示屏进行编程。
The feed speed and quantity of the grinding wheel, grinding pressure, rotating speed of the feeding plate all can be programmed on the computer screen.
本机适用于不同尺寸和厚度的平板玻璃直边及两个棱角的磨削，机器采用无级变速器，可在运行中任意调节加工速度。
This machine is suitable for grinding flat glass straight-line edges and two corners of different sizes and thickness. Its speed can be adjusted by stepless regulator at random.
从单颗金刚石最大切削厚度的角度，分析了磨削深度、进给速度和砂轮线速度对磨削力的影响。
The influence of depth of grinding, feed rate and circular linear speed of the grinding wheel on the grinding forces with respect to the maximum chip thickness of a single active diamond was analyzed.
研究结果表明，对于微晶玻璃等脆性材料，其表面粗糙度主要与砂轮的平均磨粒尺寸、砂轮速度、进给量及磨削深度等因素有关。
It is showed that the surface roughness is mainly related with the average grain size and feed per wheel revolution for the brittle materials such as single crystal silicon.
和普通砂带磨削相比，超声砂带精密磨削可降低加工表面粗糙度和提高加工速度。
As compared with the ordinary abrasive-band grinding, the ultrasonic abrasive-band precise grinding can lower the roughness of machined surface and raise the removal rate.
研究表明增加砂轮线速度可以降低磨削力、工件的表面粗糙度和砂轮的磨损，或者可以提高生产效率。
It has been proved that increasing the speed of the grinding wheel can lead to a reduction in grinding forces, grinding wheel wear, and in workpiece surface roughness, or an increase in productivity.
讨论了砂带粒度、砂带线速度、接触轮硬度、磨削深度和磨削进给速度对表面粗糙度的影响规律。
The influences of abrasive grain size, belt speed, contact roller's hardness, grinding depth and grinding feeding speed on surface roughness were discussed.
抛光加工与磨削加工方式基本相同，所不同之处是抛光加工所采用的磨料粒度比磨削要细得多，抛光速度也大。
Polishing and grinding the same way, the difference is polishing the abrasive particle size used to be much thinner than the grinding, polishing speed is also large.
磨削不崩边、速度快、锋利、耐磨等优点。
Grinding not collapse edge, speed, sharp, wear-resisting, etc.
磨削不崩边、速度快、锋利、耐磨等优点。
Grinding not collapse edge, speed, sharp, wear-resisting, etc.
应用推荐