通过正交试验研究了磨削参数对船用螺旋桨叶片表面粗糙度的影响。
The effects of grinding parameters on surface roughness of Marine propeller blade were studied by using orthogonal test.
本文分析了砂轮表面特性和修整对磨削表面粗糙度的影响；
This paper analyze the influence of grinding wheel surface characteristics and dressing on grinding roughness of surface.
大多数计算磨削表面粗糙度的理论公式都是基于砂轮表面磨粒与工件表面的几何创成机理建立的。
Most of the theoretic formulas to calculate the ground surface roughness are based on the geometrically generating interaction between grits and workpiece surface.
高速超高速磨削是提高磨削效率、降低工件表面粗糙度和提高零件加工质量的先进加工技术。
High speed grinding and ultrahigh speed grinding is an advanced processing technique which can raise grinding efficiency, reduce work surface roughness and promote machining quality of the parts.
切削力、磨削力和磨削表面粗糙度是表征切削加工和磨削加工的最重要特征量，对它们进行预测分析和过程控制具有十分重要的意义。
Cutting force, grinding force and surface roughness of grinding are the most important parameters to scale machine progress, thus precision methods for them is needed in engineering.
并将磨削力、磨削表面粗糙度与普通磨削进行了比较。
Grinding force and surface roughness of ELID grinding compared to conventional grinding were also analyzed.
砂带磨削中，表面粗糙度是被磨工件表面质量的一个重要的技术指标。
Workpiece surface roughness is an important technical index in evaluating the ground quality of belt grinding.
研究结果表明，对于微晶玻璃等脆性材料，其表面粗糙度主要与砂轮的平均磨粒尺寸、砂轮速度、进给量及磨削深度等因素有关。
It is showed that the surface roughness is mainly related with the average grain size and feed per wheel revolution for the brittle materials such as single crystal silicon.
本文从分析动压轴承的弱点出发，着重就砂轮不平衡量对磨削表面粗糙度的影响作了探讨。
In this paper the influence of wheel unbalance on the ground surface roughness is investigated in consideration of the disadvantages of dynamic pressure bearing.
实验表明，在适当的加上条件下，砂带振动磨削不仅可以降低工件的表面粗糙度，而且可以提高工件的形状精度。
It is proved by experiments that under appropriate machining conditions, abrasive belt vibration grinding can not only reduce workpiece surface roughness but also improve work-piece form accuracy.
本文对磨削工艺参数与砂轮修整轨迹对成形磨削表面粗糙度的影响进行实验研究。
Experimental investigations on the influence of both grinding process parameter and turning and dressing on the surface roughness of the ground workpiece are conducted.
通过实验，对砂轮平衡精度与磨削加工工件表面粗糙度之间关系作了深入的研究。
This article researched the relationship between balance precision of the grinding wheel and the ground surface roughness.
建立了采用人工神经网络方法预测砂带磨削铝合金时磨削力和磨削表面粗糙度的分析模型。
An analysis model which can predict grinding force and surface roughness of aluminum alloy with abrasive belt grinding by using artificial neural networks was established.
研究发现：砂轮速度和磨削深度对表面粗糙度的影响都可归结为未变形切屑厚度的改变。
It is found that the surface roughness influenced by wheel speed and grinding depth can be attributed to the changing of undeformed chip thickness.
超高速磨削可提高磨削效率、提高零件加工精度和工件表面粗糙度，是一项具有广阔应用前景的技术。
The promising super speed grinding technology can enhance grinding efficiency, improve surface quality of work piece and reduce its surface roughness.
都包括在内，总共有12个变量，磨削表面粗糙度的影响，并提出了7个主要的变量和模糊规则的隶属函数。
A total of 12 variables which have effect on the grinding surface roughness were included, and the membership functions of the 7 major variables of them and their fuzzy rules were presented.
在研究砂轮结构的基础上得出砂轮磨粒分布的随机性是磨削加工能产生表面低粗糙度值的重要因素。
According to the research on wheel structure, the random distribution of grains of wheel is an important factor producing better roughness on ground surface.
低粗糙度磨利通常采用低速磨削。
Low speed grinding is commonly, used to obtain low surface roughness.
研究表明增加砂轮线速度可以降低磨削力、工件的表面粗糙度和砂轮的磨损，或者可以提高生产效率。
It has been proved that increasing the speed of the grinding wheel can lead to a reduction in grinding forces, grinding wheel wear, and in workpiece surface roughness, or an increase in productivity.
探讨橡胶接触轮硬度、每次进给的磨削深度、磨削力和砂带磨损对工件表面粗糙度的影响。
The hardness of the rubber contact wheel, the grinding depth of the workpiece per feed once.
工程陶瓷通常采用的加工方法是磨削，磨削表面粗糙度对零件使用性能具有很大的影响。
Grinding is usually used for engineering ceramics. The roughness of the ceramic surface has great influence on its performance.
本文研究了三种磨削液对磨削力、金属磨除率、表面粗糙度和烧伤程度的影响。
The Influence of three grinding fluids on grinding force, metal material removal rate, surface roughness of ground workpiece, and the extent of grinding bum were investigated in this paper.
本文应用表面粗糙度参数和磨损率，研究增韧莫来石材料磨削、珩磨及平顶珩磨表面的耐磨性能。
The machined surface of zirconia toughened mullite obtained by grinding, honing and flat-top honing were studied.
面对高品质零件的公差及表面粗糙度要求，采用传统的磨削加工存在一定的挑战。
It is a challenge for conventional grinding techniques to fulfill the tolerance and surface roughness requirements when it comes to the production of high-quality components.
介绍了采用人工神经网络方法预测磨削力和磨削表面粗糙度的分析模型。
An analysis model which can predict grinding force and surface roughness grinding works by using artificial neural networks is introduced.
本文主要论述修整参数对砂轮表面地形的影响，借助微型计算机和透射电子显微镜还对高速低粗糙度磨削机理进行了一些探讨。
Especially, this paper is to deal with the effect of the dressing parameters on the grinding wheel surface topography, and, by means o...
本文主要论述修整参数对砂轮表面地形的影响，借助微型计算机和透射电子显微镜还对高速低粗糙度磨削机理进行了一些探讨。
Especially, this paper is to deal with the effect of the dressing parameters on the grinding wheel surface topography, and, by means of microcomputer and electronic microscope, the mechanism of...
和普通砂带磨削相比，超声砂带精密磨削可降低加工表面粗糙度和提高加工速度。
As compared with the ordinary abrasive-band grinding, the ultrasonic abrasive-band precise grinding can lower the roughness of machined surface and raise the removal rate.
通过在线监测磨削拳数。所提供的预测方法可以实现对工件表面粗糙度的在线预测。
By monitoring the grinding parameters, this proposed method can realize on-line prediction for the workpiece roughness.
通过在线监测磨削拳数。所提供的预测方法可以实现对工件表面粗糙度的在线预测。
By monitoring the grinding parameters, this proposed method can realize on-line prediction for the workpiece roughness.
应用推荐