硬件缺省检测程序如图2 中所示。
在这个阶段中，第二阶段的引导加载程序会检测系统硬件、枚举系统链接的硬件设备、挂载根设备，然后加载必要的内核模块。
At this stage, the second-stage boot loader checks the system hardware, enumerates the attached hardware devices, mounts the root device, and then loads the necessary kernel modules.
它包含大量硬件驱动程序集和为检测这些驱动程序而精心制作的工具，以便普通的主机在引导时所有的硬件都处于可运行状态。
It includes an extensive collection of hardware drivers and well-crafted facilities for detecting them, so that common hosts boot with all hardware already operational.
内核将首先载入内核模块，然后检测硬件(软驱、硬盘、网络适配器等)，检验硬件配置，然后扫描和载入设备驱动程序。
The kernel will load kernel modules first, then detect hardware (floppy drive, hard disk, network adapters, etc.), verify hardware configuration, and then scan and load device drivers.
在AIX 中，cfgmgr命令会检测系统中所有的硬件设备，甚至会告诉您丢失了哪些设备驱动程序。
In AIX, the cfgmgr command detects any hardware devices present on the system and even tells you which device drivers may be missing.
当操作系统检测到一个线程空闲时，把对硬件的控制权交还给系统管理程序，这会使线程进入 nap模式。
The way it works is that the OS detects when a thread is idle and then gives control of the hardware back to the hypervisor, which puts the thread into nap mode.
给出了装置的硬件电路原理及实现检测和自动并列过程的程序流程。
The detection method of the synchronization and the flow chart of program are given.
在硬件设计的基础上，文中对系统软件设计中的检测主程序、A/D转换子程序、定时器A中断子程序和液晶显示子程序的设计进行了系统性介绍。
On the base of the hardware design, this paper introduces the main program, A/D convert subprogram, Timer A abruption subprogram and liquid crystal display subprogram of software systematic.
在文中笔者运用模块化的设计思想完成了前端和检测台的硬件电路和软件程序的设计。
The dissertation introduces design of each module's hardware circuit and software program adopted modularization thinking in Front-end and Detection Base.
在设计了车载废气检测仪的硬件电路的基础上，编制了相应的控制程序，制作并调试了氧气测试通道。
On the basis of the completed hardware circuit, the author made the programme of the control module, and debugged the oxygen channel.
具体介绍了可编程序控制器性能指标，PLC硬件配置，软件设计，编程器，操作方式以及炉膛吹扫，火焰检测及火检原理等。
The specification of programmable controller, PLC hardware configuration, software design, programmer, operation mode and furnace purging flame detection and it principle are presented concretely.
系统采用设备驱动程序编程构造状态检测模块；网络驱动程序通过NDIS程序库对调用硬件系统。
The state inspection module was built up with device driven programming, hardware system is called by using network driven program with NDIS library.
基于DSP实现了红外图像的硬件处理系统并编写了失效元处理的软件程序，实现了失效元的自动检测和校正。
With digital signal processing (DSP) chip, the hardware and software of infrared image processing system are designed for the purpose of auto-detection and correction of the invalid pixels.
本文介绍了双门限检测的基本原理，并根据该原理得出用单片机实现双门限检测的硬件电路及程序框图。
This article introduces the elementary theory of double threshold detection. By the theory design the hardware and the flowchart that double threshold detection By Microcomputer.
介绍一种无线电罗盘综合检测仪的硬件构成及软件程序设计。
The hardware structure and software design of a comprehensive detection instrument of radio compass are introduced.
XP由于采用了数字签名式的驱动程序模式，对各种硬件的检测也比以往严格，所以一些设备可能在正常状态下不能驱动使用。
Because XP used the driver pattern of type of digital sign one's name, to all sorts of hardware detect also compare before strict, so a few equipment may fall in whack cannot drive is used.
自检初始化：系统调用硬件自检程序，检测系统当前所配置的模块，并检查其工作是否正常；
Abstract: Firstly, the system structure for portable line test system is introduced, then the designs of the hardware system and system software are described.
本文介绍了基于C8051F206 单片机的汽车制动踏板力及行程检测仪的设计方案，给出了硬件线路结构图及软件程序框图。
This paper introduces a design scheme of a Monitor for Automobile Braking Force of Pedal based on single-chip computer C8051F206, The hardware structure and software program diagram was also studied.
并基于PC高性能白勺硬件资源，使得系统程序有强大白勺数据分析处理功能，满足现代岩土工程白勺现场检测需求。
And based on the high performance hardware of PC, the system has powerful data processed function to meet modern geotechnical engineering test requirement.
考虑启用系统诊断程序检测出错硬件。
Consider running system diagnostics to check for faulty hardware.
考虑启用系统诊断程序检测出错硬件。
Consider running system diagnostics to check for faulty hardware.
应用推荐