以布氏硬度实验、塑性接触变形实验为主要研究手段，以金属的小接触变形为假设前提。
The test of Brinell hardness and strength of plastic contact are used as the main investigative means in this paper, and little deformation of metal is presumed.
结果表明，硬度实验类似于压缩实验中的镦粗，硬度计压头可使金属基体发生塑性变形及粘性流动。
It demonstrated that the experiment of hardness is likely to upset in the experiment of compression. Hardness tester indenter make matrix metal plastic deformation and viscous flow happen.
通过对金属洛式硬度C标尺的不确定度评定与分析，介绍了不确定度的基本原理及其在硬度实验中的实践应用。
The basic principles and practical applications of measurement uncertainty are introduced by evaluating and analyzing measurement of metal Rockwell hardness c.
通过对金属在洛氏硬度实验检测中的不确定度的分析与计算，介绍不确定度的评定在洛氏硬度实验检测中的作用。
The effect of uncertainty evaluation in Rockwell hardness test is described by analyzing and calculating the uncertainty of metal in Rockwell hardness test.
利用X射线衍射技术并结合金相组织观察和显微硬度实验，研究了冷轧工业纯钢在电场作用下的再结晶及织构演变规律。
The effect of electric field on the recrystallization and recrystallization texture development in cold-rolled copper was studied by X-ray diffraction (ODF analysis) combined with optical microscopy.
经实验结果显示其硬度与弹性模数皆会随著溅镀功的增加而增加。
The results show that the hardness and elastic modulus increase as the sputter power increases.
在间歇式实验制粉系统上研究了硬度和水分调节对小麦研磨特性的影响。
The influence of hardness and conditioning on milling properties of wheat was investigated on a batch-type experiment milling system.
英斯特朗拉力测试，硬度测试及合金识别设备，在行业内完善了最完整的内部实验室之一。
Indira Strong tensile testing, hardness testing and alloy identification equipment, in the industry to improve the most complete internal laboratory.
对多孔锯片及非等间距锯片进行了锯切三种不同硬度的混凝土的实验研究。
By cutting different hardness concrete experiment, the cutting characteristics of the special saw with holes or different width segment have been studied.
实验结果表明，复合镀层具有较高的硬度和耐磨性。
The experimental results show that, the composite coatings have higher hardness and wear resistance.
设计了材料学实验中的硬度试验的操作过程。
The using processes of material hardness tester in materials science experiment were described.
由实验的结果来看，极限碳酸盐硬度法简便、捷、现性好，可信度高。
The results of the experiment sh ow that the limited carbonate hardness method is simple, quick and effective.
研究了各种实验参数对沉积速率、薄膜组成及膜层硬度的影响，认为偏压是最具影响的参数。
The influence of various experimental parameters on deposition rate film composition and hardness has been studied, Bias is considered as the most effective Darameter.
利用等温回火实验，采集了淬火钢在不同条件下回火时的硬度数据。
The hardness data of quenched steel under different conditions were collected utilizing austempering tests.
实验研究证实，通过氮离子注入的方法对钽基材进行表面强化，可大大提高钽材的表层硬度及耐蚀性能。
This test has been shown that the hardness and the anti-corrosion properties of the Ta-surface will be greatly improved by use of the N-ion implantation.
通过实验证实，玉米的抗粉碎硬度指数可作为反映玉米最佳去皮脱胚效果所需着水量的一个指标。
The experiment results showed that the maize anti-grinded hardness index could be used as an needed damping quantity index to get the best technological effects in maize hulling and degerming.
实验发现，高应力冲击磨损后，磨损试样表层形成高硬度的白层与变形层。
The experimental results show that the high hardness white layer and plastically deformed zone are developed on the surface layer under high stress impact wear.
实验结果表明，振动力场的作用可以提高TPE的拉伸强度、100%定伸应力和扯断伸长，改善TPE的硬度。
The experimental results show that, under vibration force field, tensile strength, tensile stress at 100% and elongation at break of TPE can be enhanced, and hardness(shore A) of TPE can be improved.
实验结果表明：增加超声波功率，导致镀层硬度增大。
The experimental results show that the increase in ultrasonic power leads to the increase in hardness of the coating obtained.
公司建立了集高低温、拉伸压缩、燃烧、硬度、色差等多项实验和检测的多功能实验室。
The company has established a multi-functional laboratory, where many experiment and test can be carried on, such as, low temperature, stretch, combustion, hardness and color difference, etc.
本文主要针对陶瓷材料磨削表面残余应力对疲劳磨损和表面硬度的影响进行实验研究。
Effect of surface residual stresses by ceramic grinding on fatigue wear property has been researched by experiment.
公司还拥有硬度计、金相显微镜、力学性能实验机，无损探伤等设备。
The company also owns hardness, metallographic microscope, the mechanical properties of aircraft, non-destructive flaw detection equipment.
实验证明，该算法满足对布氏硬度计压痕直径的测量要求。
The experiment has proved that the algorithm can satisfy the need of the indentation diameter measurement.
结果表明：硬度预测值与实验值相对误差的绝对值的平均值为5.90%，附着力预测准确率为100%，耐冲击性预测准确率为100%。
The results show that the average absolute value of relative errors between predictive and measured values of hardness is 5.90%, the prediction accuracies of adhesion and impact resistance are 100%.
实验研究证实，通过氮离子注入的方法对钽基材进行表面强化，可大大提高钽村的表层硬度及耐蚀性能。
In this paper, it has been shown that the hardness and the anti-corrosion properties of the Ta-surface will be greatly improved by use of the N-ion implantation.
并对涂层的显微组织、显微硬度和室温干滑动实验进行了具体分析。
The microstructure, microhardness and dry-sliding wear resistance of the coating were evaluated.
并对涂层的显微组织、显微硬度和室温干滑动实验进行了具体分析。
The microstructure, microhardness and dry-sliding wear resistance of the coating were evaluated.
应用推荐