通过多次实验，将单涂层与复合涂层硬质合金的刀具寿命作了比较。
In this paper, the experiment was designed to study tool with single coating layer and several coating layers.
硬质合金刀具的氧化磨损主要发生在刀具前刀具和后刀面的磨损边缘区。
Oxidation wear appeared at the wear edge of rake face and flank face of cutting tool.
采用导电加热切削技术切削淬硬钢的特点在于：可以采用普通机床、硬质合金刀具对淬硬钢进行硬车削加工。
The feature of machining harden steel by means of EHM are: it can utilize the carbide tool to machine the harden steel in engine lathe.
我们的目标是：做中国最专业的硬质合金刀具生产商！
Our goal is: Does China's most professional manufacturer of Carbide Tools!
在微波等离子体化学气相沉积装置中，研究了负偏压形核对金刚石薄膜与WC 6 %硬质合金刀具附着力的影响。
The influence of bias enhanced nucleation(BEN) to the adhesion between diamond coating and WC-6%Co carbide cutting tool is researched with the microwave plasma (CVD) instrument.
适用于硬质合金刀具，工件及有色金属，非金属等的磨削。
It is suitable for the grinding of cutting tools and workpieces of hard alloy and non-ferrous metal and non-metal materials etc.
当切削刀具的刀柄足够大时，当切削刀具的刀柄足够大时，可行的技术是在中碳钢刀柄上用铜焊接硬质合金刀尖。在中碳钢刀柄上用铜焊接硬质合金刀尖。
When the shank size of a cutting tool is large enough, a more viable technique is to braze the carbide tip to a medium carbon steel shank.
本机床主要适用于高速钢、硬质合金及陶瓷刀具切削加工黑色金属、有色金属及部分非金属零件的内外圆柱面、内外圆锥面、沟槽、平面。
This series machine is suitable of ferrous, nonferrous metal and some kinds of non-metal materials with hard alloy, high capacity and high speed steel tools.
金刚石薄膜涂层硬质合金刀具是CVD金刚石薄膜的重要应用领域之一。
The cemented carbide tool coated with diamond film is one of the important application of CVD diamond film.
通过理论分析和试验研究，探讨硬质合金刀具在变速切削条件下磨损累积的规律。
With theoretical analysis and experimental research, the regularity of wear cumulation of carbide tools under varying cutting speed conditions is studied.
提高金刚石薄膜与硬质合金基底之间的附着力是CVD金刚石薄膜刀具得以推广应用的关键因素。
To extend the applications of CVD diamond coated tools, the improvement of adhesion between the diamond film and cemented carbide substrate is a key factor.
通过对硬质合金刀具前刀面月牙洼磨损图像特征的分析，设计了检测磨损的算法，并开发了相关软件。
Through the analysis of image characteristic of crater wear in kentanium tool front face, arithmetic monitoring wear is designed, correlative software is exploited.
对不锈钢切削加工中使用最多的硬质合金涂层刀具进行了研究。
The coated cemented carbide tools which are most widely used in cutting of stainless steel is investigated.
阐述了电解磨削硬质合金刀具的原理、特点及工艺。并对其工艺机理及影响因素进行了探讨。
This paper introduces the principle characteristic and the technological of electrolytic grinding working hard alloy cutter. The technological principle and the effectors are investigated.
分析了硬质合金微型钻头加工时的受力状态，根据钎焊硬质合金刀具的强度指标要求，研究了刀具焊接强度的检测方法。
The cutting loads of cemented carbide drilling tool in drilling PCB are analyzed, a method applied to testing the brazing strength of cemented carbide cutters is studied.
阐述了电解磨削硬质合金刀具的原理、特点及工艺。
This paper introduces the principle characteristic and the technological of electrolytic grinding working hard alloy cutter.
本文针对高速钢刀具和普通硬质合金刀具的主要磨损形式，设计了一种新型的刀具耐磨涂料。
This article in the light df the main wear type of high speed steel tool and common hard alloy tool, design 'es a new kind wear resistance coating.
利用强激光模拟实验，对硬质合金刀具在端铣过程中的温度变化规律进行了模拟。
The actual milling temperature regularities of cemented carbide tools are studied by high-power laser simulation.
对整体硬质合金刀具磨削裂纹的产生原因进行了分析和探讨，并提出了有效防止整体硬质合金刀具磨削裂纹的工艺改进措施。
The reason for grinding cracks of solid carbide cutting tools is analyzed and the procedure improvement ways to effectively prevent grinding-cracks of solid carbide cutting tools are put forward.
结果表明：脉冲磁化处理能够提高硬质合金及高速钢刀具的耐磨性能，可以显著地提高硬质合金及高速钢刀具的使用寿命。
The results show that pulse magnetization can improve the wear resistance of these materials and increase the lifetime of the tools made of these materials.
本文针对硬质合金刀具切削中硅铝合金活塞槽存在的问题，研制出一种新型人造金刚石切槽刀。
For the problems that exist in cutting medium silicon aluminium alloy piston grooves with carbide tools, this paper presents a new kind of artificial diamond grooving tool.
阐述了可转位硬质合金刀具非正常损坏的原因并提出一些注意事项和改善办法。
This paper elaborates non-normal damage cause of reversible carbide tool and puts forward some of attentive matters and improvement ways.
通过现场正交优化试验，对经过脉冲磁化处理的硬质合金及高速钢刀具的耐磨性能进行了研究。
An experimental study on the wear of pulse magnetized cemented carbide and high speed steel tools has been carried out according to the orthogonal design scheme.
该机可用于磨削各类形似半圆角或反锥角的高速钢和硬质合金雕刻刀具和单边或多边刀具。
For grinding HSS and carbide engraving cutter as well as single lip or multiple lip cutters of various shapes such as radiused cutters or negative taper Angle of cutters.
它是用硬质合金刀具以旋转或者成形的方法把钢管加工成外圈或者内圈的。
Steel is either turned or formed via carbide tooling into a cup or cone.
用细晶粒硬质合金刀具进行了铁基粉末冶金零件的高速干切削试验。
The dry and high-speed cutting experiments are carried out to study the cutting performance of turning the Fe-based PM parts by using the fine grain cemented carbide inserts.
对硬质合金整体立铣刀高速铣削加工航空铝合金时的刀具磨损形态及其磨损机理进行了观察和分析。
The wear patterns and wear mechanisms of solid cemented carbide are analyzed in high-speed milling of aluminum alloy.
文中依据微分几何中的包络原理，从砂轮和刀具之间的运动关系出发，建立新构形法硬质合金插齿刀前刀面的数学模型。
The article rests on enveloping principle of the differential geometry, embarks from the movement relations between grinding wheel and the cutting tool, establishing mathematical model of rake face.
文中依据微分几何中的包络原理，从砂轮和刀具之间的运动关系出发，建立新构形法硬质合金插齿刀前刀面的数学模型。
The article rests on enveloping principle of the differential geometry, embarks from the movement relations between grinding wheel and the cutting tool, establishing mathematical model of rake face.
应用推荐