金相和硬度分析未发现明显异常组织和硬度分布。
No abnormity was found in the metallographical analysis and hardness test.
借助扫描电镜、显微硬度分析了复合材料界面结构及力学性能。
By means of scanning electron microscope and micro-hardness, the interfacial structure and mechanical properties of the metal composite were analyzed.
对焊接接头进行了拉伸强度测试、断口分析、金相组织分析、显微硬度分析。
Tensile testing, fracture analysis, microstructure analysis, hardness test were carried out on the welded joint.
通过对进口切粒机动刀材质硬度分析和金相分析,确认其可使用的最小外圆直径。
Through analyzing material hardness and metallography of moving knife of import cutter, its minimum round diameter outside used is confirmed.
用金相显微镜、EDS和显微硬度计对其焊接接头进行了显微组织、成分分布和硬度分析。
Microstructure and hardness of the joint were analyzed by optical metallurgical microscope, EDS and micro-hardness tester.
最后从结构、成分、颜色、透明度、硬度、韧度及块度等对南郑蛇纹石玉进行了客观分析及质量评价,并对其开发前景进行了展望。
Last, Nanzheng Serpentine's quality evaluation was infected by it's structure, component, color, transparence, hardness, resilience and size and it's the foreground of developing was prospected.
在分析布氏硬度试验压痕图像基础上,提出基于属性直方图的图像分割算法。
Based on the analysis of the features of brinell hardness test indentation image the applied image segmentation algorithm based on the histogram of the indentation image is put forward.
采用宏观分析、显微检验和硬度测定对压铸模进行了失效分析。
This failure analysis was performed by using macro check, micrography and hardness measurement.
用显微硬度仪测定合金的硬度,分析其硬度随氧化时间变化的情况,绘制该钢的显微硬度随时间变化的曲线。
The hardness of the alloy following the change of time was analyzed by micro- hardness instrument and the alloy's hardness curve following the change of time was drawn.
对已开裂断线钳钳头的显微组织、化学成分和硬度进行了检测和分析。
The microstructure, chemical composition and hardness of cracked jaws of wire clippers were detected and analyzed.
对45钢连接螺栓断裂件的显微组织、断口形貌、硬度和抗拉强度进行了观察分析和测试。
The microstructure, surface fracture morphology, hardness and tensile strength of the failed 45 steel connecting bolt were analyzed and tested.
本文用电镜观察、拉伸试验、硬度试验、差热分析等方法研究了45钢冷形变后的预多边化处理对随后的回复、再结品过程的影响。
Studies the effect of the pre-polygonization heat-treatment on the recovery and recrystallization of cold-deformed steel 45 by TEM, tensile test, hardness test and thermal analysis.
通过潜油电机轴的微观金相组织观察和硬度测试,分析了三种电机轴的组织结构和性能特点。
The micro-structure and the hardness of the submersible electro-motor shaft were analyzed and tested, and the performance of the electro-motor shaft was investigated.
对断裂的金属接骨螺钉进行了化学成分、硬度、显微组织分析及表面加工质量的检测。
The analysis of chemical composition, hardness and microstructure and quality inspection of surface processing have been done to metal bone screw which was fractured in human body.
利用宏观分析、显微检验、硬度测试和装车试验等手段,对引进奥地利重型汽车内齿圈按照新的气体氮碳共渗工艺处理后的质量进行了研究。
The quality analysis for gas nitrocarburized inner gear ring of heavy truck imported from Austria was taken by means of macro/micro-examination, hardness measuring and running test.
分析了高硬度辊皮的磨损情况;改进了辊皮的切削方案;满足了生产需求并提高了作业率。
The wear conditions of high hardness roller sheet are analysed and cutting projects of roller sheet are improved.
纳米压痕技术广泛用于材料力学性能的评估与测试,利用压痕的加卸载曲线可分析得到材料的硬度和折合模量等力学参数。
Nanoindentation has been widely used to evaluate and test material properties, we utilize the unloading curves of an indentation test to extract the hardness and reduced modulus of the material.
对淬火开裂的S45 C钢零件进行了化学成分、金相组织、断口分析及硬度检测。
The chemical composition, microstructure, fracture morphology and hardness of cracked S45C steel parts were tested and analyzed.
通过分析超声波硬度传感器的特点,提出采用超声波硬度传感器技术实现对管件镀层硬度进行现场无损测量的方法。
By analyzing the characteristic of the ultrasonic hardness sensor, a nondestructive testing method that using the ultrasonic hardness sensor technology for pipe coat is put forword.
对不同焊接热输入下的6063铝合金焊接接头进行人工时效,分析其硬度分布和强度的变化。
Effects of artificial ageing on the hardness distributions and strength were analyzed for 6063 aluminum alloy joints welded by varying heat inputs.
用X射线衍射、光镜和透射电镜对表层变形层金相组织、晶粒尺寸、显微硬度进行分析。
The surface layers are characterized by means of the optical microscope, X ray diffraction, transmission electronic microscope, and micro hardness testing machine.
通过对金属在洛氏硬度实验检测中的不确定度的分析与计算,介绍不确定度的评定在洛氏硬度实验检测中的作用。
The effect of uncertainty evaluation in Rockwell hardness test is described by analyzing and calculating the uncertainty of metal in Rockwell hardness test.
本文介绍采用通过化学成分分析、硬度测定及金相组织检测等手段,对轴承损坏原因进行分析的情况。
This paper has described and analyzed the reason of the damaged bearing by means of chemical analysis, the determination of the hardness as well as the metallographic analysis.
通过化学成分分析、硬度试验、宏观和微观检验等方法,对减速机齿轮齿面弧形裂纹的产生原因进行了分析。
The reason of arc crack on retarder gear surface was analyzed by means of chemical composition analysis, hardness testing, macrostructure and microstructure examination.
采用化学分析、金相检验和显微硬度梯度试验等方法对油压机柱塞表面淬火交界处裂纹进行了分析。
The crack in quenching boundary of the hydraulic press plunger surface was analyzed by means of chemical composition analysis, microstructure examination and microhardness testing.
采用化学分析、金相检验和显微硬度梯度试验等方法对油压机柱塞表面淬火交界处裂纹进行了分析。
The crack in quenching boundary of the hydraulic press plunger surface was analyzed by means of chemical composition analysis, microstructure examination and microhardness testing.
应用推荐