通过对砂带磨削机理的分析，选定用砂带磨削玻璃管端面及外圆。
Upon the analysis of the mechanism about grinding of abrasive belt, grinding the end face and outside of the glass tube with abrasive belts is chosen.
这些研究结果对完善磨削机理和强力砂带平面磨削工艺在我国广泛应用具有重要的理论和实践意义。
The results are of significance for improvement of its grinding mechanics and applying the process into applications in China.
包括工程陶瓷材料难加工的理论基础研究，磨削机理，超精密磨削，高效磨削加工等方面的研究动态。
The main subjects for ceramic machining researches include the hard-difficult machining theory, the grinding mechanism, precision grinding and high efficiency grinding.
分析了磁力研磨加工过程中单个磁性磨粒的受力状况和磨削机理，论述了磁性磨粒的性能要求和制备工艺。
The stress and grinding mechanism of a single magnetic abrasive grain in the magnetic abrasive finishing are analyzed. The required properties and preparation technologies of MAGS are discussed.
本文通过观察聚晶金刚石(PCD)磨削表面的微观形貌及背散射立体像，研究了PCD材料的磨削机理。
Through observing the microcosmic image and back-scattered three-dimensional picture of the ground surface of polycrystalline diamond (PCD), this paper studied the grinding mechanism of PCD material.
为了降低工程陶瓷的加工成本，提高磨削后的表面质量，依据陶瓷磨削机理，提出开发物理仿真平台的方法。
The method of building physical simulation platform was presented in order to descend the process cost and improve the surface quality according to the properties of engineering ceramics.
本文主要论述修整参数对砂轮表面地形的影响，借助微型计算机和透射电子显微镜还对高速低粗糙度磨削机理进行了一些探讨。
Especially, this paper is to deal with the effect of the dressing parameters on the grinding wheel surface topography, and, by means o...
本文主要论述修整参数对砂轮表面地形的影响，借助微型计算机和透射电子显微镜还对高速低粗糙度磨削机理进行了一些探讨。
Especially, this paper is to deal with the effect of the dressing parameters on the grinding wheel surface topography, and, by means of microcomputer and electronic microscope, the mechanism of...
通过对陶瓷刀具材料磨削机理的分析，探讨了影响陶瓷刀具材料磨削的各种工艺因素，并在此基础上提出采用缓进给成形磨削陶瓷刀具材料的工艺方法。
The grind-hardening for two kinds of widely used middle carbon steels were carried out on a surface grinder by creep feed dry grinding, and the characteristics of the hardened layer were studied.
本文对外圆切入磨削时的一些机理进行了实验研究。
In this article, some mechanisms in cylindrical plunge grinding are studied experimentally.
大多数计算磨削表面粗糙度的理论公式都是基于砂轮表面磨粒与工件表面的几何创成机理建立的。
Most of the theoretic formulas to calculate the ground surface roughness are based on the geometrically generating interaction between grits and workpiece surface.
本文介绍了陶瓷磨削的材料去除机理方面的研究进展，就其进行了一定的讨论，并得出相关的结论。
This paper introduced the progress of the study on material removal mechanisms in ceramic grinding, some conclusions and Suggestions are given.
介绍了陶瓷磨削的材料去除机理方面的研究进展，就其进行了一定的讨论，并得出相关的结论。
In this paper the development of the investigations of material removal mechanisms in ceramic grinding is described, and some discussions and conclusions are given.
本文通过对双端面磨削的加工机理进行分析，指出不同的加工方法对产品质量的影响是不同的；
By analyzing processing mechanism of double-width grinding, it's pointed in this article that different processing method will leave different effect to the quality of products.
针对凸轮的磨削特性及金相因素对裂纹敏感性的影响，分析了裂纹的发生及扩展机理。
By analyzing the characteristic of CAM grinding and the effect of microstructure on the sensibility of cracks, the mechanism of crack initiation and propagation are investigated.
在轴承套圈的磨加工过程中，通过对磨削裂纹机理的分析，采取有效的措施控制磨削裂纹的产生。
In the processing process in the bearing ring, through to the grinding crack mechanism analysis, the effective measure of control grinding crack was adopted.
在此基础上，建立了陶瓷镜面磨削塑性变质层的物理模型，并用微刃切削理论解释了表面晶粒的碎化机理。
Based on these, the physical model of plastic degenerating layer has been established and the fractional mechanism of surface crystal particles has been explained by micro-edge cutting theory.
在磨削加工过程中产生表面残余应力，其产生机理是磨粒刃作用引起的挤压应力和切削应力及热应力的综合作用效应。
The production mechanism of the surface residual stress producing in grinding process is the combined effect on extrusion stress and the cutting stress and the thermal load.
对比磨削能的特征、形成和分配机理也进行了研究。
The paper also investigated the characteristics, formation and distribution mechanisms of specific grinding energy.
论文对电火花加工理论进行了分析研究，初步探讨了电火花磨削加工机理。
In this paper, EDM theory was firstly analyzed according to the documentation mainly, and the mechanism of rotary EDM was then discussed.
阐述了电解磨削硬质合金刀具的原理、特点及工艺。并对其工艺机理及影响因素进行了探讨。
This paper introduces the principle characteristic and the technological of electrolytic grinding working hard alloy cutter. The technological principle and the effectors are investigated.
研究了陶瓷磨削表面变质层的产生机理。
The generating mechanism of grinding surface degenerating layer of the ceramics is studied.
阐述了三种磨粒损伤产生的机理和磨削力变化的成因。
The paper also discussed the mechanism of grain damage and the causes of grinding force variations.
通过对表面活性剂在磨削过程中作用机理的研究，同时采用高效精密砂带磨削技术，实现花岗石平板的高效精密加工。
High efficiency in the precise grinding of granite plate is realized based on the research of the mechanism of surfactant in granite grinding and the application of belt grinding technology.
阐述了超高速磨削的机理，介绍了磨削中的尺寸效应和比磨削能。
The mechanism of super high grinding, the size-effect and specific grinding energy in grinding were introduced.
文中针对超高速磨削加工的特殊要求，分析研究了磨削液在高速加工中的作用机理及特性。
Aiming at the special require of ultra-high speed grinding processing, the mechanisms and characteristics of grinding fluids in ultra-high speed grinding processing is investigated.
试验还进行了磨削过程中磨削力的测试和比磨削能的计算，分析了陶瓷材料的去除机理。
Measure the grinding force in grinding process and compute the grinding energy ratio, analyzing the grinding mechanism.
本文探讨了磨削叶片材料(1cr13)时砂带的磨损机理。
This paper described the grit wear mechanisms of abrasive belts when grinding blade material (1cr13).
对氮化硅陶瓷磨削表面进行实验观察，从理论上分析了陶瓷材料的加工机理，提出了陶瓷的半延展性磨削模型。
This article analyses the material - removal mechanisms in grinding ceramics, and advertences the grinding model of ceramics semi - ductile regime grinding.
分析了难加工材料磨削弧区强化换热的机理；
The mechanism of workpiece burn in grinding difficult to machining materials is analyzed.
应用推荐